• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.211.1-211.1
• /
• 2012

The on-orbit test simulation for predicting the instrument directional responsivity was conducted by the Monte Carlo based integrated ray tracing (IRT) computation technique and analytic flux-to-signal conversion algorithms. For the on-orbit test simulation, the Sun model consists of the Lambertian scattering sphere and emitting spheroid rays, the Amon-Ra instrument is a two-channel including a broadband scanning radiometer (energy channel) and an imager with ${\pm}2^{\circ}$ FOV (visible channel). The solar radiation produced by the Sun model is directed to the instrument viewing port and traced through the dual channel optical train. The instrument model is rotated on its rotation axis and this gives a slow scan of the Sun model over the full field of view. The direction of the incident lights are fed with scanned images obtained from the visible channel instrument. The instrument responsivity was computed by the ratio of the incident radiation input to the instrument output. In the radiometric simulation, especially, measured BRDF of the 3D CPC was used for scattering effects on radiometry. With diamond turned 3D CPC inner surface, the anisotropic surface scattering model from the measured data was applied to ray tracing computation. The technical details of the on-orbit test simulation are presented together with field-of-view calibration plan.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.4
• /
• pp.109-119
• /
• 1999

Switched Reluctance Motor(SRM) have been expanding gradually their awlications in the variable speed drives due to their relatively low cost, simple and robust structure, controllability and high efficiency. In this paper neural network theory is used to detemrine fuzzy-neural network controller's membership ftmctions and fuzzy rules. In addition neural network emulator is used to emulate forward dynamics of SRM and to get error signal at fuzzy-neural controller output layer. Error signal is backpropagated through neural network emulator. The backpropagated error of emulator offers the path which reforms the fuzzy-neural network controller's mmbership ftmctions and fuzzy rules. 32bit Digital Signal Processor(TMS320C31) was used to achieve the high speed control and to realize the fuzzy-neural control algorithm. Simulation and experimental results show that in the case of load variation the proposed control rrethcd was superior to a conventional rrethod in the respect of speed response.sponse.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.27 no.3
• /
• pp.617-636
• /
• 2017

Many businesses have adopted the standard security management structure such as ISO27001 and K-ISMS for strengthening business's security management structure to protect their core information assets and have acquired partial output from such effort. However, many risk factors such as recent advances in Information Technology and evolution of intrusion methods have increased exponentially requiring the businesses to response even more quickly with better accuracy. For such purpose, a study of 'Real Time Security Management Structure for Business' based on security management process optimization, defining a set of security index for managing core security area and calculation of risk indices for precognition of intrusion risk area has been made. Also, a survey on opinions of an expert panel has been conducted. The effectiveness of studied structure was analyzed using AHP method as well. Using this study, security personnels of a company can improve efficiency of the preemptive responsive and quicker measure from the current security management structure.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.3
• /
• pp.317-323
• /
• 1998

A synchronization is important element not only wire communication but also wireless communication. Especially, In SS(Spread Spectrum) communication method used GPS(Global Positioning System) synchronization is more important. A synchronous oscillator(SO) is a network which synchronizes, tracks, filter, amplifies and divides (if necessary) in a single process. Without an input signal, the SO is a free-running oscillator, oscillating at a frequency $w_0$, but phase changes $180^{\circ}$ within tracking range of SO. Therefore CPSO was used for this problem. The coherent phase synchronous oscillator(CPSO) is created by adding two external loops to the SO and has a wider tracking bandwidth and a zero-offset phase response (coherent) while maintaining the SO properties of high signal-to-rejection and fast frequency acquisition times. Therefore phase between input signal and output signal is synchronized. In this paper, GPS data recovery circuit has applied CPSO using front reference characters and has certified an excellent data recovery capability.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.12
• /
• pp.2662-2670
• /
• 2009

The effect of the reflector type for the SAW filter on the characteristics of the slanted finger IDT filter have been studied by computer simulation. The IDT was evaporated by Aluminum-Copper alloy. The design condition was optimized by the phase shift of the SAWfilter for WCDMA. We have employed that the number of pairs of the input and output IDT are 50 pairs and the thickness are $5,000{\AA}$, and the width and the space of reflector are $3.6{\mu}m$ and $2.0{\mu}m$, respectively. Frequency response of the fabricated SFIT filter has the property that the center frequency is about 190MHz and bandwidth at the 3dB is probably 8.2MHz. And we could obtain that the return loss is less then 16dB, the ripple characteristics is probably 4dB and the triple transit echo is less then 18dB after when we have matched impedance.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.6
• /
• pp.812-819
• /
• 2012

Interference and jamming are becoming increasing concern to a radar system nowdays. AESA(Active Electronically Steered Array) antennas and adaptive beamforming(ABF), in which antenna beam patterns can be modified to reject the interference, offer a potential solution to overcome the problems encountered. In this paper, we've developed a planar active phased array radar system, in which ABF, target detection and tracking algorithm operate in real-time. For the high output power and the low noise figure of the antenna, we've designed the S-band TRMs based on GaN HEMT. For real-time processing, we've used wavelenth division multiplexing technique on fiber optic communication which enables rapid data communication between the antenna and the signal processor. Also, we've implemented the HW and SW architecture of Real-time Signal Processor(RSP) for adaptive beamforming that uses SMI(Sample Matrix Inversion) technique based on MVDR(Minimum Variance Distortionless Response). The performance of this radar system has been verified by near-field and far-field tests.

• Journal of KIISE:Computing Practices and Letters
• /
• v.13 no.4
• /
• pp.226-230
• /
• 2007

In the conventional desktop PC environment, keyboard and mouse are used to process the user input and monitor displays the visual information as an output device. In order to manipulate the digital information, we move the virtual cursor to select the desired graphical icon on the monitor The cursor represents the relative motion of the physical mouse on the desk. This desktop metaphor does not provide intuitive interface through human sensation. In this paper, we introduce a novel tangible interface which allows the user to interact with computers using a physical tool called "Smartpuck". SmartPuck system bridges the gap between analog perception and response in human being and digital information on the computer. The system consists of table display based on a PDP, SmartPuck equipped with rotational part and button for the user's intuitive and tactile input, and a sensing system to track the position of SmartPuck. Finally, we will show examples working with the system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.10
• /
• pp.5980-5987
• /
• 2014

As a response to exhaust gas regulations, the electronic control system was applied to the diesel engine. The injected fuel mass and injection timing are accurately controlled using it, and the fuel efficiency and the engine output are significantly increased. In addition, the noise and the vibration of vehicles are decreased. To maintain the optimal performance of an electronic control diesel engine, it is important to control the fuel injection pressure accurately using the fuel pressure regulator. When the fuel pressure regulator is not worked normally, the failure phenomena (starting failure, staring delay, accelerated failure, engine mismatch et al.) occurred because the fuel pressure is not stabilized and controlled accurately. In this study, the effects on a fuel pressure, return fuel mass flow, and engine rotating speed according to the control rate of fuel pressure regulator were investigated to analyze the performance variation under the failure conditions of a fuel pressure regulator. As a result, when the control rate of a fuel pressure regulator decreased by 4%~6% compared to that of the standard condition, the variation of engine rotating speed and return fuel flow were increased greatly, and the abnormal condition occurred. In addition, it is possible to diagnose the failure of a fuel pressure regulator by monitoring these conditions.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.4
• /
• pp.293-301
• /
• 2006

This paper proposes a control algorithm for STATic synchronous COMpensator(STATCOM), based on Space Vector Modulation(SVM) and Hysteresis Current Controller(HCC) techniques. STATCOM is used to reactive power compensation on a distribution network. The proposed algorithm utilizes the advantages of the fast dynamic response of the hysteresis current control and the reduced switching number of the SVM scheme. The controller determines a set of space vectors from a region detector and applies a space vector. A set of space vectors including the zero vector, to reduce the number of switching, is determined from output signals of two hysteresis comparators. The presented control system was tested with digital simulation in the Borland C++ program and demonstrate the advantage of the proposed hysteresis current controller.

• Journal of Korean Society of Rural Planning
• /
• v.26 no.3
• /
• pp.57-65
• /
• 2020

Agricultural research and development (R&D) investment has contributed not only to agriculture but also to the overall economic growth of the country. The recent arrival of the fourth industrial revolution has raised the need for agricultural R&D as a preparation. Agriculture R&D is directly related to the fourth industrial revolution in the agricultural and livestock sectors that utilize big data, robots, artificial intelligence and cloud. Meanwhile, subsidies or grants are considered the most widely used means of policy. Therefore, in light of the current situation in which Chinese agriculture values R&D investment, this study attempted to analyze the dynamic relationship between variables by establishing a model of agricultural environment subsidy representing the role of government, agricultural technology progress representing existing agricultural R&D investment, agricultural income representing agricultural development and total agricultural output. The analysis results showed that each variable's reaction to the rise in China's agricultural R&D investment has a positive effect on agricultural development, in line with the theory that the investment in science and technology in the agricultural sector has a positive effect. In addition, the response of each variable to China's rising agricultural environment subsidy is shown to have a positive relationship, which can also be said to be in line with the theory that the government's market-friendly intervention is beneficial to economic development.