• 품질경영학회지
• /
• 제33권3호
• /
• pp.126-134
• /
• 2005

This paper proposes a selectively cumulative sum(S-CUSUM) control chart for detecting shifts in the process mean. The basic idea of the S-CUSUM chart is to accumulate previous samples selectively in order to increase the sensitivity. The S-CUSUM chart employs a threshold limit to determine whether to accumulate previous samples or not. Consecutive samples with control statistics out of the threshold limit are to be accumulated to calculate a standardized control statistic. If the control statistic falls within the threshold limit, only the next sample is to be used. During the whole sampling process, the S-CUSUM chart produces an 'out-of-control' signal either when any control statistic falls outside the control limit or when L -consecutive control statistics fall outside the threshold limit. The number L is a decision variable and is called a 'control length'. A Markov chain approach is employed to describe the S-CUSUM sampling process. Formulae for the steady state probabilities and the Average Run Length(ARL) during an in-control state are derived in closed forms. Some properties useful for designing statistical parameters are also derived and a statistical design procedure for the S-CUSUM chart is proposed. Comparative studies show that the proposed S-CUSUM chart is uniformly superior to the CUSUM chart or the Exponentially Weighted Moving Average(EWMA) chart with respect to the ARL performance.

• 한국주거학회논문집
• /
• 제8권3호
• /
• pp.81-90
• /
• 1997

Cheju province exposes a separated residential culture compared to the mainland area. since it has its own unique climate, natural features. Therefore, this study tried to grasp the residential behavior. was based on the questionnaire to Cheju province people, using the approach by statistic verification. This study also focused and aimed on suggesting the basic data about housing plan which is appropriate to the climate. natural features requirement from inhabitants through the comparison and analysis between the mainland area and Cheju province. The results of the study are as follows; Firstly. the diversified applicative study on ‘Ol-rae’. ‘Ma-dang’, ‘Yoo-young’ and so forth that is traditional outside garden of Cheju is imperative, because in urban area people think traffics, vicinity, etc. are more significant, and in rural area people think occupying large outside space is more significant. Secondly. in the study of the degree of satisfaction on the housing, most of the people's was ‘neutral’ and in rural area quite a lot of negative reaction exposed. This is owing to the uniform introduction on residential style of the mainland area. Thirdly, housing plan should be considered family members' housing needs and provincial characteristics, meanwhile most of the people answered positively about the residential value which is considered very significant lately, for instance, security of privacy. appropriate plan for child's room.

• STI Policy Review
• /
• 제5권2호
• /
• pp.20-42
• /
• 2014

The Brazil, Russia, India China and South Africa (BRICS) group has emerged as a collection of large economies which are outside the traditional groups of industrialised "first world" economies and which have altered the global distribution of economic power. The basis of their emergence is a combination of their size and growth rates, and the fact that they lie outside the established centres of global economic power. As such, they have "diversified" the power base of the global economic order. The question which is asked in this paper is whether the phenomenon of the BRICS goes beyond this to mark the start of a possible challenge to the neoliberal orthodoxy which emerged as the globally dominant policy paradigm since the collapse of the Soviet Union. This paper develops and uses a "modes of innovation" approach to explore the potential of the BRICS to constitute a structural rupture in the current globally dominant neoliberal mode of innovation. This question is important since, in the absence of this rupture, the remarkable development trajectory of the BRICS will serve to reinforce the legitimacy of the global orthodoxy. The paper first articulates the modes of innovation concept and then proceeds to locate the BRICS systems of innovation within the current globally dominant mode. On this basis it then provides an appraisal of the possible impact of the BRICS on the evolutionary path of the global system of innovation.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2009년도 추계학술대회
• /
• pp.241-244
• /
• 2009

In this paper, it was performed to grasp the latest tendency of remanufacturing industry of domestic electronic components for development of remanufacturing technology and economical support of government. The merits of remanufacturing are to reuse old products to perform like a new product and to save energy, natural resources, landfill space and to reduce air pollution by less re-smelting. This paper proposes a systemic approach for activating the domestic remanufacturing industry. The approach is based on inside and outside regulations to apply remanufacturing companies. And, we analyzed the state and problems of remanufacturing industry for electronic components.

• Journal of Astronomy and Space Sciences
• /
• 제39권3호
• /
• pp.99-108
• /
• 2022

There are two models that explain the rotation curves of galaxies: dark matter, which gives the missing contribution to the gravitational potential of the standard theory of gravity, and modified theories of gravity, according to which the gravitational potential is created by ordinary visible mass. Both models have some disadvantages. The article offers a new look at the problem of galactic rotation curves. The author suggests that the moment of inertia creates an additional gravitational potential along with the mass. The numerical simulation carried out on the example of fourteen galaxies confirms the validity of such an assumption. This approach makes it possible to explain the constancy of gas velocities outside the galactic disk without involving the hypothesis of the existence of dark matter. At the same time, the proposed approach lacks the disadvantages of modified theories of gravity, where the gravitational potential is created only by the mass of visible matter.

• 대한토목학회논문집
• /
• 제32권3A호
• /
• pp.189-196
• /
• 2012

본 연구에서는 철근콘크리트 기둥의 심부구속 철근 이외에 추가적인 외측 횡 보강재료를 보강한 실험체에 대해 반복주기가력 실험을 수행하였다. 이 목적을 위해 스테인레스 강과 GFRP를 사용하여 외측 횡보강재료를 제작하였고, 실험의 주요 변수로 외측 횡보강재의 종류, 두께 및 보강간격을 선택하였다. 실험결과, 외측 횡보강된 실험체는 무보강 실험체에 비해 연성능력 및 에너지 소산능력의 향상을 확인하였고, 본 연구를 통하여 제안된 외측 횡보강재를 사용한 횡구속 방법은 철근콘크리트 기둥부재의 내진보강에 유용하게 사용할 수 있을 것으로 판단된다.

• Safety and Health at Work
• /
• 제10권3호
• /
• pp.305-313
• /
• 2019

Background: The oil and gas industry is one of the riskiest industries for confined space injuries. This study aimed to understand an overall picture of the causal factors of confined space accidents through analyzing accident reports and the use of a qualitative approach. Methods: Twenty-one fatal occupational accidents were analyzed according to the Human Factors Analysis and Classification System approach. Furthermore, thirty-three semistructured interviews were conducted with employees in different roles to capture their experiences regarding the contributory factors. The content analyses of the interview transcripts were conducted using MAXQDA software. Results: Based on accident reports, the largest proportions of causal factors (77%) were attributed to the organizational and supervisory levels, with the predominant influence of the organizational process. We identified 25 contributory factors in confined space accidents that were causal factors outside of the original Human Factors Analysis and Classification System framework. Therefore, modifications were made to deal with factors outside the organization and newly explored causal factors at the organizational level. External Influences as the fifth level considered contributory factors beyond the organization including Laws, Regulations and Standards, Government Policies, Political Influences, and Economic Status categories. Moreover, Contracting/Contract Management and Emergency Management were two extra categories identified at the organizational level. Conclusions: Preventing confined space accidents requires addressing issues from the organizational to operator level and external influences beyond the organization. The recommended modifications provide a basis for accident investigation and risk analysis, which may be applicable across a broad range of industries and accident types.

• Journal of Mechanical Science and Technology
• /
• 제17권10호
• /
• pp.1450-1457
• /
• 2003

Structural integrity of either a passenger car or a light truck is one of the basic requirements for a full vehicle engineering and development program. The results of the vehicle product performance are measured in terms of durability, noise/vibration/harshness (NVH), crashworthiness and passenger safety. The level of performance of a vehicle directly affects the marketability, profitability and, most importantly, the future of the automobile manufacturer. In this study, we used the Virtual Proving Ground (VPG) approach for obtaining the dynamic stress or strain history and distribution. The VPG uses a nonlinear, dynamic, finite element code (LS-DYNA) which expands the application boundary outside classic linear, static assumptions. The VPG approach also uses realistic boundary conditions of tire/road surface interactions. To verify the predicted dynamic stress and fatigue critical region, a single bump run test, road load simulation, and field test have been performed. The prediction results were compared with experimental results, and the feasibility of the integrated life prediction methodology was verified.

• 한국해양공학회지
• /
• 제31권2호
• /
• pp.91-102
• /
• 2017

Recently, a new type of LNG membrane Tank called the "KC-1 membrane LNG Tank" was developed by KOGAS (Korean Gas Corporation). It is necessary to estimate the temperature distribution of the hull structure and insulation system for this new LNG tank, as well as the BOR (Boil-Off Rate) when exposed to outside temperature conditions to ensure the integrity of the tank structure and limit LNG evaporation, from a safety evaluation point of view. In this study, temperature distribution calculations for the hull structure and insulation system of the KC1 membrane tank were compared by employing four numerical approaches under the IGC condition. Approaches 1-3 studied 2D simulations and approach 4 used a 3D numerical simulation. Approach 1 was calculated by in-house Excel VBA codes and the three other approaches utilized ANSYS Fluent. The BOR of approach 4, the 3D simulation case, for the IGC condition was 0.0986%/day.

• 대한교통학회지
• /
• 제26권6호
• /
• pp.113-122
• /
• 2008

본 연구에서는 위계구조 대중교통 노선망의 효율성을 이론적으로 해석한 박준식 외(2007c)의 연구를 연장하여 실제 자료를 적용한 결과를 도출하고 이의 실제 적용성을 검토하였다. 가상의 운영비용계수를 추정하는 모형을 구축하여 운영비용 계수를 추정하였으며, 이를 활용하여 도시철도 도입을 위해 요구되는 최소 통행수요를 도출하였다. 본 연구에서 산출한 최소 통행수요는 하나의 계산 예에 불과하며 모형 내/외부의 여러 가지 요소에 따라 가변적이다. 모형 내부의 경우 운영비용 계수와 도시철도의 통행속도가 주요 변화요소인데, 운영비용계수가 작고 통행속도가 빠른 경량전철의 경우 도시철도의 도입 가능성이 보다 높은 것으로 검토되었다. 모형 외부의 경우 노선망의 구조와 수요분포, 대중교통의 수단분담율에 대해서 검토한 바, 본 연구에서 산출한 최소 통행수요 값이 이들 변화요소들에 따른 예상치들 중 최대값이 될 것으로 판단된다. 투자평가의 경우 본 연구의 모형에서보다 편익을 과다추정하고 비용을 과소추정하는 것으로 검토되었는데, 본 연구의 결과값이 현실적인 변화요소들에 따른 기대치들 중 최대값임을 감안하면 투자평가는 결국 현실적인 수준에서 적정하게 평가하고 있는 것으로 볼 수 있다. 본 연구는 해석적인 접근을 통해 도시철도 도입의 효율성을 분석하였기 때문에 많은 단점과 한계를 갖고 있다. 또한 투자평가와 같은 실용적인 분석에 있어서도 나름대로의 한계를 갖는 것을 확인하였다. 이론적인 해석과 실용적인 방법론을 비교 검토하여 보다 정확하고 합리적인 분석 틀을 마련하는데 본 연구가 바탕이 될 수 있을 것이다.