• 한국주거학회논문집
• /
• 제16권2호
• /
• pp.75-82
• /
• 2005

The High-rise Residential Buildings are recently consuming a lot of energy because of the vertical height rise in case of supplying cold and hot water. It is required to a appropriate solution in occurring discomfortable use and unexpected conditions of High-rise Residential Buildings on account of the difference of water supply pressure on top and bottom floor, faucet outlet pressure rise. Thus, the purpose of this study is to research on practical use status of Cold and Hot Water Supply System through Question Survey in High-rise Residential Buildings and to analyze problems.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.796-799
• /
• 2007

In the bench scale test unit consisting of four commercial filter elements, the traces of the transient pressure around the nozzle and overpressure in the filter cavity were measured to estimate the effect of nozzle on pulse cleaning. For the given pulse cleaning system, the convergent nozzle displayed better performance than the straight one. The optimum ratio of outlet to inside diameter of convergent nozzle was determined, which minimized the pulse gas consumption and maximized the entrainment effect. The angle and height of nozzle convergent part was also optimum operational condition, which is meaningful to the industrial applying.

• ETRI Journal
• /
• 제10권4호
• /
• pp.118-126
• /
• 1988

A numerical analysis was performed for the flow field in the vertical channels consist of dummy cards and active cards to define the hydrodynamic role of dummy card which is often installed in electronic equipment between active cards to control the cooling air distribution. For a given velocity profile at the inlet and a pressure-based boundary condition at the outlet of the computation domain, the percentage of the flow rate distribution through active channel and dummy channel formed by an active card and dummy card, respectively, were investigated. As a result of present analysis, the pecentage of flow rate through active channel increases quadraticaly with the increase of the ratio of the height of barrier to the width of the dummy channel.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.187-194
• /
• 2010

Shape optimization of an upper plenum of PBMR type gas cooled nuclear reactor has been performed by using three-dimensional Reynolds-Averaged Navier-Stokes (RANS) analysis and surrogate modeling technique. The objective function is defined as a linear combination of uniformity of flow distribution in the core and pressure drop in the upper plenum and the core. The ratio of thickness of slot to diameter of rising channels, ratio of height of upper plenum to diameter of rising channels, and ratio of eight of the slot at inlet to outlet, are used as design variables for optimization. Design points are selected through Latin-hypercube sampling. The optimal point is determined through surrogate-based optimization method which uses 3-D RANS analyses at design points. The results show that the optimum shape represent remarkably improved performance in flow uniformity and friction loss than the reference shape.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.402-406
• /
• 2000

In the Over-The-Range, the outlet size is limited by the industrial standards. Therefor to enlarge the volume of cavity, the installation height of ventilation fan is become small, the system resistance is higher than before. For that reason, the important design variables such as the diameter of a fan, the scroll expansion angle, etc. which play the significant role on flow rate and noise, are confined. In this study, we made an experiment of the diameter of fans relation to scroll expansion angle and investigated flow rate of the length of fans in enlarged cavity volume of OTR, and then we designed the new scroll to improve the flow rate and noise level. As a result, flow rate increased to 110% compared to current scroll and the blade passing frequency of a fan is disappeared by inclined cut-off shapes.

• 한국물환경학회지
• /
• 제28권5호
• /
• pp.686-692
• /
• 2012

This study illustrates how to design and evaluate a non-point sources management detention pond using SWMM. In particular, special attention is given to the orifice design. In SWMM, orifice properties that need to be defined include its height above the bottom of the storage unit, its type, its geometry and its hydraulic properties. Among the various characteristics of orifice, the orifice hole size which is closely related to hydraulic retention time is focused in this study. Sensitivity analysis of orifice size in annual non-point sources reduction efficiency is carried out. In addition, a methodology which can be used to design a virtual junction in SWMM has been proposed to quantify water quality improvement triggered by the detention pond installation. As a result, it is recommended that a detention outlet should be designed to be about 2 to 3 days of hydraulic retention time.

• 센서학회지
• /
• 제14권5호
• /
• pp.291-296
• /
• 2005

In this paper, the PDMS based micromixer having 3-dimension triangular structure has been developed for the reaction of samples in the micro volume. The mixing efficiency was measured according to the change of Reynolds number (Re: 0.08, 0.8, 8, 16) and channel height (100, 200, $300{\mu}m$). Total length of mixing region is 7.4 mm and the measured mixing efficiencies at the outlet were over 85 %. Within the mixing length 2.4 mm, the mixing efficiencies were more than 70 % at any Reynolds numbers, and this indicates the strong mixing has occurred inside the mixing channel due the triangular structures. By employing these 2 mixers, we have fabricated the microreactor to detect the glucose-catalysts reaction. The microreactor showed good reactivity of glucose and enzymes with the small amount of sample solution.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.737-742
• /
• 2006

This paper numerically investigates to evaluate the performance according to the number of passes and the inlet/outlet diameter in a multi-pass multi-branch heat exchanger. A JF factor is used as an evaluation characteristic value to consider the heat transfer rate and the pressure drop simultaneously. It estimates the performance according to the number of passes and the inlet diameter of the reference heat exchanger. When the ratio of the inlet diameter to the header height is about 0.5, the optimum number of passes is selected along with the inlet diameter.

• 대한기계학회논문집B
• /
• 제34권11호
• /
• pp.965-973
• /
• 2010

본 연구에서는 입구영향과 주름높이가 고려된 판형열교환기의 유동 및 열전달특성을 수치적으로 해석하였다. 여러 개의 단위셀을 연결한 다중셀에 입구부와 출구부가 부착된 모델을 기본으로 입구부의 길이변화($L_{cell}{\sim}5L_{cell}$)에 따른 모델과 P/H비 변화($2{\leq}P/H{\leq}4$)에 따른 모델에 대하여 수치해석을 수행하였다. 수치조건은 쉐브론각 $15^{\circ}$, 주름피치 24mm이며, $1,000{\leq}Re{\leq}10,000$이다. 마찰인자는f=$CRe^m$의 형태로, Colburn j 계수는 j=$CRe^m$의 형태로 상관관계식을 제시하였다. 이러한 상관관계식은 향후 판형열교환기 설계시에 기초자료로 활용될 수 있을 것으로 판단된다.

• 한국습지학회지
• /
• 제22권2호
• /
• pp.121-129
• /
• 2020

본 논문은 자유수면을 가지는 와류유동 내 저낙차에서 마이크로 소수력에 관한 실험 연구이다. 내부 곡선 모서리가 있는 직선, 곡선, 비틀린 블레이드의 와류 높이, 터빈 회전 및 토크를 개수로 유입구의 유량 0.0069 ㎥/s 조건에서 측정하였다. 실험결과로서 최적의 와류 강도는 와류 발생부의 외부직경과 유출구 직경 비율 0.17~18.5 범위에서 발생했다. 직선 블레이드 출력과 효율은 다른 블레이드와 비교하여 높게 나타났다. 가장 높게 생성된 에너지는 12.33 W이고, 토크는 0.91 N·m이다. 유효낙차를 고려한 경우 가장 높은 효율은 29.5 %인 반면 와류 높이를 고려한 가장 높은 효율은 회전수 132 rpm에서 80.5 %이다. 직선 블레이드의 와류 유속은 개수로 유입구의 평균 유속보다 약 2.8배 더 크게 나타난다.