• 한국환경보건학회지
• /
• 제36권5호
• /
• pp.402-410
• /
• 2010

The objectives of this study were to evaluate the air quality surrounding an indoor swimming pool, to estimate the cancer risk based on the airborne exposure to trihalomethanes (THMs), and to examine the ventilation efficiency by Computational Fluid Dynamics (CFD). Chlorine and THMs were measured poolside, and in the staff room and reception area. The indoor swimming pool was modeled using the Airpak program, with ventilation drawings and actual survey data. Temperature, flow and mean age of the air were analyzed. Levels of chlorine poolside, and in the staff room, and reception area were $203\;{\mu}g/m^3$, $5\;{\mu}g/m^3$, and $10\;{\mu}g/m^3$, respectively. Chloroform was the dominant THM in all sampling sites and mean concentrations were $16.30\;{\mu}g/m^3$, $0.51\;{\mu}g/m^3$, and $0.06\;{\mu}g/m^3$ poolside, in the staff room and reception area, respectively. Bromodichloromethane and Dibromochloromethane levels were respectively estimated as $10.3\;{\mu}g/m^3$ and $1.7\;{\mu}g/m^3$ poolside, $1.3\;{\mu}g/m^3$ and $0.1\;{\mu}g/m^3$ in the staff room, and were not detected in the reception area. The cancer risks from inhalation exposure to THMs were estimated between $3.37{\times}10^{-7}$ and $1.84{\times}10^{-5}$. A short circulation phenomenon was observed from the supply air vents to the exhaust air vents located in the ceiling. A high temperature layer was formed within one meter of the ceiling, and a low temperature layer was formed under this layer due to the low velocity and high temperature of the supply air, and the improper locations of the supply air vents and exhaust air vents. The stagnation was evident at the above adult pool and the mean age of the air was 22 minutes. Disinfection by-products in the indoor swimming pool were present in higher concentrations than in the outdoor air. In order to increase the removal of pollutants, adjustment was required of the supply air volume and the supply/exhaust position.

• 환경영향평가
• /
• 제28권5호
• /
• pp.440-456
• /
• 2019

본 연구는 미세먼지에 대한 야외활동의 위험인식의 논란에 따른 미세먼지 우려의 본질을 파악해보고자 미세먼지의 노출로 건강에 영향을 많이 받는 자전거 커뮤니티를 대상으로 카페글과 댓글을 수집하여 분석하였다. 그 결과 첫째, 정부에서 주도한 미세먼지 정책은 매 시기별로 견고해지고, 세분화되고 있었지만 자전거 커뮤니티 내에서의 미세먼지 위험인식은 시간흐름에 따라 논의가 활성화되고, 심각해지고 있었다. 둘째, 미세먼지 우려로 인한 야외활동 인식변화를 분석한 결과 자전거 커뮤니티 회원들은 날씨 변수보다 미세먼지 등급에 따라 야외활동 여부가 달라지는 양상을 보였다. 또한 국내 미세먼지 수치나 마스크 성능에 대한 불신과 맞물리면서 일상생활과 건강에 심각한 위협을 주는 공포의 대상으로 변화되고 있었다. 궁극적으로 이러한 미세먼지 위험인식은 주로 야외에서 즐겼던 자전거활동 일부를 실내공간으로 이동하게 하였다. 하지만 경관, 사람, 날씨 등 야외에서 다양한 요소들을 누리며 즐겼던 자전거활동에 비해 단조로운 실내 자전거운동은 헬스, 요가 등의 다른 실내운동 유형으로 전환되고 있었다. 종합적으로 살펴보면 미세먼지에 대한 자전거 이용객의 위험인식이나 야외 자전거활동의 인식변화는 정부나 지자체 등에서 제공하는 미세먼지 농도수치의 정확성, 중국영향, 국내 어플리케이션 신뢰성, 마스크 성능, 미세먼지 농도 제시방법(숫자제시형, 점적 데이터 제공) 등 정책 불신과 검증되지 않는 과도한 정보 오류로 인한 논란이 가장 큰 역할을 하고 있는 것으로 도출되었다. 따라서 모든 계층을 아우르는 종합적 사회방안이나 정부주도형 미세먼지 정책을 제시하기보다 자전거 이용객들의 눈높이에서 미세먼지로 인한 건강상의 위험을 인지하는 것이 필요하다. 또한 총체적 유기적으로 미세먼지를 인식하도록 돕는 체감형 위험 커뮤니케이션이나 교육 및 홍보과정이 선행되어야 하고, 단계별 토의를 통한 사회적 합의와 함께 향후 야외활동 유형별로 세분화된 체계적 연구가 추진되어야할 것으로 판단된다. 이에 따라 본 연구는 정부와 지자체, 언론, 국민들의 효과적인 커뮤니케이션 방향 모색을 위한 학술적 근거로 제공될 수 있을 것으로 기대된다.

• 한국의류학회지
• /
• 제28권12호
• /
• pp.1554-1561
• /
• 2004

골퍼들은 레저활동의 특성상 장시간 자외선에 노출이 되므로 피부 보호를 위한 햇빛 노출 예방에 대한 관심이 미국에서 고조되고 있다. 본 연구는 자외선 차단의복을 예방혁신제품으로 하여, 제품의 인지된 속성이 잠재적 소비자의 수용의도에 미치는 영향을 Rogers의 혁신확산이론에 비추어 연구하였다. 또한 혁신제품이 건강관련 제품이므로, 수용의도에 미치는 골퍼들의 현재 자외선 차단행동의 영향을 고찰하였다. 임의 표집 방법을 이용, 미국내 골퍼들을 표본으로 하여 설문지 조사법으로 자료를 수집하였다. 최종 158 명의 응답자 중 $91\%$가 남성골퍼 였으며, 평균나이는 30세 였다. 응답자의 $25\%$정도만이 피부노출 방지를 위한 차단행동을 하는 것으로 나타났으며, 대부분의 응답자들은(약$70\%$) 자외선 차단의복 특성에 대해 부정적인 태도를 보였다. 현재의 자외선 차단 행동 및 인지된 다섯개의 혁신속성을 회귀분석법으로 측정한 결과, 시용의 용이성, 자외선 차단 행동, 일치성, 상대적 우월성 순으로 자외선 차단 의복 수용의도를 예측하는데 중요한 변인으로 나타났다. 피부보호와 관련된 예방혁신제품의 수용정도는 현재의 자외선차단 행동이 영향을 주며, 또한 제품의 외관적, 성능적 속성들도 일반 의류제품과 마찬가지로 소비자의 제품 수용시 고려되는 중요한 변인임을 알수 있다.

• Journal of Radiation Protection and Research
• /
• 제13권2호
• /
• pp.9-20
• /
• 1988

자연 방사선 피폭선량 중 우주선 전리 성분의 기여를 정량하기 위하여 LiF TLD를 이용하여 약 1년반에 걸쳐 3개월 간격의 주기적 측정을 수행하였다. TLD는 세 가지를 사용하였는데 그것은 칩과 PTFE원판형으로 된 두 가지의 $^{7}LiF$와 중성자 성분의 기여를 가려내기 위한 원판형의 $^{6}LiF$였다. 선량 측정은 뱃지에 넣은 TLD를 충남대학교 대덕 캠퍼스의 한4층 콘크리트 건물내 3층의 한 연구실에 설치한 10-15cm 두께의 납차폐 상자에 넣어서 90일 간격으로 다섯주기 동안 수행하였다. 비교 연구를 위하여 3'${\phi}\;{\times}\;3$'원통형NaI(Tl) 섬광 검출기와 1024채널 MCA를 이용하여 3MeV 이상의 우주선 경성분에 대한 분광분석을 병행하였는데 그 결과 옥내 차폐체를 이용한 TLD측정치는 옥외 우주선 전리 성분의 약 75%를 측정하고 있음이 밝혀졌다. 이와 같은 차폐 손실을 보정한 TLD측정 결과에 의하면 충남대 대덕 캠퍼스 옥외에서 우주선 전리 성분의 기여는 $34.3{\pm}1.1nGy-h^{-1}$로 나타났는데 이것은 이 측정 지점에서 예측할 수 있었던 선량 값과 매우 잘 일치하는 것이다.

• 한국가스학회지
• /
• 제27권4호
• /
• pp.12-18
• /
• 2023

독성 가스 누출 사고 발생 시 인명 피해를 최소화하기 위해서는 사고 시나리오에 따른 적절한 대피 방법이 사전에 수립되어야 한다. 본 연구에서는 동일 누출 조건에서 건축물의 방향과 산업단지 위치가 실내 농도 증가와 실외 확산에 미치는 영향을 살펴보고 효과적인 대피 기준을 마련하였다. 또한 이러한 기준을 바탕으로 화학사고 인명 피해 최소화라는 관점에서 건물을 건설할 때 건물 방향에 대한 기준도 마련하였다. 건물의 방향이 누출 방향에 대해 정면, 측면, 후면인 경우에 대해 전산 수치 해석을 수행하였으며, 그 결과 건물 창문이 누출되어 오는 방향과 마주보고 있을 때의 실내 오염농도가 반대편에 창문이 있을 때의 실내 오염농도와 비교하여 120배 정도 높게 나왔다. 또한, 급격한 실내 농도 증가율로 동일 시간에 실내 공간이 2배 이상 독성 가스 물질로 가득하게 되었다. 이러한 현상은 건물 창문이 정면에 위치한 경우 창문 주위의 압력 차와 속도 저하로 건물 주위에 독성 가스가 정체하게 되는 것으로 나타났다. 본 연구 결과를 바탕으로 최적 대피를 위한 건축물 방향 기준을 설정한다면 화학사고 발생 시 주민들의 피해를 최소화하는 데 도움이 될 것으로 판단된다.

• 한국환경보건학회지
• /
• 제44권2호
• /
• pp.143-152
• /
• 2018

Objectives: The purpose of this study was to provide basic data for air pollutant exposure modelling and understanding the contribution of respective microenvironments by assessing the time-activity patterns of Korean students according to variables such as grade, sex, weekday, and weekend. Methods: In this study, we compared the residential time of 521 (both weekday and weekend) lower elementary students, 1,735 (1,054 on weekdays, 681 on weekends) upper elementary students, 2,210 (1,294 on weekdays, 916 on weekends) middle school students, and 2,366 (1,387 on weekdays, 979 on weekends) high school students in different microenvironments according to grade, sex, weekday, and weekend. We used data from the 2014 Time-Use Survey by the Korean National Statistical Office for upper elementary students through high school students, and surveyed time-activity patterns of 521 lower elementary students aged 7-9 years. Each microenvironment was divided into indoor, outdoor, and transport. Indoor environments were divided into home, school, and other places. In addition, the results of previous studies were compared to this study. Results: Weekday time-activity patterns of Korean students indicated that lower elementary students spent $16.02{\pm}2.53hr$ in the home and $5.37{\pm}2.32hr$ in school. Upper elementary students spent $14.11{\pm}1.79hr$ in the home and $6.27{\pm}1.37hr$ in school. Middle school students spent $12.83{\pm}2.22hr$ in the home and $7.48{\pm}1.88hr$ in school. High school students spent $10.65{\pm}2.86hr$ in the home and $10.23{\pm}2.86hr$ in school on weekdays. High school students spent the least amount of time in the home and the most time in school compared to other grades Conclusions: Students spent most of their time indoors, including in the home, school, and other indoors. On weekdays, as the grade increases, home residential times were decreased and school residential times were increased. Differences in time-activity patterns according to sex were not found for either weekdays or weekends. It is estimated that Korean students could be affected by school indoor air quality. High school students could be most affected by school indoor air quality since they spent the most time at school.

• 한국환경보건학회지
• /
• 제41권1호
• /
• pp.11-16
• /
• 2015

Objectives: This study assessed the impact of the smoke-free law on secondhand smoke exposure in computer game rooms by measuring concentrations of particulate matter smaller than $2.5{\mu}m$($PM_{2.5}$). Methods: Indoor $PM_{2.5}$ concentrations were measured in 56 (during the smoke-free guidance period) and 118 computer game rooms (after the law went into effect) in four cities (Seoul, Cheonan, Daegu and Kunsan) in Korea. The number of smokers in the computer game rooms was also counted every five minutes. Results: Although a smoking ban had been implemented nationally, smoking was observed in 47% of the computer game rooms. Smoking density decreased from 1.62 persons per $100m^3$ during the guidance period to 0.32 persons per $100m^3$ after the smoke-free law. There is no statistically significant difference of $PM_{2.5}$ concentrations before and after the smoking ban. The $PM_{2.5}$ concentration was two times higher than the US NAAQS of $35{\mu}g/m^3$. The $PM_{2.5}$ concentration in computer game rooms without smokers was two times higher than the outdoor concentration. Conclusion: The smoke-free law in computer game rooms was complied with, even after the guidance period, in Korea. Indoor $PM_{2.5}$ concentration after smoke-free law implementation was high due to this non-compliance. High $PM_{2.5}$ concentration in computer game rooms without smokers might be due to smoking booths. The complete prohibition of smoking in computer game rooms should be implemented to protect patrons from secondhand smoke exposure.

• 한국환경보건학회지
• /
• 제37권6호
• /
• pp.406-417
• /
• 2011

Objectives: Exposure to bioaerosols in the indoor environment could be associated with a variety adverse health effects, including allergic disease such atopy. The objectives of this study were to assess children's exposure to bioaerosol in home indoor environments and to evaluate the association between atopy and bioaerosol, environmental, and social factors in Ulsan, Korea. Methods: Samples of viable airborne bacteria and fungi were collected by impaction onto agar plates using a Quick Take TM 30 and were counted as colony forming units per cubic meter of air (CFU/$m^3$). Bioaerosols were identified using standard microbial techniques by differential stains and/or microscopy. The environmental factors and possible causes of atopy based on ISAAC (International Study of Allergy and Asthma in Childhood) were collected by questionnaire. Results: The bioaerosol concentrations in indoor environments showed log-normal distribution (p < 0.01). Geometric mean (GM) and geometric standard deviation (GSD) of airborne bacteria and fungi in homes were 189.0 (2.5), 346.1(2.0) CFU/$m^3$, respectively. Indoor fungal levels were significantly higher than those of bacteria (p < 0.001). The concentration of airborne bacteria exceeded the limit recommended by the Korean Ministry of Environment, 800 CFU/$m^3$, in three out of 92 samples (3.3%) from 52 homes. The means of indoor to outdoor ratio (I/O) for airborne bacteria and fungi were 8.15 and 1.13, respectively. The source of airborne bacteria was not outdoors but indoors. GM of airborne bacteria and fungi were 217.6, 291.8 CFU/$m^3$ in the case's home and 162.0, 415.2 CFU/$m^3$ in the control's home respectively. The difference in fungal distributions between case and control were significant (p = 0.004) and the odds ratio was 0.996 (p = 0.027). Atopy was significantly associated with type of house (odds ratio = 1.723, p = 0.047) and income (odds ratio = 1.891, p = 0.041). Some of the potential allergic fungal genera isolated in homes were Cladosporium spp., Botrytis spp., Aspergillus spp., Penicillium spp., and Alternatia spp. Conclusions: These results suggest that there this should be either 'was little' meaning 'basically no significant association was found' or 'was a small negative' mean that an association was found but it was minor. It's a very improtant distinction. Association between airborne fungal concentrations and atopy and certain socioeconomic factors may affect the prevalence of childhood atopy.

• 한국환경독성학회:학술대회논문집
• /
• 한국환경독성학회 2003년도 추계국제학술대회
• /
• pp.57-69
• /
• 2003

It is well known that many pesticides possess hormonal activity, and affect the developments of wildlife and mammals including human. Currently, pyrethroid insecticides are in worldwide use to control in and outdoor pests, providing potential far environmental exposure. Hormonal activities of these pyrethroid insecticides, however, have been little studied, and the developmental effects of them were no reported. Therefore, we firstly examined the potential estrogenic activities of some pyrethroid insecticides (permethrin, cypermethrin, tetramethrin, deltamethrin, sumithrin, fenvalerate and bioallethrin) by immature rat uterotrophic assay, luciferase reporter gene assay and Calbindin-D$\sub$9k/ (CaBP-9k) gene expression assay. Uterine wet weights were increased by permethrin and the permethrin-induced weights were inhibited by ICI 182780 in the uterolrophic assay. On the other hand tetramethrin significantly reduced uterine and vaginal wet weights, and also inhibited the E2-induced weight increases at all doses tested. Cypermethrin and sumithrin had a tendency to increase uterine weights, although not statistically significant. Permethrin and cypermethrin dose-dependently increased the luciferase activity in reporter gene assay. Northern blot analysis showed that permethrin induced CaBP-9k mRNA expression whereas tetramethrin inhibted. Subsequent studies were conducted to investigate the possible developmental effects of four pyrethroid insecricides (permethrin, cypermethrin, sumithrin and teramethrin). Either diethlbestrol (DES) or 17${\beta}$ -estradiol (E2) was used as a reference control in this study. Pyrethroid insecticides were administered to Sprague Dawley rats via subcutaneous injection at 6 to 18 days of gestation or 1 to 5 days after birth. In utero treatment of permethrin (10mg/kg/day) in female rat resulted in significant increases in uterine and ovarian weights while significant decreases in serum E2 concentration, uterine and ovarian ER${\alpha}$ mRNA levels. Sumithrin and permethrin led to acceleration in vaginal opening of female rat, while delay in preputial separation of male after neonatal treatment. Anogenital distances of PND 18 were significantly reduced in sumthrin-treated, and permerhrin-treated male rats after neonatal treatment. All the pyrethroid insecticides tested caused significant increases in uterine weights on PND 18, while significant reductions in the first diestrus phase when neonataly treated. In addition, exposure to pyrethroids in neonatal period led to significant reduction in relative brain weight in female rat on PND 18, but its weight was recovered in diestrus phase. In summary, Our experimental data demonstrate the possibilities of developmental effects of pyrethroid insecticides via estrogenic or antiestrogenic activity.

• 한국산업보건학회지
• /
• 제30권2호
• /
• pp.153-162
• /
• 2020

Objectives: 3D printing technologies have become widely developed and are increasingly being used for a variety of purposes. Recently, the evaluation of 3D printing operations has been conducted through chamber test studies, and actual workplace studies have yet to be completed. Therefore, the objective of this study was to determine the emission of volatile organic compounds(VOCs), metals, and particles from printing operations at a workplace. This included monitoring conducted at a commercial 3D printing service workplace where the processes involved material extrusion, material jetting, binder jetting, vat photo polymerization, and powder bed fusion. Methods: Area samples were collected with using a Tenax TA tube for VOC emission and MCE filter for metals in the workplace. For particle monitoring, Mini Particle Samplers(MPS) were also placed in the printer, indoor work area, and outdoor area. The objective was to analyze and identify particles' size, morphology, and chemical composition using transmission electron microscopy with energy dispersive spectroscopy(TEM-EDS) in the workplace. Results: The monitoring revealed that the concentration of VOCs and metals generated during the 3D printing process was low. However, it also revealed that within the 3D printing area, the highest concentration of total volatile organic compounds(TVOC) was 4,164 ppb at the vat photopolymerization 3D printing workplace, and the lowest was 148 ppb at the material extrusion 3D printing workplace. For the metals monitoring, chromium, which, is carcinogenic for humans, was detected in the workplace. As a characteristic of the particles, nano-sized particles were also found during the monitoring, but most of them were agglomerated with large and small particles. Conclusions: Based on the monitoring conducted at the commercial 3D printing operation, the results revealed that the concentration of VOCs and metals in the workplace were within Korea's occupational exposure limits. However, due to the emission of nano-sized particles during 3D printing operations, it was recommended that the exposure to VOCs and metals in the workplace should be minimized out of concern for workers' health. It was also shown that the characteristics of particles emitted from 3D printing operations may spread widely within an indoor workplace.