• 제목/요약/키워드: Outward-Flow

검색결과 80건 처리시간 0.019초

아말감과 복합레진의 수복 과정과 수복 후 발생하는 상아세관액 흐름의 실시간 측정 (REAL-TIME MEASUREMENT OF DENTINAL TUBULAR FLUID FLOW DURING AND AFTER AMALGAM AND COMPOSITE RESTORATIONS)

  • 김선영;조병훈;백승호;임범순;이인복
    • Restorative Dentistry and Endodontics
    • /
    • 제34권6호
    • /
    • pp.467-476
    • /
    • 2009
  • 본 연구의 목적은 아말감과 복합레진의 수복 과정과 수복 후 상아세관액의 흐름(dentinal fluid flow, DFF)을 측정하기 위함이다. 치근을 절제한 제 3 대구치를 자체 제작한 미세 유체 흐름 측정장치에 연결한 후 1급 와동을 형성하여 아말감과 복합레진 수복을 시행하였다. DFF의 측정은 와동 형성부터 수복 후 30분까지 연속적으로 이루어졌고, 수복 후 3, 7일에 재 측정하였다. 주수 하에 와동 형성 시 DFF는 inward로, 끝난 후에는 outward로 바뀌었다. 아말감 충전 시 DFF는 inward로 바뀌었고 충전 완료 후 미약한 outward DFF를 보였다. 복합레진 수복의 경우, 산 처리 후 수세와 건조 시 각각 inward와 outward DFF를 보였고 primer도포 후 공기 분사는 급격한 outward, 소수성 본딩제를 적용하는 단계에서는 outward 였던 DFF가 감소하여 0에 가까워지거나 약간 inward 흐름을 보였다. 접착제와 복합레진의 광중합은 급격한 inward의 DFF를 일으켰다. 수복 후 30분, 3일, 7일째 수복 재료에 따른 DFF의 감소에 통계적으로 유의한 차이는 없었다 (p>0.05).

단일 경사열선을 이용한 원형노즐의 유동해석 (Analysis of the Flow of a Circular Nozzle using a slant Hot-Wire)

  • 정의준;오상한
    • 한국유체기계학회 논문집
    • /
    • 제12권2호
    • /
    • pp.17-23
    • /
    • 2009
  • The program using $C/C^{++}$ which could calculate 3-D velocities from data of the flowfield obtained by a slant hot-wire has been developed. The characteristic of the exit flowfield of a circular nozzle with a curved surface was investigated. From the result, the inward-flow was verified at adjacent layers near the boundary of the exit flowfield of a circular nozzle in Id and outward-flow was sensed gradually from down-flow of Id. Similarity of the nondimensional velocity profile properlly could be obtained except near Id and the virtual origin reasonably could be obtained.

PIV를 이용한 극저비속도 세미오픈임펠러의 내부유동 계측 (Internal Flow Measurement of Very Low Specific Speed Semi-Open Impeller by PIV)

  • 니시노코이치;이영호;최영도
    • 대한기계학회논문집B
    • /
    • 제29권7호
    • /
    • pp.773-783
    • /
    • 2005
  • Internal flow measurement of very low specific-speed semi-open impellers has been carried out by PIV in order to understand better the internal flow patterns that are responsible fur the unique performance of these centrifugal pumps operating in the range of very low specific speed. Two types of impellers, one equipped with six radial blades (Impeller A) and the other with four conventional backward-swept blades (Impeller B), are tested in a centrifugal pump operating at a non-dimensional specific-speed of $n_s=0.24$. Complex flow patterns captured by PIV are discussed in conjunction with the overall pump performance measured separately. It is revealed that Impeller A achieves higher effective head than Impeller B even though the flow patterns in Impeller A are more complex, exhibiting secondary flows and reverse flows in the impeller passage. It is shown that both the localized strong outward flow at the pressure side of each blade outlet and the strong outward through-flow along the suction side of each blade are responsible for the better head performance of Impeller A.

THREE-DIMENSIONAL CRYSTALLIZING ${\pi}-BONDINGS,\;{\pi}-FAR$ INFRARED RAYS AND N-MACHINE

  • Oh, Hung-Kuk
    • 한국에너지공학회:학술대회논문집
    • /
    • 한국에너지공학회 1996년도 추계학술발표회 논문집
    • /
    • pp.34-44
    • /
    • 1996
  • N-machine produces more than input energy at above 3000 rpm. any space energy is absorbed when the N-machine is rotating at a very high velocity. Laws of electromagnetics verify that normal conduction is due to that electrons moves from one three-dimensional crystallizing ${\pi}-bonding$ orbital to next. The ${\pi}-far$ infrared rays are generated from the resonance and rotation of the electrons on the orbitals of three-dimensional crystallizing ${\pi}-bonding$ atoms. Material in universe is composed of ${\pi}-rays$, which have alternative outward electric field. If the alternative outward electric fields of the ${\pi}-rays$ are resonant each other they make attraction force, which is the gravity. The collection of space energy is due to a attraction force between the radially alternating electric field and the ${\pi}-far$ infrared rays in the space. Electrons flow by absorbed density difference of ${\pi}-far$ infrared rays along a conduction wire, which also verifies that normal electron conduction is due to a flow from one three-dimensional crystallizing ${\pi}-bonding$ orbital to next.

  • PDF

Effect of Marangoni flow on Surface Roughness and Packing Density of Inkjet-printed Alumina Film by Modulating Ink Solvent Composition

  • Jang, Hun-Woo;Kim, Ji-Hoon;Kim, Hyo-Tae;Yoon, Young-Joon;Kim, Jong-Hee;Hwang, Hae-Jin
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2009년도 추계학술대회 논문집
    • /
    • pp.99-99
    • /
    • 2009
  • Two different micro-flows during the evaporation of ink droplets were achieved by engineering both surface tension gradient and compositional gradient across the ink droplet: (1) Coffee-ring generating flow resulting from the outward flow inside the ink droplet & (2) Marangoni flow leading to the circulation flow inside the ink droplet. The surface tension gradient and the compositional gradient in the ink droplets were tailored by mixing two different solvents with difference surface tension and boiling point. In order to create the coffee-ring generating flow (outward flow), a single-solvent system using N,N-dimethylformamide with nano-sized spherical alumina particles was formulated, Marangoni flow (circulation flow) was created in the ink droplets by combining N,N-dimethylformamide and fotmamide with the spherical alumina powders as a co-solvent ink system. We have investigated the effect of these two different flows on the formation of ceramic films by inkjet printing method, The packing density of the ceramic films printed with two different ink systems (single- and co-solvent systems) and their surface roughness were characterized. The dielectric properties of these inkjet-printed ceramic films such as dielectric constant and dissipation factor were also studied in order to evaluate the feasibility of their application to the electronic ceramic package substrate.

  • PDF

『영추(靈樞)·본신(本神)』의 칠정상오장(七情傷五藏)에 대한 고찰(考察) (The Observation on the Five Vicera's Damaged due to Seven Emotion in the 『Lingshu·Benshen』)

  • 방정균
    • 한국의사학회지
    • /
    • 제18권2호
    • /
    • pp.55-62
    • /
    • 2005
  • In "Lingshu Benshen". five vicera are damaged due to changes in emotion having qi flow opposite to five viscera. As a result, it suggests that mental and physical illness could develop. The content of this piece can be explained in relation to five elements but uniformly through qi's flow. The contents can be summarized as follows. 1. The Heart is fire among the five elements and mainly characterized with dispersing. The flow of its qi is characterized facing upward and outward. On the other hand, being afraid or thinking seriously is characterized by making qi to go downward and stop so that the flow of qi is mainly facing toward inward and downward, damaging the heart. 2. The spleen has the conveyance function and spreads qi. On the other hand, worry and emotion inhibit qi function, blocking qi, damaging the spleen. 3. The liver has dispelling and removing functions and the power of sending up. The qi flow goes toward upward and outward. On the other hand, sadness stagnates qi, preventing the flow of liver's qi, damaging the liver. As a result, work is not done accurately. Madness develops with heat accumulated with qi stagnation. When qi is not sending up, mentality is not clear, leading to forgetfulness. 4. The lung has astringent and sending down functions, lowering qi. On the other hand, happy and joyful emotions bring up qi, showing the opposite flow of qi compared with the lung, damaging the lung. 5. The kidney has closing and storing functions, making qi flow to downward and inward. On the other hand, being angry makes qi to go up. Excessive expression of anger damages the kidney. As a result, the yin function of kidney does not work properly, leading to forgetfulness.

  • PDF

전향 스윕 프로펠러 홴의 성능 및 유동특성 (Performance and Flow Characteristics of a Forward Swept Propeller Fan)

  • 김진권;강신형
    • 대한기계학회논문집B
    • /
    • 제24권1호
    • /
    • pp.75-84
    • /
    • 2000
  • Performance and flow characteristics of a small forward swept propeller fan for home refrigerators are studied experimentally. An unusual discontinuity is observed in the performance curve of the fan. Mean flow fields measured with as-hole Pitot probe reveal that the flow is axial at the high flow rate and radial at the low flow rate. The flow structure changes abruptly across the discontinuity. Unsteady flow measurements with a set of hot-wire probes indicate that near the discontinuity a single-cell stall rotates at 40% speed of the fan speed, while away from the discontinuity the flow shows periodic variation corresponding to the blade passage frequency. Phase-lock averaged flow fields measured with a triple-sensor hot-wire probe show that there appears radially inward flow over the pressure side of the blade and the outward passage flow over the tip.

외부유동에 의한 캐버티 내의 비정상 유동특성 (Unsteady Flow in a Cavity Induced by An Oscillatory External Flow)

  • 서용권;박준관;문종춘
    • 한국해양공학회지
    • /
    • 제10권3호
    • /
    • pp.105-116
    • /
    • 1996
  • In this paper, we report the experimental results for the flow pattern and the material transport around a cavity subject to a sinusoidal external flow at the far region to ward the open side of the cavity. A tilting mechanism is used to generate a oscillatory flow inside a shallow rectangular container having a cavity at one side. The surface flow visualization is performed to obtain the unsteady behavior of vortices generated at two edges situated at the entrance of the cavity. It was found that at the period 4.5 sec., the behavior of the vortices is asymmetric, and there exists a steady residual flow in the cavity. The bottom flow patterns are also visualized. There are two regions outside of the cavity where the bottom fluid particles concentrate. The material transport in this flow model is very peculiar; fluid particles in the cavity flows outward through the passage along the walls starting from the edges, and particles in the outer region approach the cavity from the central region.

  • PDF

Model Parametrization on the Mixing Behavior of Coastal Discharges

  • Kim, Jong-Kyu
    • International Journal of Ocean Engineering and Technology Speciallssue:Selected Papers
    • /
    • 제6권1호
    • /
    • pp.15-21
    • /
    • 2003
  • A common feature in the three-dimensional numerical model experiments of coastal discharge with simplified model and idealized external forcings is investigated. The velocity fields due to the buoyancy and flaw flux, are spreaded radiately and the surface velocites are much greater than the homegeneous discharges. The coastal dischargd due to the Coriolis force and flaw flux are shaped a anticyclical gyre (clockwise) and determined the scale of the gyre in the coastal zone, respectively. The bottom topography restricts a outward extention of the coastal fronts and it accelerates a southward flow.

  • PDF

사상의학에서 각 체질별 기운의 방향 특성 (Directional Properties of 4 Type Constitution in Sasang Constitutional Medicine)

  • 김광현
    • 사상체질의학회지
    • /
    • 제21권1호
    • /
    • pp.53-62
    • /
    • 2009
  • 1. Objectives The purpose of this study is to find the ground why constitution must be classified into 4 types. 2. Methods I analysed the basic presuppositions to class 4 Type Constitution in Sasang Constitutional Medicine(SCM). And I connected the presuppositions with other theories from the viewpoint of directional properties of human body. 3. Results and Conclusions The most important presupposition to class 4 Type Constitution and apply to clinical therapy in SCM is that there is native strength and weakness of lung's Exhale Dispersing Qi, liver's Inhale Gathering Qi, spleen's Ascending Yin Qi and kidney's Descending Yang Qi. If there is superior tendency of Qi flow direction in human body, 6 directions(upward, downward, forward, backward, outward and inward) will be remarkable. But, in embryonic period, the outer skin is originated from the back(ectoderm) and the alimentary canal is from the front(endoderm). Therefore 4 directions(upward, downward, outward and inward) will be more remarkable, and those directions are included in the former presupposition.

  • PDF