• Nuclear Engineering and Technology
• /
• 제32권1호
• /
• pp.17-33
• /
• 2000

A mechanistic model based on wall-attached bubble coalescence, previously developed by the authors, was extended to predict a vow high critical heat flux (CHF）in highly subcooled flow boiling, especially for high mass flux and small tube diameter conditions. In order to take into account the enhanced condensation due to high subcooling and high mass velocity in small diameter tubes, a mechanistic approach was adopted to evaluate the non-equilibrium flow quality and void fraction in the subcooled water flow boiling, with preserving the structure of the previous CHF model. Comparison of the model predictions against highly subcooled water CHF data showed relatively good agreement over a wide range of parameters. The significance of the proposed CHF model lies in its generality in applying over the entire subcooled flow boiling regime including the operating conditions of fission and fusion reactors.

• 설비공학논문집
• /
• 제13권11호
• /
• pp.1134-1140
• /
• 2001

In the present study, heat transfer characteristics of oil flow over offset strip fins were predicted by the numerical methods. Oil flow in the plate-fin passage was idealized by 2 dimension. Power law scheme and SIMPLE algorithm were used for convective diffusion formulation and pressure term respectively. Governing equations were discretized by control volume formulation. The flow patterns and heat transfer were predicted in details. The convective heat transfer coefficients were affected by separation bubbles which appeared at the wake region of offset strip fins.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.474-480
• /
• 2003

The wavelike flow mark phenomenon is one of the surface defects that can arise during the injection stage of the injection molding process. We have performed a numerical analysis using a finite element method for the injection molding to verify the validity of “Go-over” hypothesis. Also, we have compared the results of numerical analysis with available experimental data. Numerical analysis results of the flow marks are qualitatively in good agreement with experimental data of reference, but are quantitatively deviated from experimental data in a consistent manner. A parametric study has been performed to examine the correlative effects of various injection molding processing parameters and material properties on the flow mark size.

• 한국의류산업학회지
• /
• 제20권3호
• /
• pp.293-303
• /
• 2018

Since 2009, consumers could access a new shopping channel called 'mobile shopping' with the generalization of smartphones. Mobile shopping (based on wireless communication technology), emphasizes convenience differentiated from internet shopping. A recent report introduced fashion products as powerful global drivers for mobile shopping sales. Korea and China have the highest percentage of consumer mobile shopping experiences compared to other countries. This study investigates the effects of cross-over shopping orientation, perception of app attributes, and flow on app loyalty that compared Korean and Chinese consumers. We obtained 652 usable questionnaires from two local college students; subsequently, data were analyzed by using factor analysis, Cronbach's alpha, and regression analysis using SPSS 21.0 Package. The study results showed that the cross-over shopping orientation affected perception of app attributes that included Review/Information, Design, Response and Product. Product only affected Flow, which reflected a high similarity between Korean and Chinese consumers. However, Korean and Chinese consumers showed remarkable differences in the factors related to app loyalty. Therefore, the results indicate that retailers of fashion products have developed strategies to improve mobile sales and increase the app loyalty of cross-over shopping orientation consumers.

• 한국환경과학회지
• /
• 제2권3호
• /
• pp.161-177
• /
• 1993

The Yellow Sand Events observed over the Korean peninsula during 22-24 April, 1993 were examined using the synoptic data and GMS visible image to identify the transport path of the Yellow Sand and the main factor governing the duration of the Yellow Sand phenomenon. The 850 hPa convergence chart and the 700 hPa trajectory analyses of the air mass laden with Yellow Sand particles suggested that the Yellow Sand particles observed over Korea were probably transported from the Gobi Desert and the Loess Plateau. The duration of the Yellow Sand Events was about 35-40 hours rather shorter than normal as the high pressure system centered near the Mongolia region moved rapidly toward the Yellow Sea, which drove away the Yellow Sand particles over the Korean peninsula toward the Japan Islands, furthermore the low-level stratification of the air mass over the Korean penishula showed the unstable atmospheric condition leading to atmospheric diffusion of the particles. The trajectory analyses and the GMS visible image indicated that the long-range transport of the air mass laden with the Yellow Sand particles of this case was more dependent on the 700 hPa air flow than on the 850 hPa air flow.

• 한국해양환경ㆍ에너지학회지
• /
• 제9권2호
• /
• pp.79-84
• /
• 2006

본 연구는 자연지형에 존재하는 다양한 형태의 크고 작은 거칠기 요소들로 인해 기본 유동장이 변화하는 양상을 밝히기 위한 기초연구로서, 본 제1보와 이어지는 제2보로 나뉘어 소개될 것이다. 실험은 동일한 2차원 사각단면을 갖는 많은 양의 거칠기 요소를 평판위에 규칙적으로 배열한 후 거칠기 주위 유동장을 계측하였다. 회류수조에서 PIV 기법을 사용하여 2종류의 거칠기요소 높이와 3종류의 거칠기 사이 간격을 택하여 총 6경우에 대하여 거칠기 유동의 특성을 비교하였다. 실험결과 거칠기 간격이 거칠기 높이의 7배와 14배인 경우가 3.5배에 비하여 거칠기로 인한 유통장의 교란이 더 활발하고, 그에 따라 유동장에 미치는 영향도 큼을 확인할 수 있었다.

• 한국추진공학회지
• /
• 제20권1호
• /
• pp.1-7
• /
• 2016

공동 유동에 대한 연구는 유동이 균일하게 유입되는 수평면상에 설치된 공동에 대한 연구가 대부분이나, 곡면 벽상에 설치한 공동 유동에 관한 연구에 대해서는 거의 수행되지 않았다. 본 연구에서는 곡면 벽상에 설치한 공동 유동의 특성을 조사하기 위해 수치계산을 수행하였으며, 곡면의 형상, 곡면의 곡률 반경 그리고 유동의 마하수를 변화시켜 고아음속 유동에서의 공동 유동 특성을 조사하였다. 그 결과 공동 바닥의 압력은 L/R이 증가함에 따라 증가하였으며, 유동의 마하수가 높을수록 그 효과가 증가하였다. 공동 저항은 수평면 벽보다 곡면 벽에서 더 높은 값을 가졌다.

• Journal of Dental Anesthesia and Pain Medicine
• /
• 제18권2호
• /
• pp.105-110
• /
• 2018

Background: A stellate ganglion block (SGB) causes increased blood flow in the maxillofacial region, exhibiting the potential for regenerative effects in damaged tissue. The focus of this study was to understand the efficacy of SGB for regenerative effects against nerve damage. A rat model of the superior cervical ganglion block (SCGB) was created instead of SGB, and facial blood flow, as well as sympathetic nervous system function, were measured. Methods: A vertical incision was made on the left side of the neck of a Wistar rat, and a 5-mm resection of the superior cervical ganglion was performed at the back of the bifurcation of the internal and external branches of the left common carotid artery. Blood flow in the skin at the mandibular angle and mean facial temperature were measured using a laser-Doppler blood flow meter and a thermographic camera, respectively, over a 5-week period after the block. In addition, the degree of ptosis and miosis were assessed over a period of 6 months. Results: The SCGB rat showed significantly higher blood flow at the mandibular angle on the block side (P < 0.05) for 3 weeks, and significantly higher skin temperature (P < 0.05) for 1 week after the block. In the SCGB rat, ptosis and miosis occurred immediately after the block, and persisted even 6 months later. Conclusions: SCGB in rats can cause an increase in the blood flow that persists over 3 weeks.

• 한국환경복원기술학회지
• /
• 제13권4호
• /
• pp.52-64
• /
• 2010

This study was carried out to analyze the occurrence characteristics and the influence of forest environment factors on the debris flow of 3 national parks in korea. The results obtained from this study were summarized as follows; The total number of debris flow occurrence was 125 areas. The average length of the debris flow scar was 144m, average width was 20m. And the average area and sediment were $2,854m^2$ and $3,959m^3$ respectively. The factors influencing the debris flow were highly occurred in Metamorphic rock, mixed forest type. And also, slope gradient was $30{\sim}35^{\circ}$, aspect was NE, altitude was over 1,000m, vertical and cross slope was concave (凹), soil depth was below 15cm, stream order was 0 order. The variables of cross slope (complex), deciduous tree, soil depth (over 46cm), cross slope (concave), mixed forest type and altitude (801~1200m) in correlation analysis were significant at 1 % level. The landslide of high mountain area highly tend to change the debris flow in stream bed of torrent. The debris flow in national parks mainly occurred in high mountain area with long ridge and steep slope.

• 대한기계학회논문집B
• /
• 제21권2호
• /
• pp.285-293
• /
• 1997

Numerical calculations has been performed for the flow and heat transfer to a circular cylinder from a hot circular impinging air jet. The characteristics of the flow and heat transfer are investigated and compared with the two-dimensional flow. The present study lays emphasis on the investigation on the flow and heat transfer of the three-dimensionality. The effects of the buoyancy force and the size of jet are also studied. The noticeable difference between the three and the two-dimensional cases is that there is axial flow of low temperature into the center-plane of the cylinder from the outside in the recirculation region. Local Nusselt number over the cylinder surface has higher value for the large jet as compared with that of the small jet since the energy loss of hot jet to the ambient air decreases with increase of the jet size. As buoyancy force increases the flow accelerates so that the period of cooling by the ambient air is reduced, which results in higher local Nusselt number over the surface.