• Journal of the Optical Society of Korea
• /
• v.20 no.4
• /
• pp.488-499
• /
• 2016

We present a design and optical simulation of a cost-effective hybrid daylighting/LED system composed of mixing sunlight and light-emitting diode (LED) illumination powered by renewable solar energy for indoor lighting. In this approach, the sunlight collected by the concentrator is split into visible and non-visible rays by a beam splitter. The proposed sunlight collector consists of a Fresnel lens array. The non-visible rays are absorbed by the solar photovoltaic devices to provide electrical power for the LEDs. The visible rays passing through the beam splitters are coupled to a stepped thickness waveguide (STW) by tilted mirrors and confined by total internal reflection (TIR). LEDs are integrated at the end of the STW to improve the lighting quality. LEDs’ light and sunlight are mixed in the waveguide and they are coupled into an optical fiber bundle for indoor illumination. An optical sensor and lighting control system are used to control the LED light flow to ensure that the total output flux for indoor lighting is a fixed value when the sunlight is inadequate. The daylighting capacity was modeled and simulated with a commercial ray tracing software (Lighttools^TM). Results show that the system can achieve 63.8% optical efficiency at geometrical concentration ratio of 630. A required accuracy of sun tracking system achieved more than ±0.5^o . Therefore, our results provide an important breakthrough for the commercialization of large scale optical fiber daylighting systems that are faced with challenges related to high costs.

• Journal of Power System Engineering
• /
• v.19 no.3
• /
• pp.16-21
• /
• 2015

Nitrous oxide($N_2O$) concentration in the atmosphere has been constantly increased by the human activities with industrial growth after the industrial revolution. One of factors to increase $N_2O$ concentration in the atmosphere is the $N_2O$ emission caused by the combustion of marine fuel. Especially, a sulfur component included in marine fuel oils is known as increasing the $N_2O$ formation in diesel combustion. Form this point of view, $N_2O$ emission from a ship is not negligible. On the other hand, Exhaust gas recirculation(EGR) that have thermal, chemical and dilution effect is effective method for reducing the NOx emission. In this study, an author investigated $N_2O$ reduction by using EGR on a direct injection diesel engine. The test engine was a 4-stroke diesel engine with maximum output of 12 kW at 2600rpm, and operating condition of the engine was a fixed load of 75%. The experimental oil was a blend-fuel that were adjusted with sulfur ratio of 3.5%, and EGR ratio of 0%, 10%, 20% and 30%. In conclusion, diesel fuel that contained 3.5% sulfur component increased $SO_2$ emission in exhaust gas, and increment of EGR ratio reduced NO emission. Moreover, $N_2O$ emission was decreased as over 50% at EGR ratio of 10% and reduced 100% at EGR ratio of 30% compared with $N_2O$ emission of 0% EGR ratio.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.3
• /
• pp.247-252
• /
• 2014

This paper presents a novel impact sensor which can be fabricated with smart paint made of grapheme. This smart nano paint can be easily installed on structures using a spray-on technique and that can make the sensor low cost and practical. The graphene effectively improves the piezoresistivity of the smart paint and that is available to achieve sensitive impact sensor with high gauge factor. The nano smart-paint can detect sufficient impact to cover the damaged energy range of the composite around 1~3J. The voltage outputs from the sprayed paints show fairly linear responses after signal processing. The impact makes deformation of the structure and it brings change of piezoresistivity of the paint and those converts into voltage output consequently by means of a simple signal processing system. The nano smart paint is lightweight and easily applied to the structural surface, and there is no stress concentration. The nano smart paint is expected to be a cost effective and sensitive multi-functional sensor for composites and other damage monitoring applications in the field of structural health monitoring.

• Journal of the Korean Society of Radiology
• /
• v.14 no.5
• /
• pp.695-703
• /
• 2020

The use of medical devices is increasing due to the development of medical technology. Among medical devices, it is often used in the human body for graft and treatment. Therefore, in medical institutions, various sterilization methods according to the type and material of medical devices are applied to prevent infection. Hydrophosphite (HA) materials are the most popular in bone grafts. We would like to present a sterilization method using Q-switch Nd:YAG laser with high output energy among non-ionizing radiation suitable for small medical devices. In this study, sterilization power was most ideally shown at UV wavelengths of 1.5 W, 266 nm, and 10 pulses. Different wavelength bands; infrared and visible light; showed passive sterilization, and ultraviolet A and C showed differences in sterilization according to the pulse. In laser sterilization were differences that found according to the wavelength bands and pulses.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.51 no.4
• /
• pp.583-591
• /
• 2015

The coastal stow net (stow net hereafter) in Korea is one of the major fishing methods for yellow croaker (Larimichthys polyactis), ribbon fish (Trichiurus lepturus), and anchovy (Engraulis japonicus). In terms of energy efficiency, the stow net fishery is more competitive than towing fishing gears such as trawl gears. The fishing vessels in stow net fishery have consumed less fossil fuel and also have had less carbon dioxide emission into the atmosphere. however, the stow net fishery is necessary to be regulated due to its increased output of the fleet. Therefore, it is required for fisheries authorities to manage the fishing capacity or fishing power for the assurance of fishery's sustainability. For fisheries management authorities, it is necessary to quantify data related to fishing capacity and fishing power to deploy fishery policy in a sustainable way. In terms of data for decision-making, Data envelopment analysis (DEA) method was conducted to estimate fishing capacity. Fishing power index (FPI) was also applied to calculate relative fishing power to approach the problem in a quantitative way.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.3
• /
• pp.13-19
• /
• 2016

The PSK (Pre-shared Secret Key) based method is appropriate for the IoT environment consisting of lightweight devices since this method requires less computing time and energy than the method to configure the session key based on the public key algorithm. A fundamental prerequisite for the PSK based method is that PSK should have been configured between the communication entities safely in advance. However, in case of a small sensor or actuator, no input and output interface such as keyboard and monitor required for configuration exists, so it is more difficult to configure PSK for such lightweight devices safely in the IoT environment than the previous Internet devices. Especially, normal users lack expertise in security so they face difficulty in configuration. Therefore, the default value configured at the time of manufacturing at factories is used or the device installer configures PSK in most cases. In such case, it is a matter for consideration whether all installers and manufacturers can be trusted or not. In order to solve such problem, this paper proposes a secure bootstrapping scheme, which utilizes the NFC (Near Field Communication) as an OOB (Out-Of-Band) channel, for lightweight devices with limited resources.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.12
• /
• pp.67-75
• /
• 1999

In this paper, we present an ASIC(Application Specific Integrated Circuit) design of wavelet transform filter Wavelet transform is used in lots of application fields which include image compression, because it has an excellent energy compaction. The operation characteristic and performance of wavelet transform filter are analyzed by using verilog-HDL(Hardware Description Language). In this paper, the designed wavelet transform filter uses line memory to improve data processing rate. Generally, when it reads and writes data of DRAM by using Fast Page Mode, input and output processing is very fast in horizontal direction but substantially slow in vertical direction. The use of line memory solves this low speed processing problem. As a result, though the size of the chip is getting larger, processing time for an image frame becomes 4.66ms. Generally, since the limit of 1 frame processing time on the data of TV video is 33ms, so it is appropriate for TV video.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.1075-1080
• /
• 2015

A hybrid electric vehicle (HEV) powertrain has more than one energy source including a high-voltage electric battery. However, for a high voltage electric battery, the average current is relatively low for a given power level. Introduced to increase the voltage of a HEV battery, a compact, high-efficiency boost converter, sometimes called a step-up converter, is a dc-dc converter with an output voltage greater than its input voltage. The inductor occupies more than 30% of the total converter volume making it difficult to get high power density. The inductor should have the characteristics of good thermal stability, low weight, low losses and low EMI. In this paper, Mega Flux^® was selected as the core material among potential core candidates. Different structured inductors with Mega Flux^® were fabricated to compare the performance between the conventional air cooled and proposed potting structure. The proposed inductor has reduced the weight by 75% from 8.8kg to 2.18kg and the power density was increased from 15.6W/cc to 56.4W/cc compared with conventional inductor. To optimize the performance of proposed inductor, the potting materials with various thermal conductivities were investigated. Silicone with alumina was chosen as potting materials due to the high thermo-stable properties. The proposed inductors used potting material with thermal conductivities of 0.7W/m·K, 1.0W/m·K and 1.6W/m·K to analyze the thermal performance. Simulations of the proposed inductor were fulfilled in terms of magnetic flux saturation, leakage flux and temperature rise. The temperature rise and power efficiency were measured with the 40kW boost converter. Experimental results show that the proposed inductor reached the temperature saturation of 107℃ in 20 minutes. On the other hand, the temperature of conventional inductor rose by 138℃ without saturation. And the effect of thermal conductivity was verified as the highest thermal conductivity of potting materials leads to the lowest temperature saturations.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.4
• /
• pp.430-435
• /
• 2018

In this paper, an improved decoding scheme for low-complexity parity-check(LCPC) code with small code length is proposed. The LCPC code is less complex than the turbo code or low density parity check(LDPC) code and requires less memory, making it suitable for communication between internet-of-things(IoT) devices. The IoT devices are required to have low complexity due to limited energy and have a low end-to-end delay time. In addition, since the packet length to be transmitted is small and the signal processing capability of the IoT terminal is small, the LCPC coding system should be as simple as possible. The LCPC code can correct all single errors and correct some of the two errors. In this paper, the proposed decoding scheme improves the bit error rate(BER) performance without increasing the complexity by correcting both errors using the soft value of the modulator output stage. As a result of the simulation using the proposed decoding scheme, the code gain of about 1.1 [dB] was obtained at the bit error rate of $10^{-5}$ compared with the existing decoding method.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.12
• /
• pp.1755-1762
• /
• 2014

The objective of this study was to investigate the effect of maize source and complex enzymes containing amylase, xylanase and protease on performance and nutrient utilization of broilers. The experiment was a $4{\times}3$ factorial design with diets containing four source maize samples (M1, M2, M3, and M4) and without or with two kinds of complex enzyme A (Axtra XAP) and B (Avizyme 1502). Nine hundred and sixty day old Arbor Acres broiler chicks were used in the trial (12 treatments with 8 replicate pens of 10 chicks). Birds fed M1 diet had better body weight gain (BWG) and lower feed/gain ratio compared with those fed M3 diet and M4 diet (p<0.05). Apparent ileal crude protein digestibility coefficient of M2 was higher than that of M3 (p<0.05). Apparent metabolisable energy (AME) and nitrogen corrected AME (AMEn) of M1 were significant higher than those of M4 (p<0.05). Supplementation of the basal diets with enzyme A or B improved the BWG by 8.6% (p<0.05) and 4.1% (p>0.05), respectively. The fresh feces output was significantly decreased by the addition of enzyme B (p<0.05). Maize source affects the nutrients digestibility and performance of broilers, and a combination of amylase, xylanase and protease is effective in improving the growth profiles of broilers fed maize-soybean-rapeseed-cotton mixed diets.