• 제목/요약/키워드: Over-charging

검색결과 167건 처리시간 0.029초

과풍속 영역에서의 약계자 제어를 이용한 풍력발전용 3상 PWM 컨버터의 출력제어 (Power Control of Three Phase PWM Converter for Small-scale Wind Power using Flux Weakening Control in Over Wind Speed Region)

  • 구현근;김재흥;이형욱;김장목
    • 전력전자학회논문지
    • /
    • 제19권2호
    • /
    • pp.149-156
    • /
    • 2014
  • This paper proposes the battery charging algorithm for small-scale wind power generator using three phase PWM converter. it is impossible to control output power of the converter in over wind speed region since back EMF of PMSG is higer than battery voltage. Therefore, battery charging algorithm is proposed to expand battery charging over wind speed region. The suggested method is using the q-axis current for battery charging in the rated wind speed region. In the over wind speed region after it lower back EMF of PMSG using d-axis current it can control output power of the converter. The validity of the proposed algorithm are verified by experiments.

반도체 스위칭 소자의 트리거 특성을 이용한 배터리 자동 충전회로에 관한 연구 (A study on the auto-charging circuit of the battery power units using trigger characteristics of semiconductor device)

  • 김영민;황종선;박성진;임종연;송승호
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2001년도 하계학술대회 논문집
    • /
    • pp.519-522
    • /
    • 2001
  • Recently, the battery charging technology and reducing technology of harmonics on AC input line are rising importantly according to increasing electrical facilities that it has been replaced battery with emergency power. In this study, I proposed that an auto-charging circuit of battery has low cost with simple-construction circuit, relative, harmonics reduction with diode tap-change method, high reliability of system for using characteristics of thyristor switching. In case of this circuit, convenience and reliability of maintenance of battery power units were more improved. 1 think that it is resulted in effect of prevention to shortening of battery life from over-charging and over-discharging and decrease of harmonics obstacle on AC input line.

  • PDF

위성 배터리 충전을 위한 전력제어유닛의 알고리즘 설계 (Design on Algorithm of Power Control Unit for Charging Satellite Battery)

  • 박정언;이병희
    • 한국위성정보통신학회논문지
    • /
    • 제12권4호
    • /
    • pp.95-99
    • /
    • 2017
  • 식 구간에서 인공위성이 필요로 하는 모든 전력을 공급하는 배터리의 수명은 인공위성의 수명과 직결된다. 배터리의 수명은 배터리 충전 방식에 의해 영향을 받으므로, 배터리 충전을 제어하는 전력제어유닛은 배터리 수명을 고려하여 설계되어야 한다. 배터리 충전은 낮 구간에서 태양전지로부터 생성된 전력을 전력제어유닛의 충전 전류 제어를 통해 이루어진다. 계절마다 다른 식 구간의 빈도를 고려하고 배터리 과충전 방지를 위하여 배터리 충전관련 변수들은 계절에 따라 각각 다르게 설계되어야 한다. 또한 충전 시 과전류 충전과 과전압 충전을 방지하기 위해 배터리 충/방전 상태, 충전전류 양, 배터리 전압, 배터리 용량, 배터리 온도, 배터리 셀 전압 등을 모니터링 하여 충전 전류를 제어한다. 인공위성에서는 각 조건을 반영하여 충전 전류를 제어하는 tapering 방식을 사용한다. 본 논문에서는 tapering 충전 방식을 적용한 인공위성 전력제어유닛의 배터리 충전 알고리즘을 설계한다. 설계된 알고리즘을 위성에 업로드 할 수 있는 코드로 변환하고 구축된 위성환경에서의 시험을 통해 동작을 검증한다.

다기능 인버터의 손실저감을 위한 Buck-Type 충전기법 (Buck-Type Charging Method for Loss Reduction of Multi-Function Inverter)

  • 김동희;우동균;이병국
    • 전기학회논문지
    • /
    • 제60권8호
    • /
    • pp.1523-1528
    • /
    • 2011
  • This paper proposes buck-type charging method using motor inductance, 3-phase inverter and bi-directional converter without an additional charger in plug-in hybrid electric vehicles. The proposed system has advantages over the conventional system such as high charging efficiency, high power factor, and low total harmonic distortion. The validity of each methods are verified by theoretical analysis and simulation.

모바일 감성 센싱 단말기의 무선 충전을 위한 프로토콜 설계 및 구현 (Design of the Protocol for Wireless Charging of Mobile Emotional Sensing Device)

  • 김선희;임용석;임승옥
    • 대한임베디드공학회논문지
    • /
    • 제7권2호
    • /
    • pp.95-101
    • /
    • 2012
  • In order to supply emotion service depending on user's emotional change in a mobile environment, various researches have been carried. This paper discusses a protocol for wireless charging and an embedded platform of the mobile emotional sensing device which supports that. Wireless charging process relieves user's vexatious task to charge the emotional sensing device. To support wireless charging, there are one basestation and several mobile devices. Basestation coordinates and controls the devices over wireless communication, as well as supplies energy. For 1:N communication we defines the network whose superframe is classified into four categories: a network join superframe, a charging request superframe, a charging superframe and an inactive superframe. Physical layer provides how to supply energy to the devices and communicate physically. Mobile device is equipped with energy charged circuits, which correspond with the defined energy supplying method, as well as bidirectional communication circuits. Mobile device monitors and analyzes its own battery status, and is able to send a request packet to basestation. Therefore, it can be charged before its battery is exhausted without user's perception.

최저대역보장형 서비스에 대한 과금 (Charging the Assured-Bandwidth Service)

  • 이훈;이광휘
    • 대한전자공학회논문지TC
    • /
    • 제41권3호
    • /
    • pp.179-179
    • /
    • 2004
  • 가까운 미래에 우리는 기존의 정액제 요금에서 종량제가 첨가되는 것과 같은 인터넷서비스의 요금체계에 변화를 맞이할 것이다. 본 논문은 이와 같은 움직임에 대비하여 차세대 네트워크에서 서비스품질이 보장되는 인터넷 서비스에 대한 사용량기반의 과금체계를 제안하고자 한다. 먼저, IP 네트워크에서 가장 주류를 이룰 Assured service에 의해서 발생되는 적응성이 있는 트래픽의 특성을 살펴보고, 이어서 네트워크 대역의 사용량에 기반한 과금방안을 제안한다. 그리고, 어떤 형태의 Assured service에도 적용 가능한 과금함수를 제안하고, 간단한 수치계산을 통하여 제안하는 방법의 유효성에 대하여 기술한다.

최저대역보장형 서비스에 대한 과금 (Charging the Assured-Bandwidth Service)

  • Seok, Seung-Hak;Lee, Hoon;Lee, Kwang-Hui
    • 대한전자공학회논문지TC
    • /
    • 제41권3호
    • /
    • pp.21-28
    • /
    • 2004
  • 가까운 미래에 우리는 기존의 정액제 요금에서 종량제가 첨가되는 것과 같은 인터넷서비스의 요금체계에 변화를 맞이할 것이다. 본 논문은 이와 같은 움직임에 대비하여 차세대 네트워크에서 서비스품질이 보장되는 인터넷 서비스에 대한 사용량기반의 과금체계를 제안하고자 한다. 먼저, IP 네트워크에서 가장 주류를 이룰 Assured service에 의해서 발생되는 적응성이 있는 트래픽의 특성을 살펴보고, 이어서 네트워크 대역의 사용량에 기반한 과금방안을 제안한다. 그리고, 어떤 형태의 Assured service에도 적용 가능한 과금함수를 제안하고, 간단한 수치계산을 통하여 제안하는 방법의 유효성에 대하여 기술한다.

배터리 충전을 위한 소형풍력 발전 시스템의 한계 풍속에 관한 연구 (A Study on the Cuf-off Speed of Small-scale Wind Power System for Battery Charging)

  • 구현근;이형욱;김장목
    • 전기학회논문지
    • /
    • 제63권4호
    • /
    • pp.484-489
    • /
    • 2014
  • Three phase PWM(Pulse Width Modulation) converter of the small-scale wind power system is able to charge battery under the rated wind speed regions. However, it is impossible to control output power of converter at the over win speed region because back-EMF(Electro Motive Force) of PMSG(Permanent Magnet Synchronous Generator) is higher than the battery terminal voltage of PMSG is reduced. However, the cut-off wind speed exists although battery charging algorithm is implemented by flux weakening control method. Therefore, this paper performs analysis of other factors which affects limitation wind speed. The validity of the analysis are verified through simulation.

Charging and Revenue Estimation for the WiMAX System

  • Lee, Hoon
    • 한국통신학회논문지
    • /
    • 제34권3B호
    • /
    • pp.288-303
    • /
    • 2009
  • In the near future it is foreseen that a genuine multimedia service over the WiMAX system is provided in a worldwide manner by exploiting the QoS technologies introduced in the wireless and wired broadband network. In this work we propose a pricing scheme for the multimedia service over the generic WiMAX system that supports a full QoS functionality. We assume real-time services such as the voice and video as well as the nonreal-time service such as the conventional high-speed data, and we propose a pricing and charging scheme for those services by investigating the inherent characteristics of those services and the multiple-class of QoS-service provided to them. After that we propose a method to compute expected revenue that is obtained from the WiMAX system by using an analytic method to estimate the usage of the bandwidth resources for the different class of services. Via numerical experiment, we verify the implication of the work.

플라이백 컨버터방법에 의한 태양광발전설비의 납축전지 스위칭모드 전환형 펄스충전기 개발 (Development of the Switching Mode Conversion Type Pulse Charger for the Lead Battery of Solar Cell Generator Equipment by Fly-Back Converter Method)

  • 신춘식;안영주;김동완
    • 전기학회논문지P
    • /
    • 제58권1호
    • /
    • pp.20-26
    • /
    • 2009
  • In this paper, the switching mode conversion type pulse charger by fly-back converter method for lead battery of the solar cell generator equipment is proposed. And we propose the control circuit and design method of insulated switching mode convert type pulse charger by fly-back convert method in the lead battery. The proposed system can minimize the current consumption by digital pulse. Also the proposed system can generate the constant 10[KHz] frequency, transmit the signal with main control system in the power control system. And it supervises the state of lead battery using one chip micro processor. The proposed the switching mode conversion type pulse charger by the fly-back converter method can charge fast and stabilize lead battery with nominal value 12[V], 20[AH]. Also we propose the design procedure of the power control circuit for turn ratio of fly-back inductor and determining method of values such as the charging current, bulk current, partial current, over current value and fixed charging voltage. The experiment results for the voltage and current wave for partial, bulk, over and fixed charging period show the good charging effect and performance. And the PCB and internal coupling diagram of the switching mode conversion type pulse charger by fly-back converter method is presented.