• Applied Microscopy
• /
• 제41권1호
• /
• pp.13-20
• /
• 2011

바다빙어목(Osmeriformes), 바다빙어과(Osmeridae)에 속하는 빙어(Hypomesus nipponensis)의 성숙란 난막구조를 광학현미경과 전자현미경을 이용하여 관찰하였다. 빙어의 성숙란은 두 개의 난막으로 둘러싸여 있었으며 바깥쪽 난막의 외층은 한 층의 여포세포가 분포하고 있었고 안쪽의 난막 바깥쪽은 호염기성을 나타내는 구조물들이 배열하고 있었다. 난막의 단면을 투과전자현미경으로 관찰한 결과 두 개의 난막 중 바깥쪽 막은 전자밀도가 균일한 한 층으로 되어 있었고 안쪽막은 전자밀도가 높은 6층이 전자밀도가 낮은 5층에 의해서 분리되어 층상구조를 하고 있었다. 주사전자현미경으로 관찰한 결과 바깥쪽 막은 홈들이 관찰되었고 안쪽막 표면은 무정형의 구조물들이 산재하고 있었다. 또한 동물극 쪽에 한 개의 난문이 관찰되었다. 이상과 같이 빙어의 성숙란은 지금까지 보고된 경골어류의 경우 한 개의 난막으로 둘러싸여 있는데 비해서 두 개의 난막으로 둘러싸여 있다는 것은 매우 중요한 빙어의 종특이성을 나타내며 난막의 미세구조적 특징들은 종을 분류하는 데 이용될 수 있다.

• 한국해양바이오학회지
• /
• 제2권2호
• /
• pp.123-125
• /
• 2007

Vibrio anguillarum is a gram-negative bacterium that causes vibriosis in approximately 80 different fish species. V. anguillarum produces several exotoxins are correlated with the pathogenesis of vibriosis. This study is focused on the composition of the outer membrane vesicle. Most of gram-negative bacteria produce outer membrane vesicle (OMV) during cell growth. OMV was formed from the outer membrane surface of cell and than released to extracellular environment. OMV consists of outer membrane lipids, outer membrane protein (OMP), LPS, and soluble periplasmic components. Also, they contain toxins, adhesions, and immunomodulatory. Many gram-negative bacteria were studied out forming OMV. In Vibrio sp., formation of OMV by electron microscopy has been reported from V. cholerae and V. parahaemolyticus. In present study, we isolated OMV from V. anguillarum and OMV protein was separated by SDS-PAGE. Magor band was sliced and analyzed by MALDI-TOF. The major protein band of 38kDa was identified as OmpU by MALDI-TOF MS analysis.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제18권2호
• /
• pp.77-82
• /
• 2009

The egg shell of the tropical tasar silkworm, Antheraea mylitta is formed from the substances secreted by the follicular epithelium during the late vitellogenic stage. TEM study reveals the inner travecular and outer lamellar layer of chorion. The travecular layer is composed of the innermost wax layer, inner and outer chorionic layer. The inner and outer chorionic layers are connected to each other by vertical pillers forming of cavities. The lamellar layer is perforated by the aeropyles. SEM study reveals the differentiation of an anterior surface of the egg shell into four zones-micropylar, edge, aeropyles crown and disc zone. In the mycosis infected eggs the aeropyles and egg-shell surface are fully packed with the hyphae of the fungus, Aspergillus sydowi blocking of plastron respiration and causing the death of developing embryo so that mycosis infected eggs become sterile.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.344-347
• /
• 2008

We fabricated the outer type-dynamic microlens array using a surface-stabilized ferroelectric liquid crystal, UV curable polymer and the stacked liquid crystalline polymer. The outer type-microlens array has a lower driving voltage and fast switching property. It is applicable to a variety of optical systems.

• 소성∙가공
• /
• 제15권3호
• /
• pp.241-246
• /
• 2006

The isotropic steel sheet was developed and started to apply on the auto-body outer panel, however the characteristics of application on auto-body were not well known. In this paper the FE analysis of outer panel of auto-body was carried out to investigate the characteristics of isotropic steel sheet. For the FE analysis of the roof panel of ULSAB body the isotropic steel sheet and the bake hardening steel sheet were used. The Isotropic steel sheet shows more deformation at punch bottom area of roof panel than the bake hardening steel sheet that is most required forming properties far outer panel to obtain the shape likability of forming parts. It is shown that the isotropic steel sheet has suitable material properties far outer panels of auto-body.

• Ocean and Polar Research
• /
• 제25권4호
• /
• pp.459-468
• /
• 2003

Annual variation of water qualities in the Shihwa Lake were observed 18 times from June 1996 to October 2001. We studied at the station of the upper streams and near the water gate of lake. After the flow of the outer seawater through the water gate, the surface salinity in Shihwa Lake increased to the range of 25-30 psu in both stations after October 1998. Due to the declination of the salinity differences between the surface and the bottom water, the pycnocline in which had existed until 1997 has weakened, and made the water column mix vertically. This led to the improvement of anoxic/hypoxic environment at bottom waters after April 1998. However, despite the continuous flow of the outer seawater, the concentrations of chlorophyll-a at surface layer were varied from $2{\mu}g/l\;to\;60{\mu}g/l$, and these values indicated the eutrophication. The following organic matter load was greatly influencing the surface layer's COD concentration. During the rainy season, the salinity at the surface layer to the below 15 psu resulting in stratification between the surface and bottom layer. Organic matters that were provided from the surface layer to the bottom layer due to active primary production in the year exhausted dissolved oxygen at the bottom layer, and the bulks of organic matters at bottom gave rise to hypoxic or anoxic environment. It was observed that the enrichment of ammonia and phosphate were main factors to worsen the water quality of the Shihwa Lake. The results of examining the annual variations in Shiwha Lake through principal component analysis shown that water characteristics in the rainy season were similar with those before input of outer sea water.

• Fibers and Polymers
• /
• 제4권4호
• /
• pp.161-168
• /
• 2003

An investigation of the dimensionless torque in the newly developed cone drum twister texturing mechanism is reported. The cone drum twister is one of the outer surface contacting friction-twisting devices in false-twist texturing. In this cone drum twister, a filament yam passes over the surface of the cone drum that rotates by the passing yarn without a special driving device. This research is composed of the theoretical analysis of the false twisting mechanism and the experimental analysis at room temperature. The equations have been derived which shows interrelationship of the conical angle of cone drum, the wrapping angle, the drag angle, and the yam helix angle. Theoretical values of dimensionless torque were calculated and were compared with the experimental results. It is shown that, as the conical angle and the projected wrapping angle increased, the dimensionless torque also increased. But the conical angle was reached to ${30.75}^{\circ}C$, the dimensionless torque decreased.

• 환경생물
• /
• 제40권4호
• /
• pp.374-386
• /
• 2022

Phytoplankton communities, with emphasis on picoplankton and nanoplankton, were investigated in Gamak Bay, South Korea, where freshwater input and coastal water intrusion shape ecosystem functions. Shellfish farms and fish farms are located in the inner bay and outer bay, respectively, and tides translocate uneaten food and urine production from aquaculture farms toward the inner bay. Water masses were distinctly different based on a significantly different density between the surface and bottom layer and among three water masses, including the inner bay, outer bay, and Yeosu Harbor. Phytoplankton communities were quantified using flow cytometry and size-fractionated chlorophyll-a (chl-a) was measured. Salinity was a principal variable separating phytoplankton communities between the surface and bottom layer, whereas Si(OH)₄ controlled the communities in the inner bay, and NH₄⁺ and PO₄^3- governed the outer bay communities. While phycocyanin-containing (PC) cyanobacteria dominated in the outer bay, phycoerythrin-containing (PE) cyanobacteria dominance occurred with cryptophyte dominance, indicating that nutrients affected the distribution of pico- and nanoplankton and that cryptophytes potentially relied on a mixotrophic mode by feeding on PE cyanobacteria. Interestingly, picoeukaryotes and eukaryotes larger than 10 ㎛ were mostly responsible for the ecological niche in the western region of the bay. Given that chl-a levels have historically declined, our study highlights the potential importance of increased small phytoplankton in Gamak Bay. Particularly, we urge an examination of the ecological role of small phytoplankton in the food supply of cultivated marine organisms.

• Nuclear Engineering and Technology
• /
• 제55권12호
• /
• pp.4317-4328
• /
• 2023

To ensure the measuring accuracy of the wall temperature, the outer wall temperature measurement values by using three kinds of thermocouple welding methods were analyzed and evaluated in the paper, including single-point flush-mounted in the wall groove method, single-point insert-mounted in the wall groove, and outer surface direct welding method, based on the application of a tube-in-tube condensing heat exchanger. And the impacts of silver, tin, and thermal resistance adhesive as filling materials on wall temperature measurement were also investigated, and the results were compared to that obtained without filling materials. The results showed that the wall temperatures measured by the three welding methods were lower than the theoretically calculated value. And the wall temperature measured by the outer surface direct welding method was lowest under the same experimental conditions. The wall temperatures measured by single-point flush-mounted and insert-mounted in the wall groove methods were also affected by different welding filling materials. It was found that the greater the thermal resistance of filling materials, the smaller the heat loss. By analyzing the reasons for the low measured value of wall temperature, a new wall temperature measurement method was developed to improve the accuracy of the current measurement method. Meanwhile, the outer wall temperature measurement experiments of vertical and horizontal heat transfer tubes were carried out to validate and calibrate the improved outer wall temperature measurement method. The results showed that the average outer wall temperature deviation measured by the improved wall temperature measurement method ranged from - 0.82% to +2.29% for vertical tubes and - 4.75% to - 1.44% for horizontal tubes, and the improved measurement method had good measurement accuracy.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 1999년도 춘계학술발표회 초록집
• /
• pp.88-88
• /
• 1999