• 한국태양에너지학회 논문집
• /
• 제28권2호
• /
• pp.34-41
• /
• 2008

A low-temperature solar thermal system assisting a biological nitrogen treatment reservoir was designed and field-tested. A large tank whose temperature was maintained at about $25-30^{\circ}C$ to enhance the performance of a biological nitrogen treatment process was heated by an array of flat plate solar collectors. Test results revealed that the overall collector efficiency was above 50% for the most cases tested. This high efficiency was possible owing to the relatively low collector temperature that can be traced back to the reservoir temperature. A substantial enhancement in nitrogen treatment was observed as a result of maintaining the reservoir temperature higher.

• Steel and Composite Structures
• /
• 제44권4호
• /
• pp.545-555
• /
• 2022

Empirical relationships that capture the nonlinear behavior of headed steel shear stud anchors have been derived from standard push out tests, where the specimens are comprised of large wide flanged steel sections attached to flat concrete slabs via the anchors. However, many composite systems used in practice utilize much smaller steel members and/or steel decking as part of the slab system. Composite open web steel joist systems generally include both of these elements and consequently the nonlinear performance ofthe anchor is not accurately represented by existing models. In this paper, a new empirical relation is presented for open web steel joist systems based on experimental results from a modified push out test that more realistically represent a composite open web steel joist system. The methodology for obtaining the proposed nonlinear function where the response of the system is characterized by two parameters(α and β) is presented. The two-step process for obtaining the two parameters is described and the empirical relation is calibrated with the experimental data. In comparison with existing expressions, the new proposal herein more accurately predicts the high initialstiffness of the system and overall nonlinear system performance.

• 동력기계공학회지
• /
• 제11권1호
• /
• pp.28-32
• /
• 2007

This research proposed that development of wireless condition monitoring system using WLAN network. It offers the prospect of improved performance that removed a current a coaxial cable and reduced overall cost of condition monitoring. Recently, there is an interesting concern for wireless system as an infrastructure technology construct ubiquitous computing environment in the future. High performance computing board makes minimization with integrate of a various functions which support wireless LAN network. Instead of wired coaxial cable using measurement system in industry, wireless LAN network assists industry automation and engineer's convenience. Developed system adapted wireless LAN network on shipboard with engine room and deck house, it also executes wireless measurement test on 8500TEU containership.

• 대한안전경영과학회지
• /
• 제3권2호
• /
• pp.167-179
• /
• 2001

In this study, an overall survey of ERP system and methodology are first introduced, then an efficient way of const겨cting ERP system is suggested through a case study on S company S company has not reached the goal of ERP system as it planned and is still working on the project. The main idea for the efficient construction methodology of ERP system is that BPR (Business Process Reengineering) should be accomplished and the company should have enough time to test the ERP package and a proper ERP team organization before the ERP system is introduced. It is suggested that introduction of ERP system bring about benefits to companies in terms of effective management system.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.1974-1979
• /
• 2007

In this study, Ice slurry generator heat transfer characteristics are experimentally investigated for the ice slurry generating system with scraper which is pneumatically operated. The ice slurry generator has the same shape as the vertical double tube type heat exchanger. Refrigerant is flowing in the outside tube and ethylene glycol solution in the inside tube. Refrigerant and solution water are parallel flow type which entering bottom of generator and leaving top of generator. The experimentations are conducted under the various test conditions such as compressor speed and cooling water temperature. For the above experimental conditions, heat transfer characteristics of the ice slurry generating system are evaluated in terms of the overall heat transfer coefficient and the heat transfer rate. And the experimental results show that the heat transfer rate of the system is increased as the compressor speed increases and the cooling water temperature decreases.

• Journal of Electrical Engineering and information Science
• /
• 제3권2호
• /
• pp.211-221
• /
• 1998

It is becoming apparent that stereo matching algorithms need much information from high level cognitive processes. Otherwise, conventional algorithms based on bottom-up control alone are susceptible to local minima. We introduce a system that consists of two levels. A lower level, using a usual matching method, is based upon the local neighborhood and a second level, that can integrate the partial information, is aimed at contextual matching. Conceptually, the introduction of bottom-up and top-down feedback loop to the usual matching algorithm improves the overall performance. For this purpose, we model the image attributes using a Markov random field (MRF) and thereupon derive a maximum a posteriori (MAP) estimate. The energy equation, corresponding to the estimate, efficiently represents the natural constraints such as occlusion and the partial informations from the other levels. In addition to recognition, we derive a training method that can determine the system informations from the other levels. In addition to recognition, we derive a training method that can determine the system parameters automatically. As an experiment, we test the algorithms using random dot stereograms (RDS) as well as natural scenes. It is proven that the overall recognition error is drastically reduced by the introduction of contextual matching.

• 한국수소및신에너지학회논문집
• /
• 제17권3호
• /
• pp.279-285
• /
• 2006

Recirculation for the unreacted fuel is necessary to improve the overall efficiency of the fuel cell system and to prevent fuel starvation since the fuel cell for a vehicle application is a closed system. In case of the automotive fuel cell, the ejector which does not require any parasitic power is good for the performance improvement and easy operation. It is essential to design the customized ejector due to the lack of the commercial ejector corresponding to the operating conditions of the fuel cell systems. In this study, the design methodology for the ejector customized to an automotive fuel cell is proposed. The model based sensitivity analysis prevents the time-consuming redesign and reduces the cost of developing ejector. As a result, the customized ejector to meet the desired performance within overall operating range has developed for the PEMFC automotive system.

• 설비공학논문집
• /
• 제18권3호
• /
• pp.225-230
• /
• 2006

The overall performance and local flow fields of the fan, heat sink, and fan-sink were experimentally and numerically studied to investigate the flow characteristics of a fan-sink. The flow resistance of the heat sink was measured by small fan tester based on AMCA standards and compared with the CFD results to select available cooling fan for the fan-sink. The nonuniform velocity profile behind the fan outlet was shown by the flow visualization. The effects of nonuniform velocities on the performance of heat sink were discussed. To validate the commercial CFD code CFX-5.6, the predicted performance curve was compared with that of fan testing. The local flow fields of the fan-sink were analyzed by CFD results. MFR (multiple frame of reference) was used as a computational model combining rotating fan and stationary heat sink. Through the CFD results of the fan-sink, the flow patterns behind the fan outlet influenced the flow resistance and overall performance of the heat sink.

• 제어로봇시스템학회논문지
• /
• 제15권7호
• /
• pp.675-682
• /
• 2009

Instead of direct driving like BLDC, the induction principle is adopted as a driving one for planar stage. The stage composed of four linear induction motors put in square type is activated by two-axial forces; low-frequency attractive force and thrust force of the linear induction motors. Here, the modified vector control whose new inputs are q-axis current and dc current biased to three phase current instead of d-axis current or flux current is applied extensively to overall motion of the stage. For the developed system, the precision step test and the constant velocity test are tried to guarantee its feasibility for TFT-LCD pattern inspection. However, to exclude a discontinuity due to phase shift and minimize a force ripple synchronized with the command frequency, the initial system is revised to the antagonistic structure over the full degree of freedom. Concretely describing, the porous air bearings guide an air-gapping of the stage up and down and a pair of liner induction motors instead of single motor are activated in the opposite direction each other. The performances of the above systems are compared from trapezoid tracking test and sinusoidal test.

• 한국의학물리학회지:의학물리
• /
• 제22권1호
• /
• pp.35-41
• /
• 2011

전반적 시스템 점검(overall system test)을 위해 일반적으로 필름을 이용한 hidden-target test가 시행되어 왔으나 2차원적 측정기로 3차원적인 방사선 영역(radiation field)을 구(sphere)라 가정하고 목표 중심점을 찾는 것이 내재적 분석 오차를 야기시킨다. 본 연구에서는 겔 선량계를 이용하여 3차원적 목표 중심점 오차를 확인하고 이 기술을 소개하고자 한다. 실제 환자의 두경부를 모사할 수 있으며 10개의 겔 선량계를 내부에 삽입할 수 있는 팬텀을 제작하였고 원하는 시기에 합성과 자유로운 용기 선택이 가능한 $BANGkit^{TM}$을 겔 측정기로서 사용하였다. 필름을 이용하는 분석방법이 야기시키는 내재적 분석 오차를 정량적으로 확인 하기 위하여 2개의 방사선 영역은 타원(ellipse) 나머지 8개는 구 형태로 설정하였다. 방사선 수술 전용 선형가속기 기반의 치료기인 노발리스를 이용하여 모의 치료를 3번 반복 수행하였고 $BrainSCAN^{TM}$의 Image fusion, Drawing, Windowing setting 등의 내장 기능을 이용하여 자기공명영상 상의 방사선 영역을 추출하고 기하학적 중심 점을 측정하였다. 본 연구의 목표 중심점 분석 결과는 10개의 방사선 영역에 대해 $0.77{\pm}0.15mm$의 목표 중심점 오차가 발생하였고 각 AP (anterior-posterior), LAT (lateral), VERT (vertical) 방향으로 $0.54{\pm}0.23mm$, $0.37{\pm}0.08mm$, $0.33{\pm}0.10mm$의 방향별 목표 중심점 오차를 갖는다. 10개의 방사선영역 모두에서 목표 중심점 오차는 1 mm 이내이므로 방사선 수술을 시행하기에 적합한 치료 절차와 치료 장비를 갖추고 있음을 간접적으로 보여주었고 자기공명영상기반 겔선량측정법은 실제 방사선 영역의 체적을 이용 함으로서 겹쳐진 필름을 사용하는 기존 목표 중심점 점검기술의 한계를 보완하였다. 결과적으로, 겔 선량측정법을 이용한 3차원적 목표 중심점 점검기술은 전반적 시스템 점검을 위한 하나의 기술이 될 수 있다.