• 박물관보존과학
• /
• 제23권
• /
• pp.91-108
• /
• 2020

본 연구는 천안, 공주, 서산, 익산, 나주, 합천에서 출토된 금동관 7점을 중심으로 비파괴 분석법을 활용하여 재질 특성을 조사하였다. 금동관은 고깔 모양의 모관을 기본으로 하며, 전·후입식, 대롱, 수발, 영락 등의 장식을 가감하여 부착된다. 문양은 용문, 봉황문, 초화문, 타출문 등을 조금기법, 투조기법, 인각기법 등으로 시문하였다. 형태적 특징은 제작시기 및 출토 지역에 따라 차이를 보인다. 소지 금속은 순동과 소량의 납이 포함된 동으로 구분된다. 표면 도금은 아말감기법을 사용하였으며, 순금과 소량의 은이 함유된 금으로 분류된다. 옥전 23호 출토품의 은 함량이 높아 지역적인 차이를 보인다. 도금 두께는 백제 금동관에 비해 백제계 금동관인 옥전 23호분이 두꺼운 것으로 평가된다. 도금횟수는 1~2회인 반면 백제계 금동관인 합천 옥전 23호분 금동관은 최대 3회로 평가되며, 차이를 보이는 것을 알 수 있다.

• 한국자원식물학회지
• /
• 제3권1호
• /
• pp.31-40
• /
• 1990

Pericarp and seedcoat removal treatments were tested to determine their effectiveness in the hard-to-germinate botanical seeds of jerusalem artichoke. Fresh seed of five Helianthus tuberosus L.varieties were (A)untreated (B)water soaked overnight (C) soaked overnight followed by renoval of pericarp or (D) soaked overnight followed by renoval of pericarp and seedcoat. The results indicate that treatments which removed the pericarp and seedcoat were the very effective, giving germination of over 90%. A considerable increase in germination did not follow only the peri-carp removal treatments. The factors inhibitory to germination of fresh jerusalem artichoke seed is associated withthe seedcoat. The removal treatment of pericarp and seed-cost is recommended despite its complexity because it givesa high germination percentage and varies least from varietyto variety. Heliarthus tuberosus L., a biomass potential crop, is a member of the family compositae. The genus Helianthushas provided man with two food plants, the sunflower (H.annus) and the jerusalem artichoke or topinambour (H. tube-rosus) . (3) The jerusalem artichoke grown for its tubers, has always been an extremely minor crop, but it is stillgrown in many places as a food for man or livestock and forthe production of alcohoL. Though tubers are used for pro-pagation jerusalem artichoke also flower and produce seedin head-like in florescences. Flowers are developed acro-petaLly on flattened receptacles such that outermost flowers are oldest. Each of these epigynous flowers may develop an achene-type fruit in which outer layers of the overy wallpersist, while inner layers become disorganized. Insidethe ovary wall of mature fruit, there is a papery seedcoat, probably composed of compact cells from endosperm, integu-ments, and nucellus.In general, the efforts to improving this crop havebeen hampered by the hard-to-germinate botanical seed.Seeds did not germinate for at least IL months after harvest.Fresh seeds of some varieties require one year more to gar-minate. (5) Since the time factor between generations isof concern in a prospective breeding program of jerusalemartichoke , these observations led to investigation of thenature of delayed seed germination in jerusalem artichokeas a biomass potential crop.

• Corrosion Science and Technology
• /
• 제11권3호
• /
• pp.96-102
• /
• 2012

0.1 M NaOH 용액에 PbO첨가양이 증가함에 따라 Alloy 600에 형성되는 산화막의 부동태 피막 특성이 열화되었다. 또한 뚜렷한 2중층 구조의 산화막이 점차 사라지고, 산화막내 존재하는 납의 양이 증가하였다. 산화막 내부 납의 양이 증가함에 따라 산화막 내부 니켈의 결핍이 점차 커졌다. 납에 의해 산화막의 부동태 특성이 약화됨에 따라, 응력부식균열 저항성 또한 급감하였을 것으로 판단된다.

• 대한조선학회논문집
• /
• 제57권4호
• /
• pp.213-220
• /
• 2020

In the present paper, implosion responses of two adjacent cylindrical tubes under external hydrostatic pressure were experimentally investigated. The cylinder models were fabricated of aluminium alloy 6061-T6 commercial tubes. In the experiment, a pair of two-cylinders were placed inside of a support frame in a medium-size pressure chamber, whose design pressure was 6.0MPa. The distance between the two-cylinders was 30 millimeter measured from outer shell at the mid-length. The implosion tests were performed with water and compressed nitrogen gas as the pressurizing media. The ambient static pressure of the chamber and local dynamic pressure near the two-imploded models were measured simultaneously. It was found that the energy released during an implosion from the first, weaker cylinder triggered the instability of the second, stronger cylinders. In other words, the resulting shock wave of the first implosive impact from the weaker cylinder could cause the premature failure of the neighboring stronger cylinders. The non-contact implosion phenomena from the two-cylindrical tube were clearly observed.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.550-551
• /
• 2013

Large-area RF-driven ion source is being developed at Germany for the heating and current drive of ITER plasmas. Negative hydrogen (deuterium) ion sources are major components of neutral beam injection systems in future large-scale fusion experiments such as ITER and DEMO. RF ion sources for the production of positive hydrogen ions have been successfully developed at IPP (Max-Planck- Institute for Plasma Physics, Garching) for ASDEX-U and W7-AS neutral beam injection (NBI) systems. In recent, the first NBI system (NBI-1) has been developed successfully for the KSTAR. The first and second long-pulse ion sources (LPIS-1 and LPIS-2) of NBI-1 system consist of a magnetic bucket plasma generator with multi-pole cusp fields, filament heating structure, and a set of tetrode accelerators with circular apertures. There is a development plan of large-area RF ion source at KAERI to extract the positive ions, which can be used for the second NBI (NBI-2) system of KSTAR, and to extract the negative ions for future fusion devices such as ITER and K-DEMO. The large-area RF ion source consists of a driver region, including a helical antenna (6-turn copper tube with an outer diameter of 6 mm) and a discharge chamber (ceramic and/or quartz tubes with an inner diameter of 200 mm, a height of 150 mm, and a thickness of 8 mm), and an expansion region (magnetic bucket of prototype LPIS in the KAERI). RF power can be transferred up to 10 kW with a fixed frequency of 2 MHz through a matching circuit (auto- and manual-matching apparatus). Argon gas is commonly injected to the initial ignition of RF plasma discharge, and then hydrogen gas instead of argon gas is finally injected for the RF plasma sustainment. The uniformities of plasma density and electron temperature at the lowest area of expansion region (a distance of 300 mm from the driver region) are measured by using two electrostatic probes in the directions of short- and long-dimension of expansion region.

• 한국수소및신에너지학회논문집
• /
• 제22권6호
• /
• pp.800-809
• /
• 2011

The reaction characteristics of an integrated reactor with steam reformer and catalytic combustor using anode offgas for high temperature fuel cells such as MCFC and SOFC have been experimentally investigated in the present study. The coupled reactor had a coaxial cylindrical shape, and the inner and the outer tube was packed with combustion catalysts and reforming catalysts, respectively. Thus, the endothermic steam reforming could proceed by absorbing heat from catalytic combustion of anode offgas. Results show that increasing inlet temperature and decreasing excess air ratio increased the reformer temperature, which led to the increase in $H_2$ yield. The reforming performance for SOFC conditions was better than that for MCFC conditions since the composition of flammable components became smaller for MCFC cases. Measured reformate composition under various test conditions correlated well with thermal equilibrium composition.

• Korean Chemical Engineering Research
• /
• 제46권5호
• /
• pp.983-987
• /
• 2008

IGCC 파일럿 플랜트의 집진시스템을 최적 설계하기 위하여 수치해석을 수행하였다. 서로 다른 가스 유입 방식이 집진용기 내부의 유체 유동장과 입자 거동에 미치는 영향을 분석하였다. 필터 표면에 전달되는 입자의 부하율은 분진입자가 혼합된 가스가 내부에 차단관이 설치된 집진용기의 외벽에 접하게 설치된 접선 유입구를 따라 집진용기 내로 유입되는 경우 아주 낮았으며, 입자크기가 클수록 입자부하율은 급격히 감소하였다. 이에 반하여, 가스 유동이 집진용기의 필터지지판 중앙에 수직하게 설치된 수직 유입구를 통하여 집진용기 내로 유입되는 경우, 필터 표면으로의 입자 부하율이 아주 높았으며, 입자크기 증가에 따른 입자부하율의 감소는 접선 유입 방식에 비하여 크지 않았다.

• 산업기술연구
• /
• 제18권
• /
• pp.249-258
• /
• 1998

In this paper, we investigated the post-combustion removal of nitrogen oxide($NO_x$) and sulfur oxide($SO_x$) which is based on the gas to particle conversion process by the pulsed corona discharge. Under normal pressure, the pulsed corona discharge produces the energetic free electrons which dissociate gas molecules to form the active radicals. These radicals cause the chemical reactions that convert $SO_x$ and $NO_x$ into acid mists and these mists react with $NH_3$ to form solid particles. Those particles can be removed from the gas stream by conventional devices such as electrostatic precipitator or bag filter. The reactor geometry was coaxial with an inner wire discharge electrode and an outer ground electrode wrapped on a glass tube. The simulated flue gas with $SO_x$ and $NO_x$ was used in the experiment. The corona discharge reactor was more efficient in removing $SO_x$ and $NO_x$ by adding $NH_3$ and $H_2O$ in the gas stream. We also measured the removal efficiency of $SO_x$ and $NO_x$ in a cylinder type corona discharge reactor and obtained more than 90 % of removal efficiency in these experimental conditions. The effects of process variables such as the inlet concentrations of $SO_x$, $NH_3$ and $H_2O$, residence time, pulse frequencies and applied voltages were investigated.

• 한국환경보건학회지
• /
• 제37권3호
• /
• pp.218-225
• /
• 2011

Objectives: In this paper, a dielectric barrier discharge (DBD) plasma reactor was investigated for degrading the dye Rhodamine B (RhB) in aqueous solutions. Methods: The DBD plasma reactor system in this study consisted of a plasma component [titanium discharge (inner), ground (outer) electrode and quartz dielectric tube], power source, and gas supply. The effects of various parameters such as first voltage (input power), gas flow rate, second voltage (output power), conductivity and pH were investigated. Results: Experimental results showed that a 99% aqueous solution of 20 mg/l Rhodamine B is decolorized following an eleven minute plasma treatment. When comparing the performance of electrolysis and plasma treatment, the RhB degradation of the plasma process was higher that of the electrolysis. The optimum first voltage and air flow rate were 160 V (voltage of trans is 15 kV) and 3 l/min, respectively. With increased second voltage (4 kV to 15 kV), RhB degradation was increased. The higher the pH and the lower conductivity, the more Rhodamine B degradation was observed. Conclusions: OH radical generation of dielectric plasma process was identified by degradation of N, N-dimethyl-4-nitrosoaniline (RNO, indicator of OH radical generation). It was observed that the effect of UV light, which was generated as streamer discharge, on Rhodamine B degradation was not high. Rhodamine B removal was influenced by real second voltage regardless of initial first and second voltage. The effects of pH and conductivity were not high on the Rhodamine B degradation.

• 천문학회보
• /
• 제37권2호
• /
• pp.138.2-138.2
• /
• 2012

Cave on the Moon is considered as the most appropriate place for human to live during the frontier lunar exploration. While the lava flows, the outer crust gets cooled and solidified. Then, the empty space is remained inside after lava flow stops. Such empty space is called the lava caves. Those lava tubes on the Earth are formed mostly by volcanic activity. However, the lava tubes on satellite like Moon and planet like Mars without volcanic activity are mostly formed by the lava flow inside of the crater made by large meteorite impact. Some part of lava tube with collapsed ceiling appears as the entrance of the cave. Such area looks like a deep crater so called a pit crater. Four large pit craters with diameter of > 60 m and depth of > 40 m are found without difficulty from Kaguya and LRO mission image archives. However, those are too deep to use as easily accessible human frontier base. Therefore, now we are going to identify some smaller lunar caves with accessible entrances using LRO camera images of 0.5 m/pixel resolution. Earth's lava caves and their entrances are well photographed by surface and aerial camera in immense volume. Thus, if the image data are sorted and archived well, those images can be used in comparison with the less distinct lunar cave and entrance images due to its smaller size. Then, we can identify the regions on the Moon where there exist caves with accessible entrances. The database will be also useful in modeling geomorphology for lunar and Martian caves for future artificial intelligence investigation of the caves in any size.