• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.10
• /
• pp.2409-2418
• /
• 2013

Two frequency synthesizers are proposed to generate a clock for a sub-sampler of an on-chip oscilloscope in this paper. These proposed frequency synthesizers are designed by using a multi-phase delayed-locked loop (DLL)-based phase selector and a fractional-N phase-locked loop (PLL), and they are analyzed by comparing simulation results of each frequency synthesizer. Two proposed frequency synthesizers are designed using a 65-nm CMOS process with a 1V supply and output the clock with the frequency of 121.15 MHz when the frequency of an input clock is 125 MHz. The designed frequency synthesizer using a multi-phase DLL-based phase selector has the area of 0.167 $mm^2$ and the peak-to-peak jitter performance of 2.88 ps when it consumes the power of 4.75 mW. The designed frequency synthesizer using a fractional-N PLL has the area of 0.662 $mm^2$ and the peak-to-peak jitter performance of 7.2 ps when it consumes the power of 1.16 mW.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.11
• /
• pp.1483-1503
• /
• 2011

To advance the effectiveness of the current Hanwoo improvement system, we developed a general simulation that compared a series of breeding schemes under realistic user circumstances. We call this system the Integrated General Model (IGM) and it allows users to control the breeding schemes and selection methods by manipulating the input parameters. The Current Hanwoo Performance and Progeny Test (CHPPT) scheme was simulated with a Modified Hanwoo Performance and Progeny Test (MHPPT) scheme using a Hanwoo Breeding Farm cow population of the Livestock Improvement Main Center (LOMC) of the National Agricultural Cooperatives Federation (NACF). To compare the two schemes, a new method, the Simple Hanwoo Performance Test (SHPT), which uses ultrasound technology for measuring the carcass traits of live animals, was developed. These three models, including the CHPPT, incorporated three types of selection criteria: phenotype (PH), true breeding value (TBV), and estimated breeding value (EBV). The simulation was scheduled to mimic an actual Hanwoo breeding program; thus, the simulation was run to include the years 1983-2020 for each breeding method and was replicated 10 times. The parameters for simulation were derived from the literature. Approximately 642,000 animals were simulated per replication for the CHPPT scheme; 129,000 animals were simulated for the MHPPT scheme and 112,000 animals for the SHPT scheme. Throughout the 38-year simulation, all estimated parameters of each simulated population, regardless of population size, showed results similar to the input parameters. The deviations between input and output values for the parameters in the large populations were statistically acceptable. In this study, we integrated three simulated models, including the CHPPT, in an attempt to achieve the greatest genetic gains within major economic traits including body weight at 12 months of age (BW12), body weight at 24 months of age (BW24), average daily gain from 6 to 12 months (ADG), carcass weight (CWT), carcass longissimus muscle area (CLMA), carcass marbling score (CMS), ultrasound scanned longissimus muscle area (ULMA), and ultrasound scanned marbling score (UMS).

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.4
• /
• pp.137-143
• /
• 2013

The high resolution satellite images are used in many fields such as weather observation, remote sensing, military facilities monitoring, cultural properties protection etc. Although satellite images are obtained in same satellite imaging system, the satellite images are degraded depending on the condition of hardware(optical device, satellite operation altitude, image sensor, etc.). Due to the fact that changing the hardware of satellite imaging system is impossible for resolution enhancement of these degraded satellite after launching a satellite, therefore the method of resolution enhancement with satellite images is necessary. In this paper the resolution is enhances by using a Super Resolution(SR) algorithm. The SR algorithm is an algorithm to enhance the resolution of an image by uniting many low resolution images, so an output image has higher resolution than using other interpolation methods. But It is difficult to obtain many images of the same area. Therefore, to solve this problem, we applied SR after by applying the affine and projection transform. As a results, we found that the images applied SR after affine and projection transform have higher resolution than the images only applied SR.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.2
• /
• pp.71-80
• /
• 1999

In this paper, a power MOSFET driver with protection circuits is designed using a 2${\mu}m$ high-voltage CMOS process. For stable operations of control circuits a power managing circuit is designed, and a voltage-detecting short-circuit protection(VDSCP) is proposed to protect a voltage regulator in the power control circuit. The proposed VDSCP scheme eliminates voltage drop caused by a series resistor, and turns off output current under short-circuit state. To protect a power MOSFET, a short-load protection, a gate-voltage limiter, and an over-voltage protection circuit are also designed A high voltage 2 ${\mu}m$ technology provides the breakdown voltage of 50 V. The driver consumes the power of 20 ~ 100 mW along its operation state excluding the power of the power MOSFET. The active area of the power MOSFET driver occupies $3.5 {\times}2..8mm^2$.

• Journal of Bio-Environment Control
• /
• v.4 no.2
• /
• pp.131-135
• /
• 1995

In winter, most of the energy for a greenhouse crop is supplied during the night. Since watermelon is grown under high night temperature, the experiments were set up to investigate night temperature influence on watermelon in order to obtain the best economic output. Day temperatures ranged from $25^{\circ}C$ and 3$0^{\circ}C$ ; night temperatures ranged from 2$0^{\circ}C$ to 3$0^{\circ}C$ at 5$^{\circ}C$ interval. Two cultivars of watermelon(Citrullus vulgaris S. ‘Binna’ and ‘Kamro’) treated with 30/3$0^{\circ}C$ yielded maximum leaf areas, flowers and leaf numbers. 30(14h)/25(10h)$^{\circ}C$ or 30(12h)/25(12h)$^{\circ}C$ grown plants had higher germination ratio and more dry weight and chlorophyll than those of 30/3$0^{\circ}C$ which were the highest temperature integral. Although 25/$25^{\circ}C$ and 30/2$0^{\circ}C$ regime are same average temperature, the growth of watermelons at 30/2$0^{\circ}C$ was significantly higher than 25/$25^{\circ}C$. ‘Binna’ was growing more than ‘Kamro’ at the same temperature. Leaf area ratio(LAR) was reduced with increasing DIF temperature from 30/3$0^{\circ}C$ to 30/2$0^{\circ}C$, but leaf weight ratio(LWR) was increased.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.2
• /
• pp.162-169
• /
• 2012

This study detected SCC defects of dissimilar metal welded(STS304 and SA106 Gr. b) pipes using the ultrasonic infrared thermography method and the lock-in image treatment method among infrared thermography method. The infrared excitement equipment has 250 Watt of output and 20 kHz of frequency. By using the ultrasound infrared thermography method, the internal defects of dissimilar metal weld joints of pipes used at nuclear power plants could get detected. By an actual PT test, it was observed that the cracks inside the pipe existed not as a single crack but rather as a multiple cracks within a certain area and generated a hot spot image of a broad area on the thermography image. In addition, UT technology could not easily defects detected by the width of $10\;{\mu}m$ fine hair cracks. but, ultrasound infrared thermography technique was defect detected.

• Archives of Plastic Surgery
• /
• v.45 no.5
• /
• pp.449-457
• /
• 2018

Background Although previous studies have focused on determining prognostic and causative variables associated with fistula-related complications after head and neck reconstructive surgery, only a few studies have addressed preventive measures. Noting that pooled saliva complicates wound healing and precipitates fistula-related complications, we devised a continuous suction system to remove saliva during early postoperative recovery. Methods A continuous suction system was implemented in 20 patients after head and neck reconstructive surgery between January 2012 and October 2017. This group was compared to a control group of 16 patients at the same institution. The system was placed orally when the lesion was on the anterior side of the retromolar trigone area, and when glossectomy or resection of the mouth floor was performed. When the orohypopharynx and/or larynx were eradicated, the irrigation system was placed in the pharyngeal area. Results The mean follow-up period was $9.2{\pm}2.4$ months. The Hemovac system was applied for an average of 7.5 days. On average, 6.5 days were needed for the net drain output to fall below 10 mL. Complications were analyzed according to their causes and rates. A fistula occurred in two cases in the suction group. Compared to the control group, a significant difference was noted in the surgical site infection rate (P<0.031). Conclusions Clinical observations showed reduced saliva pooling and a reduction in the infection rate. This resulted in improved wound healing through the application of a continuous suction system.

• Journal of Bio-Environment Control
• /
• v.29 no.1
• /
• pp.89-95
• /
• 2020

Livestock facilities in Korea are on their way of enlargement resulting in increment of livestock manure. When the livestock manure treated inappropriate way during application to the agricultural area, environmental damage can be occurred such as bad smell, water and air pollution. Therefore it is important to make a good management plan for livestock manure treatment. In order to effectively apply organic fertilizer made by livestock manure in terms of quantity and quality, the current status of nutrient in agricultural land should be calculated quantitatively by scientific way. The OECD suggest member countries to calculate the nutrient balance as an agricultural environment indicator which represents the difference between nutrient inputs and outputs of the amount of nutrients in various ways. In this paper, we calculated the nutrient balances according to three cities which have different characteristics such as urban or rural areas. To reduce the nutrient balance, we considered how to reduce the amount of chemical fertilizer by using organic fertilizer made by livestock manure. And public treatment facilities for livestock manure can be a good solution except civil complaints for location selection. Among the options, manure fertilizer application to the agricultural area for cultivation of forage crops was mainly considered to reduce the nutrient balance by decreasing input of chemical fertilizers and increasing output of crop production. Using the field monitoring data, it can be calculated that the daily nitrogen reductions by 116.5 kg/ha and the daily phosphorus increments by 2.7 kg/ha.

• Journal of Environmental Impact Assessment
• /
• v.27 no.5
• /
• pp.475-488
• /
• 2018

Surveying urban tributary vegetation is based mainly on field sampling at present. The tributary vegetation survey integrating UAV NIR(Unmanned Aerial Vehicle Near Infrared Radiance) imagery and in-situ point photo has received only limited attentions from the field ecologist. The reason for this could be the largely undemonstrated applicability of UAV NIR imagery by the field ecologist as a monitoring tool for urban tributary vegetation. The principal advantage of UAV NIR imagery as a remote sensor is to provide, in a cost-effective manner, information required for a very narrow swath target such as urban tributary (10m width or so), utilizing very low altitude flight, real-time geo-referencing and stereo imaging. An exhaustive and realistic comparison of the two techniques was conducted, based on operational customer requirement of urban tributary vegetation survey: synoptic information, ground detail and quantitative data collection. UAV NIR imagery made it possible to identify area-wide patterns of the major plant communities subject to many different influences (e.g. artificial land use pattern), which cannot be acquired by traditional field sampling. Although field survey has already gained worldwide recognition by plant ecologists as a typical method of urban tributary vegetation monitoring, this approach did not provide a level of information that is either scientifically reliable or economically feasible in terms of urban tributary vegetation (e.g. remedial field works). It is anticipated that this research output could be used as a valuable reference for area-wide information obtained by UAV NIR imagery in urban tributary vegetation survey.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.5 no.2 s.17
• /
• pp.9-16
• /
• 2005

This paper presents the use of an Artificial Neural Network (ANN) as a viable means of forecasting Inundation Damage Area (IDA) in many watersheds. In order to develop the forecasting model with various environmental factors, we selected 108 watershed areas in South Korea and collected 49 damage data sets from 1990 to 2000, of which each set is composed of 27 parameters including the IDA, rainfall amount, and land use. After successful training processes of the ANN, a good agreement (R=0.92) is obtained (under present conditions) between the measured values of the IDA and those predicted by the developed ANN using the remaining 26 data sets as input parameters. The results indicate that the inundation damage is affected by not only meteorological information such as the rainfall amount, but also various environmental characteristics of the watersheds. So, the ANN proves its present ability to predict the IDA caused by an event of complex factors in a specific watershed area using accumulated temporal-spatial information, and it also shows a potential capability to handle complex non-linear dynamic phenomena of environmental changes. In this light, the ANN can be further harnessed to estimate the importance of certain input parameters to an output (e.g., the IDA in this study), quantify the significance of parameters involved in pre-existing models, and contribute to the presumption, selection, and calibration of input parameters of conventional models.