• Wind and Structures
• /
• 제30권3호
• /
• pp.245-260
• /
• 2020

Wind load and responses are the major factors which govern the design norms of tall buildings. Corner modification is one of the most commonly used minor shape modification measure which significantly reduces the wind load and responses. This study presents a comparison of wind load and pressure distribution on different corner modified (chamfered and rounded) Y plan shaped buildings. The numerical study is done by ANSYS CFX. Two turbulence models, k-epsilon and Shear Stress Transport (SST), are used in the simulation of the building and the data are compared with the previous experimental results in a similar flow condition. The variation of the flow patterns, distribution of pressure over the surfaces, force and moment coefficients are evaluated and the results are represented graphically to understand the extent of nonconformities due to corner modifications. Rounded corner shape is proving out to be more efficient in comparing to chamfered corner for wind load reduction. The maximum reduction in the maximum force and moment coefficient is about 21.1% and 19.2% for 50% rounded corner cut.

• 대한수학회논문집
• /
• 제30권2호
• /
• pp.65-72
• /
• 2015

The minimum rank mr(G) of a simple graph G is defined to be the smallest possible rank over all symmetric real matrices whose (i, j)-th entry (for $i{\neq}j$) is nonzero whenever {i, j} is an edge in G and is zero otherwise. The corona $C_n{\circ}K_t$ is obtained by joining all the vertices of the complete graph $K_t$ to each n vertex of the cycle $C_n$. For any t, we obtain an upper bound of zero forcing number of $L(C_n{\circ}K_t)$, the line graph of $C_n{\circ}K_t$, and get some bounds of $mr(L(C_n{\circ}K_t))$. Specially for t = 1, 2, we have calculated $mr(L(C_n{\circ}K_t))$ by the cut-vertex reduction method.

• 한국통신학회논문지
• /
• 제14권5호
• /
• pp.462-471
• /
• 1989

제안된 국부적응 2차원 변화율 메디안 필터는 변화율의 추정치에 의해 필터를 출력 방법을 결정하여 경계를 손상시키지 않고 잡음을 제거하는 효과를 가진 4가지의 알고리즘으로서 Subfilter Size를 변형하면 Corner를 복원할 수 있고 평균 Subfilter 대신 중앙연상르 취하면 완벽한 Cornoer 복원이 된다. 실 영상에 적용하여 알고리즘의 성능이 경계를 흐리지 않고 잡음의 영향을 감소하는 효과를 확인하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.55-56
• /
• 2006

This research was carried out to observe the structure and characteristics of SUBA pad for silicon wafer polishing. As the diamond size is smaller and shape is rounder, the pad cut rate becomes smaller. From the experimental results, we suggests that the diamond grade should be over 680 when the diamond mesh is between #100 and #170 for SUBA pad.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1784-1788
• /
• 2003

For the improvement of geometrical accuracy in end milling, cutting method and cutting condition selection are investigated in this paper. As machining processes are composed of several steps such as roughing, semi-finishing. and finishing, cutting forces and tool deflection are calculated considering surface shape generated by the previous cutting. The effects of tool teeth numbers, tool geometry, and cutting conditions on the form error are analyzed. Using the from error prediction method from tool deflection, cutting condition for geometrical accuracy improvement is discussed. The characteristics and the difference of generated surface shape in up and down milling are dealt with and over-cut free condition in up milling is presented. The form error reduction method by alternating up and down milling is also suggested. The effectiveness of the presented method is examined from a set of cutting tests under various cutting conditions. This research contributes to cutting process optimization for the geometrical accuracy improvement in die and mold manufacture.

• 한국연초학회지
• /
• 제16권2호
• /
• pp.113-121
• /
• 1994

The green peach aphid was relatively the majority(36.9-72.3% ) among all alate aphids collected from tobacco plants. Density of glatae was relatively lower on varieties Tl 1112 and Br 21 than on Va 115 or Y S A among seven varieties tested. However, no considerable difference was observed in general biology of nymphs produced by alatae on the tobacco varieties. About 55% of alate green peach aphid collected from tobacco fields produced progency, and over 80% of the nymphs became adults on cut tobacco leaves in petri dish. Adult longevity of both alate and apteral green peach aphid was shorter, and numbers of nymphs produced by both types were lower in summer than in autumn. Apterae produced more nymphs than alatae, but the longevity of apterae was shorter.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 추계학술대회 논문집 학회본부
• /
• pp.502-504
• /
• 1989

An electro-optic cutoff modulator with self-aligned electrode that utilizes a single-mode proton-diffused well-guided channel waveguide in a X-cut Y-propagating $LiNbO_3$ substrate is reported. The self-aligned electrode is formed during proton diffusion process of itself. Nearly linear voltage-intensity relationship has been observed. Over 90 % modulation has been achieved with applied voltage of 25 V.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전력기술부문
• /
• pp.34-37
• /
• 2001

This paper presents some results after comparing the characteristics of 3 algorithms, which are discrete Fourier transform based algorithm, least square method, and modified differential approximation algorithm, used at most distance relays all over the world. In case of the DFT based distance relaying algorithm, the length of the algorithm data window and the cut-off frequency of an anti-aliasing low-pass filter adopted are fixed. On the other hand, the data window lengths are changed according to the corresponding low-pass filters in the rest two algorithms. In series of tests, the apparent impedance estimated by the modified differential approximation algorithm shows faster and more stable characteristics of convergence than the two others.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1993년도 춘계학술대회 논문집
• /
• pp.113-116
• /
• 1993

A guided - wave electro - optical modulatored directional coupler $2{\times}2$ was fabricated on X-cut $LiNbO_3$ by proton exchange wi th self-aligned method. The Electode pattern was formed by the four extra gap electrode separtion within self-aligned electrode mask. Initial cross over state turned that by controlling the anneal ing process and self-aligned electrodes are used in fabricating the electro-optical modulatored directional coupler $2{\times}2$. The modulatored directional coupler $2{\times}2$ has very good figures of merits: the measured crosstalk was -28.2 dB and the modulating valtage of 3.2[V].

• Journal of Genetic Medicine
• /
• 제10권1호
• /
• pp.52-56
• /
• 2013

Mosaic trisomy 14 syndrome is a well-known but unusual chromosomal abnormality with a distinct and recognizable phenotype. Array comparative genomic hybridization (CGH) analysis has recently become a widely used method for detecting DNA copy number changes, in place of traditional karyotype analysis. However, the array CGH shows a limitation for detecting the low-level mosaicism. Here, we report the detailed clinical and cytogenetic findings of patient with low-frequency mosaic trisomy 14, initially considered normal based on usual cut-off levels of array CGH, but confirmed by G-banding karyotyping. Our patient had global developmental delay, short stature, congenital heart disease, craniofacial dysmorphic features, and dark skin patches over her whole body. Estimated mosaicism proportion was 23.3% by G-banding karyotyping and 18.0% by array CGH.