• 복식
• /
• 제65권8호
• /
• pp.22-34
• /
• 2015

This study was intended to investigate the influences of consumer's self-monitoring, pioneer brand awareness, types of endorsers on quality perception of "me-too" brands with a focus on outdoor brands. The design of this research was comprised of 2 types of self-monitoring(high vs. low), 2 types of pioneer brand awareness(high vs. low), 2 types of endorsers(professional expert vs. typical consumer). The study was carried out by using samples from residents of Seoul and Gyeonggi area. The number of subjects used in the final analysis totaled 243, with age of the consumers ranging grom 20's to 50's. The results of this study were as follows. Self-monitoring, pioneer brand awareness and types of endorsers had shown a statistically significant correlation effect on the quality perception of me-too brands. Especially, in the high-level self-monitoring group, the effect of pioneer brand awareness on quality perception of me-too brand was significant when typical consumer model was given. The result presents that using a professional expert model in the market rather than a typical consumer model can offset the quality perception of pioneer brand with low awareness.

• Journal of Biosystems Engineering
• /
• 제41권4호
• /
• pp.396-407
• /
• 2016

Background: Although hyperspectral imaging was originally introduced for military, remote sensing, and astrophysics applications, the use of analytical hyperspectral imaging techniques has been expanded to include monitoring of agricultural crops and commodities due to the broad range and highly specific and sensitive spectral information that can be acquired. Combining hyperspectral imaging with remote sensing expands the range of targets that can be analyzed. Results: Hyperspectral imaging technology can rapidly provide data suitable for monitoring a wide range of plant conditions such as plant stress, nitrogen status, infections, maturity index, and weed discrimination very rapidly, and its use in remote sensing allows for fast spatial coverage. Conclusions: This paper reviews current research on and potential applications of hyperspectral imaging and remote sensing for outdoor field monitoring of agricultural crops. The instrumentation and the fundamental concepts and approaches of hyperspectral imaging and remote sensing for agriculture are presented, along with more recent developments in agricultural monitoring applications. Also discussed are the challenges and limitations of outdoor applications of hyperspectral imaging technology such as illumination conditions and variations due to leaf and plant orientation.

• International journal of advanced smart convergence
• /
• 제9권1호
• /
• pp.63-69
• /
• 2020

The rapid development in modern industrialization pollutant the water and atmospheric air across the globe that have a major impact on the human and livings health. In worldwide, every country government increasing the importance to improve the outdoor air pollution monitoring and control to provide quality of life and prevent the citizens and livings life from hazard disease. We proposed the environmental dust level detection method for outdoor facilities using sensor fusion technology to measure precise micro-dust level and monitor in realtime. In this proposed approach use the camera sensor and commercial dust level sensor data to predict the micro-dust level with data fusion method. The camera sensor based dust level detection uses the optical flow based machine learning method to detect the dust level and then fused with commercial dust level sensor data to predict the precise micro-dust level of the outdoor facilities and send the dust level informations to the outdoor air pollution monitoring system. The proposed method implemented on raspberry pi based open-source hardware with Internet-of-Things (IoT) framework and evaluated the performance of the system in realtime. The experimental results confirm that the proposed micro-dust level detection is precise and reliable in sensing the air dust and pollution, which helps to indicate the change in the air pollution more precisely than the commercial sensor based method in some extent.

• 산업공학
• /
• 제25권1호
• /
• pp.114-126
• /
• 2012

This study describes a real-time location monitoring system developed for efficient operation of workplace in plant equipment maker. This monitoring system can be applied for indoor and outdoor working environment respectively. By using the real-time tracking system based on RTLS, it is possible to track worker's movement and location of working object under indoor working environment. For outdoor working environment, the real-time monitoring system based on IDGPS is applied for work safety and balanced workload. A case study is provided to evaluate the performance of the real-time monitoring system.

• 설비공학논문집
• /
• 제27권4호
• /
• pp.179-186
• /
• 2015

In this study, the actual energy consumption of the secondary side District Heating System (DHS) with different hot water supply temperature control methods is compared. The two methods are Outdoor Temperature Reset Control and Outdoor Temperature Predictive Control. While Outdoor Temperature Reset Control has been widely used for energy savings of the secondary side system, the results show that the Outdoor Temperature Predictive Control method saves more energy. In general, the Outdoor Temperature Predictive Control method lowers the supply temperature of hot water, and it reduces standby losses and increases the overall heat transfer value of heated spaces due to more flow into the space. During actual energy consumption monitoring, the Outdoor Temperature predictive Control method saves about 6.6% of energy when compared to the Outdoor Temperature Reset Control method. Also, it is found that at partial load condition, such as during daytime, the fluctuation of hot water supply temperature with Outdoor Temperature Reset Control is more severe than that with Outdoor Temperature Predictive Control. Thus, it proves that Outdoor Temperature Predictive Control is more stable even at partial load conditions.

• Fisheries and Aquatic Sciences
• /
• 제26권11호
• /
• pp.660-668
• /
• 2023

This study aimed to investigate the growth performance of far eastern catfish (Silurus asotus) on outdoor fish farms to obtain basic data for the domestic eastern catfish aquaculture industry. An outdoor fish farm was directly monitored from June 2018 to October 2019 to determine the farming conditions, growth performance, and water quality. The growth performance in 2017 was analyzed using data from the same fish farm. Three years of monitoring showed that the fish farm required approximately 5-6 months between stocking, harvesting, and selling an S. asotus batch. The growth parameters, namely, the weight gain rate (WGR), specific growth rate (SGR) for culture periods, SGR for feeding periods, and feed coefficient rate (FCR), were 4,664.7%, 1.27%, 2.43%, and 1.25 in 2017; 6,452.0%, 1.52%, 2.79%, and 1.42 in 2018; and 3,270.0%, 1.11%, 2.12%, and 1.38 in 2019, respectively. Moreover, the WGR was two-fold higher in 2018 than 2019, whereas the FCR was more effective in 2019 than 2018, presumably because of the stocking density. No mass mortality was observed during the water quality analysis. The results of this study provide basic data for the development of the catfish industry.

• 한국전자통신학회논문지
• /
• 제7권2호
• /
• pp.425-431
• /
• 2012

로봇의 실외 주행의 경우 실내 주행과 달리 실외 환경 전체에 대한 지도를 미리 작성할 수 없어 대부분 GPS를 이용하고 있으며 지도에 기반한 연구는 거의 없는 상황이다. 본 논문에서는 경사 구간이 없는 2차원 평면의 실외환경에서 정밀 GPS를 사용하여 GPS 데이터를 MCL 알고리즘에 적용하여 실외 로봇 위치 추정을 구현하고, 이를 적용하여 간단한 임무 시나리오를 수행하였다. 그리고 미들웨어 기반의 OpenRTM을 적용하여 관리자가 서버를 통해 원격으로 로봇을 제어하거나 상황을 관제할 수 있도록 하였다.

• Structural Monitoring and Maintenance
• /
• 제7권1호
• /
• pp.1-12
• /
• 2020

Railway tracks are the direct supporting structures of the trains, which are vulnerable to produce large deformation under the temperature stress or subgrade settlement. The health status of track is critical, and the track should be routinely monitored to improve safety, lower the risk of excess deformation and provide reliable maintenance strategy. In this paper, the distributed optical fiber sensor was proposed to monitor the continuous deformation of the track. In order to validate the feasibility of the monitoring method, two deformation monitoring tests on one steel rail model in laboratory and on one real railway tack in outdoor were conducted respectively. In the model test, the working conditions of simply supported beam and continuous beam in the rail model under several concentrated loads were set to simulate different stress conditions of the real rail, respectively. In order to evaluate the monitoring accuracy, one distributed optical fiber sensor and one fiber Bragg grating (FBG) sensor were installed on the lower surface of the rail model, the strain measured by FBG sensor and the strain calculated from FEA were taken as measurement references. The model test results show that the strain measured by distributed optical fiber sensor has a good agreement with those measured by FBG sensor and FEA. In the outdoor test, the real track suffered from displacement and temperature loads. The distributed optical fiber sensor installed on the rail can monitor the corresponding strain and temperature with a good accuracy.

• 설비공학논문집
• /
• 제27권3호
• /
• pp.137-145
• /
• 2015

In this study, the actual energy consumption of the secondary side of District Heating System (DHS) with different hot water supply temperature control methods are compared. Three methods are Set-point Control, Outdoor Temperature Reset Control and Outdoor Temperature Prediction Control. While Outdoor Temperature Reset Control has been widely used for energy savings of the secondary side of the system, the results show that Outdoor Temperature Prediction Control method saves more energy. In general, Outdoor Temperature Prediction Control method lowers the supply temperature of hot water, and it reduces standby losses and increases overall heat transfer value of heated spaces due to more flow into the space. During actual energy consumption monitoring, Outdoor Temperature Prediction Control method saves about 7.1% in comparison to Outdoor Temperature Reset Control method and about 15.7% in comparison to Set-point Control method. Also, it is found that at when partial load condition, such as daytime, the fluctuation of hot water supply temperature with Set-point Control is more severe than Outdoor Temperature Prediction Control. Therefore, it proves that Outdoor Temperature Prediction Control is more stable even at the partial load conditions.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권6호
• /
• pp.3104-3120
• /
• 2017

The intelligent monitoring system has been successfully applied in many fields such as: monitoring of production lines, transportation, etc. Smart surveillance systems have been developed and proven effective in some specific areas such as monitoring of human activity, traffic, etc. Most of critical application monitoring systems involve object tracking as one of the key steps. However, task of tracking of moving object is not easy. In this paper, the authors propose a method to implement human object tracking in outdoor environment based on human features in shearlet domain. The proposed method uses shearlet transform which combines the human features with context-sensitiveness in order to improve the accuracy of human tracking. The proposed algorithm not only improves the edge accuracy, but also reduces wrong positions of the object between the frames. The authors validated the proposed method by calculating Euclidean distance and Mahalanobis distance values between centre of actual object and centre of tracked object, and it has been found that the proposed method gives better result than the other recent available methods.