• Journal of Power Electronics
• /
• v.15 no.3
• /
• pp.652-659
• /
• 2015

This paper presents a new hybrid soft switching dc-dc converter with a low circulating current and high circuit efficiency. The proposed hybrid converter includes two sub-converters sharing two power switches. One is a three-level PWM converter and the other is a LLC converter. The LLC converter and the three-level converter share the lagging-leg switches and extend the zero-voltage switching (ZVS) range of the lagging-leg switches from nearly zero to full load since the LLC converter can be operated at f_sw (switching frequency) $\approx$ f_r (series resonant frequency). A passive snubber is used on the secondary side of the three-level converter to decrease the circulating current on the primary side, especially at high input voltage and full load conditions. Thus, the conduction losses due to the circulating current are reduced. The output sides of the two converters are connected in series. Energy can be transferred from the input voltage to the output load within the whole switching period. Finally, the effectiveness of the proposed converter is verified by experiments with a 1.44kW prototype circuit.

• Journal of Power Electronics
• /
• v.18 no.5
• /
• pp.1479-1488
• /
• 2018

Power packet (PP) distribution system distributes power to different loads that share the same distribution cable in a packetized form. When compared with conventional power systems, a PP distribution system (PPDS) can reduce standby power, eliminate Point-of-Load (PoL) power conversion, and intelligently control the load demand from the source side. Due to the absence of PoL conversion, when multiple power sources at different voltage levels and conditioning requirements jointly send power to various loads at different voltage ratings, the generated voltage has an irregular shape. A large filter at each of the load sides is required to reduce such a large voltage ripple. In this paper, a single-inductor, multiple-input-single-output converter structure based multiple-energy-source mixer is proposed. It combines PP generation, maximum power point tracking (MPPT) of renewable energy sources (RESs) and filtering at the source side. To demonstrate the possible renewable energy integration, a PV panel is used as a power source together with other constant voltage sources. The PV power is approximately tracked using the constant voltage method and it is used for each of the PP generations. The proposed PP distribution system is experimentally verified and it is shown that a conventional PI controller is sufficient for stable system operation.

• Journal of Korea Technology Innovation Society
• /
• v.1 no.1
• /
• pp.117-124
• /
• 1998

Corporations are pursuing maximum returns from their R&D investment. They are also interested in sound measures to quantify returns. In fact, they use various measures and criteria for measuring returns from the R&D investment. But the fundamental problem is that there is no generic and widely acceptable measures and criteria. To make things more complicated, measures are very powerful and influential to the people in the corporations. Herbert Simon already indicated that people do many things but people usually do their best for the only tasks which are measured. Many researchers, like Chester(1995), are interested in R&D productivity measures and risks because what the company measures really influence R&D people and output. This article present design concepts of the R&D project selection and evaluation system in POSCO(Pohang Iron & Steel Company). This is an output extract from the 6-month joint activities with POSRI(POSCO Research Institute) researchers and POSCO R&D personnel. Process changes, new organizations and new selection and evaluation criteria are developed to improve R&D performance and to enhance technology management of the POSCO. This article covers new selection and evaluation criteria only. We would like to share our experience about how we redesign the selection and evaluation of R&D projects. We also bring insights how we seamlessly integrate 4 different project selection and evaluation steps as a whole. We hope that this case will give you a clue to improve your R&D management.

• The Journal of Fisheries Business Administration
• /
• v.43 no.2
• /
• pp.51-66
• /
• 2012

The purpose of this study is to present a new business performance model suitable for marin repair business. For this propose we have used survey datas gathered on several input and output factors from Marine engin repair companies Yeong-Do Gu. Gathering these the survey results we estimated the efficiency of each company through DEA method. The results of the analysis can be summarized as follows ; First, the result of the analysis showed 7 out of 24 DMU are not efficient companies. On the other hand 17 of them are efficient as the efficient output analyzes showed. Second, by analysing the results we could see significant differences between group companies, Ltd with a private companies with share on average efficiency in utilization. Third, two of the private companies are more effective and 6others were selected revisit and interview on the analysis. As a result inefficient DMU compared to efficient DMU and showed that they invest more on manpower in the field of sales and professional managers and techicians. Also, lots of effort devoted in order to standardize production by building capacity and environment management to improve welfare of the workers.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2006.05a
• /
• pp.92-100
• /
• 2006

In many common control charting situations, the statistic to be charted can be viewed as the output of a linear filter applied to the sequence of process measurement data. In recent work that has generalized this concept, the charted statistic is the output of a general linear filter in impulse response form, and the filter is designed by selecting its impulse response coefficients in order to optimize its average run length performance. In this work, we restrict attention to the class of all second-order linear filters applied to the residuals of a time series model of the process data. We present an algorithm for optimizing the design of the second-order filter that is more computationally efficient and robust than the algorithm for optimizing the general linear filter. We demonstrate that the optimal second-order filter performs almost as well as the optimal general linear filter in many situations. Both methods share a number of interesting characteristics and are tuned to detect any distinct features of the process mean shift, as it manifests itself in the residuals.

• Journal of Power Electronics
• /
• v.11 no.4
• /
• pp.533-541
• /
• 2011

The redundant operation of a parallel AC to DC converter via a serial communication bus is presented. The proposed system consists of three isolated CUK power factor correction modules. The controller for each converter is a dsPIC30F6010 microcontroller while a RS485 communication bus and the clock signal are used for synchronizing the data communication. The control strategy of the redundant operation relies on the communication of information among each of the modules, which communicate via a RS485 serial bus. This information is received from the communication checks of the converter module connected to the system to share the load current. Performance evaluations were conducted through experimentation on a three-module parallel-connected prototype, with a 578W load and a -48V dc output voltage. The proposed system has achieved the following: the current sharing is quite good, both the transient response and the steady state. The converter modules can perform the current sharing immediately, when a fault is found in another converter module. In addition, the transient response occurs in the system, and the output voltages are at their minimum overshoot and undershoot. Finally, the proposed system has a relatively simple implementation for the redundant operation.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.2
• /
• pp.838-848
• /
• 2018

This paper proposes a single-phase buck-boost AC-AC converter. It consists of three legs with six switching units (each unit is composed of an active switch and a diode) and its input and output ports share a common ground. It can provide buck-boost voltage operation and immune from shoot-through problem. Since only two switching units are involved in the current paths, the conduction losses are low, which improves the system efficiency. The operation principle of the proposed circuit is firstly presented, and then, various operation conditions are introduced to achieve different output voltages with step-changed frequencies. Additionally, the parameters design and comparative analysis of the power losses are also given. Finally, experimental results verify the correctness of the proposed converter.

• Nuclear Engineering and Technology
• /
• v.41 no.4
• /
• pp.549-560
• /
• 2009

Over the last three decades, nuclear technology development has played a vital role in the socio-economic development of the Republic of Korea. This study, being the first of its kind, focuses on quantifying the actual economic contribution of nuclear technologies to economic development by evaluating the net benefit of the nuclear power with respect to the country's Gross Domestic Product (GDP). An input-output analysis was employed as a methodological approach to analyze inter-industrial economic activities by calculating the industrial value added as a means of the economic contribution during the period of 1980 to 2005. The industrial value added of nuclear technologies was estimated from the construction and operation of nuclear power (backward-linked industrial value added) and from the industrial activities attributed to the electricity generated by the nuclear power (forward-linked industrial value added). It was found that the total net contribution of nuclear technologies as a percentage share of GDP amounted to 2.38% in 2005.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.5
• /
• pp.82-91
• /
• 2014

The combined generator system by integrating several renewable energy sources can share the electrical infrastructure and therefore have the advantage of constructing not only the transmission system but also the power conversion system. Among the various combined renewable system, the wind power and wave power has a high possibility of future growth due to the economic feasibility in offshore environment. This kind of large-scale combined systems might be follow the determination by the transmission system operator's directions and control the output profile by focusing at PCC. However, both renewable energies are depend on the unpredictable environmental variation; it is needed to do the compensation devices. In this paper, the ESS compensation plan is proposed to do output determination of the combined generator system by paying attention to active power of utility grid with the analysis of the controllable elements of the wind and wave power generator. The improvement of the new application technique of the combined system is confirmed through using the PSCAD/EMTDC. The entire simulation process was designed by adopting the active power control according to the reference signal of TSO.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.3
• /
• pp.1140-1155
• /
• 2021

Up to now, many state-of-arts have been proposed for two-way relaying system with linear modulations. The performances of antenna selection (AS) at both transmit and relay nodes need to be investigated in some two-way relaying multiple-input multiple-output (TWRM) systems. In this paper, the goal is focused on the study of nonlinear modulations, i.e., continuous phase modulation (CPM) in TWRM systems. Firstly, the joint phase trellis are simplified by reversed Rimoldi processing so as to reduce the systems' complexity. Then the performances of joint transmit and receive antenna selection (JTRAS) with CPM modulations in two-way relaying MIMO systems are analyzed. More exactly, the pair wise probability (PEP) is used to evaluate the error performance based on the CPM signal matrix, which is calculated in terms of Laurent expression. Since the channels subject to two terminal nodes share common antennas at relay node R in multiple-access scheme, we revise the JTRAS algorithm and compare it to existing algorithm via simulation. Finally, the error performances for various schemes of antenna selection are simulated and compared to the analysis in this paper.