• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.04a
• /
• pp.556-557
• /
• 2014

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.472-475
• /
• 2008

Generally, a linear vibration theory regards a vibratory system as the superposition of many degrees of vibratory system. Modal analysis stems, in fact, considers the vibration system as what has input, output, and transfer function that relates the input and output. When we want to control, however, the vibratory system, we define, first, the object function that can be vibration energy of certain vibratory system. Then, we try to find the transfer function that can minimize the object function. We can readily extend this approach to control the distributed vibration system. For example, the vibrations of a vehicle, including ships and trains. In this case, we may want to minimize the vibration of the area we select. For example, minimize the vibration of the passengers' seat, but allowing the vibration of other area; for example engines and wheels. This paper introduces a general theory that can control the vibration of the selected area, which can be called as "regional control of vibration." In fact, this is the extended theory of well known sound control of "bright zone"(Choi and Kim, 2002).]. Several illustrative examples demonstrate the applicability and properties that are not available if we use modal analysis method.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.12
• /
• pp.108-114
• /
• 1995

Recently, along wtih the advance of high-performance system, synchronous DRAM's (SDRAM's) which provide consecutive data output synchronized with an external clock signal, have been reported. However, in the conventional SDRAM's which utilize a multi-stage serial pipelined scheme, the column path is divided into multi-stages depending on CAS latency N. Thus, as the operating speed and CAS latency increase, new stages must be added, thereby causing a large area penalty due to additinal latches and I/O lines. In the proposed register-based parallel pipelined scheme, (N-1) registers are located between the read data bus line pair and the data output buffer and the coming data are sequentially stored. Since the column data path is not divided and the read data is directly transmitted to the registers, the busrt read operation can easily be achieved at higher frequencies without a large area penalty and degradation of internal timing margin. Simulation results for 0.32um-Tech. 4-Bank 64M SDRAM show good operation at 200MHz and an area increment is less than 0.1% when CAS latency N is increased from 3 to 4.. This pipelined scheme is more advantageous as the operating frequency increases.

• Journal of Communications and Networks
• /
• v.13 no.2
• /
• pp.167-174
• /
• 2011

In this paper, we propose and simulate an efficient interference cancellation scheme with an optimal ordering successive interference cancellation (SIC) algorithm for ultra wideband (UWB)/multiple-input-multiple-output (MIMO) systems in a wireless body area network (WBAN). When there are several wireless communication devices on a human body, multiple access interference (MAI) usually occurs. To mitigate the effect of MAI and achieve additional diversity gain, we utilize SIC with an optimal ordering algorithm. A zero correlation duration (ZCD) code with robust MAI capability is employed as a spread code for UWB systems in a multi-device WBAN environment. The performance of the proposed scheme is evaluated in terms of the bit error rate (BER). Simulation results confirm that the BER performance can be improved significantly if the proposed interference cancellation scheme and the ZCD code are jointly employed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.722-725
• /
• 2004

Voltage step-down characteristics in Ring/Dot type piezoelectric transformer were examined as a function of the area of input electrode when the area of output electrode is fixed. The effects of driving frequency and load resistance on the voltage step-down characteristics were also examined. Voltage gain was greatly dependent on the driving frequency and load resistance, and showed a maximum gain at resonance frequency of the step-down transformer. The frequency where the maximum output voltage appears increased about 0.2% as the load resistance increased from 10 to $150\Omega$. As the area of input electrode increased, the voltage gain and the efficiency of the transformer increased. Frequency dependence of efficiency of the step-down transformer revealed a similar tendency with the voltage gain curves. The maximum efficiency remarked 94% when the input voltage and the load resistance were 20 $V_{PP}$ and $120\Omega$, respectively.

• Journal of Korean Society of Rural Planning
• /
• v.25 no.3
• /
• pp.1-9
• /
• 2019

Population is important as a fundamental element of local industry and economy, and census data is essential to regional planning and policy making. Although there have been many researches on population and regional planning, there are few studies on population considering spatial unit. In this study, the population of three spatial scales were compared in order to establish the spatial unit suitable for the rural planning. The study area is Gangwon, Chungcheong-Nam, Chungcheong-Buk, Jeolla-Nam, Jeolla-Buk, Gyeonsang-Nam, Gyeonsang-Buk and Jeju province. Population were compared using statistical data analysis, GIS visualization, and spatial statistics. The mean, maximum, minimum, and variance of population were calculated and the coefficient of variation according to spatial unit was compared. The mean, maximum, minimum, and variance of population were calculated and the coefficient of variation according to spatial unit was compared. As the results, the census output area unit is difficult to interpret spatial analysis results. Administrative district unit has the limit that includes areas where the population does not live. The grid unit is well suited to the geographical characteristics but has many disadvantages of the grid with small population. Therefore, It is necessary to complement the limits of the Eup and Myeon-dong administrative district through the grid unit data.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.9
• /
• pp.1755-1762
• /
• 2016

In this paper, a small areal dual-output SC(switched capacitor) DC-DC converter with a improved range of an input voltage is presented. The conventional SC DC-DC converter has an advantage of low cost and small chip area. But, it has a narrow input voltage range to convert efficiently. Also, it has a lager chip area and a lower power efficiency from multiple outputs. The proposed SC DC-DC converter improves the power efficiency by using the capacitor array structure which efficiently converts the voltage according to the input voltage. By sharing two switch array, it reduces the number of switches and capacitors from 32 to 25. The proposed SC DC-DC converter was manufactured in a $0.18{\mu}m$ CMOS process. In the simulation, the range of the input voltage is 0.7~ 1.8V, the max. power efficiency is 90%, and the chip area is $0.255mm^2$.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.1
• /
• pp.57-62
• /
• 2015

In this paper, we design fuzzy inference-based deterioration diagnosis system through different image for rapid as well as efficient diagnosis of electrical equipments. When the deterioration diagnosis of the electrical equipment starts, abnormal state of assigned area is detected by comparing with the temperature of the first normal state of the area. Deterioration state of detected area is diagnosed by using fuzzy inference algorithm. In the fuzzy inference algorithm, fuzzy rules are defined by If-then form and are described as look-up table. Both temperature and its ensuing variation are used as input variables. While triangular membership function is used for the fuzzy input variables of fuzzy rules, singleton membership function is used for the output variable of fuzzy rules. The final output is calculated by using the center of gravity of fuzzy inference method. Experimental data acquired from individual electrical equipments is used in order to evaluate the output performance of the proposed system.

• Korean Journal of Agricultural Science
• /
• v.37 no.3
• /
• pp.501-508
• /
• 2010

A swirl chamber type diesel engine attachable to 18 kW agricultural tractors was improved to reduce exhaust emissions. Compression ratio and throat area ratio of the combustion chamber were varied to determine optimum combustion conditions. Tests were composed of full load and 8-mode emission tests. Compression ratio was fixed as 21, but the swirl chamber volume was increased by 3.8%. Output power, torque, specific fuel consumption, exhaust gas temperature, and smoke level were not considerably different for compression ratios of 21.5 (reference condition) and 21 (test condition), while NOx, HC, CO and PM levels for the compression ratio of 21 were decreased by 11%, 46%, 28%, 11%, respectively, from those for the compression ratio of 21.5. The tests were also conducted with a compression ratio of 22 and 4.3% increased chamber volume. Output power, torque, exhaust gas temperature and smoke level were greater, while specific fuel consumption was less for the compression ratio of 22 than those for the compression ratio of 21.5. Increase of compression ratio decreased HC and CO levels by 24%, 39%, but increased NOx and PM levels by 24%, 39%. Based on these results, a compression ratio of 21 was selected as an optimum value. Then, full load tests with the selected compression ratio of 21 were carried out for different throat ratios of 1.0%, 1.1%, 1.2%. Output power and torque were greatest and smoke was lowest when throat area ratio was 1.1%, which satisfied the target values of specific fuel consumption (less than 272 g/$kW{\cdot}h$) and exhaust gas temperature (less than $550^{\circ}C$). Therefore, a throat area ratio of 1.1% was selected as an optimum value.

• Journal of the Korean association of regional geographers
• /
• v.6 no.3
• /
• pp.169-184
• /
• 2000

Industrial clusters and their boundaries are identified by factor and hot spot analyses for the greater Cincinnati metropolitan area in USA. While traditional input-output approach identified aspatial industrial clusters, this study combines traditional approach with GIS techniques to identify their boundaries. Combining the results of input-output industrial clusters with the leading industries groups, we have identified five leading industry clusters. They are food (20), chemicals (28), metal manufacturing (32), metal products (33), and machinery (35). We also used hot spot analysis to visualize each industry cluster on the research area by using Arcview software. Determining the degree to which such industries are associated spatially and their spatial delimitation may be an additional approach to measuring the efficiency of the spatial organization of an economy. It is hoped that the industrial clusters and industrial spatial clusters approaches may also proved the basis for the development of new models of the spatial arrangement of industry at a level more aggregated than that of the single plant or firm.