• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.7
• /
• pp.620-628
• /
• 2010

Using the responses of deck plate, a new bridge weigh-in-motion system has been introduced. The approach includes not only a systematic algorithm for the extraction of moment influence sequence but also a sensitivity-based system identification technique. The algorithm indentifies the influence sequence, the axle loads, and axle location of moving vehicles on a bridge, simultaneously. The accuracy and practicability of the algorithm have been examined experimentally for a folded deck plate on Yongjong Grand suspension bridge. It turns out that the two-dimensional effects of the behavior of deck plate should be considered for further accuracy improvement.

• Structural Engineering and Mechanics
• /
• v.45 no.5
• /
• pp.703-722
• /
• 2013

In this paper a study about concrete arch bridges built by lattice cantilevers is presented. Lattice cantilevers are partial structures composed of deck, arch, piers and provisional steel diagonals, organized as reticular cantilever girders, in order to build arch bridges without the use of centrings, supports or temporary towers. Characteristics of this construction methodology with its variants are explained together with their implications in the erection sequence. Partial elastic scheme method is implemented in order to find initial forces of temporary cables and a forward analysis is carried out to follow the actual sequence of construction, by extending a procedure already applied to concrete cable-stayed bridges and to arches built by the classical suspended cantilever method. A numerical application on a case-study of a concrete arch bridge is performed together with a comparison between different methodologies followed for its construction sequence. Differences between erection by lattice cantilevers and cable-stayed cantilevers, are discussed. Results can be useful for designers in conceptual design of concrete arch bridges.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.3 no.2
• /
• pp.205-212
• /
• 1999

Recently, unexpected cracks in the concrete deck slab of composite steel bridges have been widely reported at an early age of concrete placing due to the concrete placing sequence and methods. Accordingly, the analytical research was carried out to verify the negative moment at an internal supports due to the several concrete pouring sequence and to determine the reasonable concrete placing method on the deck slab of composite steel bridge. The results show that the conventional concrete-placing method, which pours concrete first on the positive moment regions and then negative regions, leads to the minimum moment at an internal supports. However, the conventional method produces two impractical construction joints on every spans and makes field engineer to pour concrete continuously. In conclusion, this concrete-placing method was verified to be reasonable only when the construction joint was placed at the $\frac{5}{8}l{\sim}\frac{6}{8}l$ location of the middle span.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.3
• /
• pp.61-67
• /
• 2008

Proxy MIPv6 (PMIPv6) is that network-based mobility management protocol that network supports mobile node's mobility on behalf of the MN. In PMIPv6, when two MNs located within the same PMIPv6 domain want to communicate each other, sub-optimal path is established between the two MN. Route optimization method for PMIPv6 is proposed to resolve the problem. However, the method still suffer from the performance degradation due to out-of-sequence packet problem. In this paper, we propose the route optimization mechanism in PMIPv6 based on Flush message to resolve the out-of-sequence packet problem. The proposed mechanism is evaluated by performing simulations, and the simulation results show that the proposed one gives better performance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.5
• /
• pp.919-925
• /
• 2006

Mobile IPv6 generates the loss of packets and out of sequencing when hand off, In this paper, We propose a improved hand off techniques using the mobility pattern of mobile nodes. As making group by presetting the moving range of mobile nodes, and putting buffer server in the group, the packet loss and out of packet sequence can be reduced. The proposed method prevents the out of packet sequence in If level which can be happened in the stable state, minimizes the packet re-send in TCP level. In the simulation, the proposed hand off techniques transmits packets efficiently by using the mobility pattern of mobile nodes.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.33 no.6
• /
• pp.238-245
• /
• 2021

In this study, we carried out case study to predict dissolved oxygen (DO) concentration of Nakdong river estuary with LSTM model. we aimed to figure out a optimal model condition and appropriate predictor for prediction in dissolved oxygen concentration with model parameter and predictor as cases. Model parameter case study results showed that Epoch = 300 and Sequence length = 1 showed higher accuracy than other conditions. In predictor case study, it was highest accuracy where DO and Temperature were used as a predictor, it was caused by high correlation between DO concentration and Temperature. From above results, we figured out an appropriate model condition and predictor for prediction in DO concentration of Nakdong river estuary.

• BMB Reports
• /
• v.39 no.5
• /
• pp.578-585
• /
• 2006

The cDNA of a firefly luciferase from lantern mRNA of Lampyroidea maculata has been cloned, sequenced and functionally expressed. The cDNA has an open reading frame of 1647 bp and codes for a 548-residue-long polypeptide. Noteworthy, sequence comparison as well as homology modeling showed the highest degree of similarity with H. unmunsana and L. mingrelica luciferases, suggesting a close phylogenetic relationship despite the geographical distance separation. The deduced amino acid sequence of the luciferase gene of firefly L. maculata showed 93% identity to H. unmunsana. Superposition of the three-dimensional model of L. maculata luciferase (generated by homology modeling) and three dimensional structure of Photinus pyralis luciferase revealed that the spatial arrangements of Luciferin and ATP-binding residues are very similar. Putative signature of AMP-binding domain among the various firefly species and Lampyroidea maculata was compared and a striking similarity was found. Different motifs and sites have been identified in Lampyroidea maculata by sequence analysis. Expression and purification of luciferase from Lampyroidea maculata was carried out using Ni-NTA Sepharose. Bioluminescence emission spectrum was similar to Photinus pyralis luciferase.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.32 no.3
• /
• pp.65-74
• /
• 2000

This study was carried out to acquire basic data necessary for the use of rice-straw chemical pulp. It investigated the proper bleaching conditions when rice-straw chemical pulps(alkaline sulfite-Na2S2O4 pulp) were bleached with the various kinds of bleaching agents. And physical properties of bleached pulps were tested. The results of this study were as follows; 1, The proper conditions of chlorine sequence were determined to be 4% concentration of chlorine 25$^{\circ}C$ of reaction temperature and 50 minutes of reaction time. 2. For calcium hypochlorite sequence the proper conditions of chemical concentration reac-tion temperature and reaction time were 3% 25$^{\circ}C$ and 20 minutes respectively. 3. For chlorine dioxide sequence the proper conditions were 1% concentration of chlorine dioxide 70$^{\circ}C$ of reaction temperature and 2hr. of reaction time. 4. The proper conditions of hydrogen peroxide sequence were 1.5% concentration of hydro-gen peroxide 70$^{\circ}C$ of reaction temperature and 1hr. of reaction time respectively. 5. When the rice-straw chemical pulp were bleached with four kinds of bleaching agents methioned above in the proper conditions respectively brightnesses were the order of chlorine dioxide calcium hypochlorite, chlorine, hydrogen peroxide. And strengthes of pulps bleached with chlorine dioxide and hydrogen peroxide were higher than those of pulps bleached with other bleaching agents.

• Korean Institute of Interior Design Journal
• /
• v.15 no.6 s.59
• /
• pp.35-42
• /
• 2006

'Place' as the spacial concept became now key concept in the environments and architecture from the mid 20th century. The purpose of this study is to explain the placeness in Aldo Rossi's architecture according to space sequence. Aldo Rossi has attempted to apply the typological elements for the restoration of place in the cites and buildings which had ruined by modem architecture. Therefore It would be important for us to find out a method which making placeness in Aldo Rossi's architecture. Experiencing place could be examined by the method of space sequence. The experience of place is related to the experience of the human body in architecture space. The experience of place in space can make a unique placeness of architect. And, the experience of the place through the movement of the body and the vista, is the key elements of space sequence to explain the placeness in architecture. The results of this research are following. (1)Key space which related to movement of human body in Aldo Rossi's architecture make a set consisted of a goal space and the surrounding space. (2)The Arrange of Space and the formation of the boundary is more complex in the dispersed buildings than that of the single building. (3)The typological elements like a courtyard, a cylinder and the axis in the buildings made the goal space and helping people to find the orientation of human body.

• Journal of Microbiology
• /
• v.33 no.2
• /
• pp.136-141
• /
• 1995

From a cluster of structural rRNA genes which has previsouly been cloned (Hwang and Kim, in submission; J. Microbiol. Biotechnol.), a 1.0-kb Eco RI fragment of DNA which shows significant homology to the 25S and rRNA s of Tricholoma matsutake was used for sequence analysis. Nucleotide sequence was bidirectionally determined using delection series of the DNA fragment. Comparing the resultant 1016-base sequence with sequences in the database, both the 3'end of 25S-rRNA gene and 5S rRNA gene were searched. The 5S rRNA gene is 118-bp in length and is located 158-bp downstream of 3'end of the 25S rRNA gene. IGSI and IGS2 (partial) sequences are also contained in the fragment. Multiple alignment of the 5S rRNA sequences was carried out with 5S rRNA sequences from some members of the subdivision Basidiomycotina obtained from the database. Polygenetic analysis with distance matrix established by Kimura's 2-parameter method and phylogenetic tree by UPGMA method proposed that T. matsutake is closely related to efibulobasidium allbescens. Secondary structure of 5S rRNA was also hypothesized to show similar topology with its generally accepted eukaryotic counterpart.