• Geomechanics and Engineering
• /
• 제5권6호
• /
• pp.565-574
• /
• 2013

Extensive study was carried out on Clay expansive soil. This soil was silty clay and can be classified as CH. The degree of expansion was found to range from low to medium depending on the free swell and swell pressure tests. The research investigated the effect of using cement dust on swelling potential, Atterberg Limit, linear shrinkage, and mineralogical composition of expansive soil. The results showed that the swelling potential, plasticity index, linear shrinkage, and clay minerals decrease with increasing cement dust percentage. The cement dust accumulates in huge amounts as a side product in cement factories, and the disposal of this fine dust is very difficult and poses an environmental threat.

• 국제학술발표논문집
• /
• The 7th International Conference on Construction Engineering and Project Management Summit Forum on Sustainable Construction and Management
• /
• pp.297-300
• /
• 2017

Particulate Matter(PM) is one of the most critical pollutant which can cause a fatal disease if the human body inhales. Construction is the business that emits the most fugitive dust. It is therefore necessary to manage construction site. South korea government focuses on the fugitive dust control measures defined in regulation being implemented properly. However the number of civil complaints related to fugitive dust emitted from construction site is the most in korea. So it is necessary to check from the management system aspect. This paper compares and analyzes the fugitive dust management system which applied to the construction site of major cities in three countries, and finds out what needs to be supplemented by the domestic management system.

• 대한원격탐사학회지
• /
• 제19권3호
• /
• pp.223-231
• /
• 2003

With the negative influences and damage from Asian dust increasing, it's getting important to investigate the climate and soil condition of the source region of Asian dust. There is a high possibility that the desertification and the drastic decrease of plants in China and Mongolia make worse the situation (bad effects of Asian Dust). To detect the movement of Asian dust caused by air circulation, we need to watch the state of the source region to get useful information for the prevention of the dust pollution, and to predict what part of China will become the source region. Therefore, using TOMS aerosol index data, NCEP reanalysis data that is Remote Sensing data from 1981 to 2000 (except 1993~1996, 4 years), for 16 years, examined the relation between the dust occurrence and weather elements. Dust occurrence appeared much in spring season from March to May in study areas. It had a dry climate during that season as follows : relative humidity about 20~40%, temperature about -5~5$^{\circ}C$, precipitation about 33-180 mm, wind speed about 4-10 ms-1. Dust occurrence and weather element annual change in study areas decreased gradually till 1990, but in Gobi desert the incidence of dust occurrence increased since 1997. As a result, found out that the more the precipitation, the less dust occurrence, because the precipitation and surface wind speed had a direct influence on the soil of the source region of dust.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.231-232
• /
• 2021

This study intended to verify the alkali activation effect of concrete by replacing FA and CBS-Dust with cement to find out how to utilize CBS-Dust generated during cement production. Experiments result shows that air flow and liquidity can be secured when CBS-Dust is replaced by 5% in FA 20%, and that relatively high compressive strength is expressed in the initial age of 3 days and 7 days and long-term age of 91 days.

• 대기
• /
• 제20권3호
• /
• pp.273-286
• /
• 2010

The northeast part of China(hereafter Manchuria) is one of Asian dust source regions along with Gobi, Inner Mongolia and Loess Plateau. In this study, a geographical survey over the area was carried out to determine its soil characteristics in June 2009. It revealed that some parts of the area, especially near Keerchin desert, consist of alkali clay soil mixed up with sand. Manchuria, where is a vast cornfield, can be a potential source region of Asian dust from fall to following spring after harvesting. The frequency of Asian dust over the region from 1996 to 2009 was examined using 3-hourly GTS SYNOP data and it showed that the occurrence of Asian dust over the region is high in the springtime. It was also revealed that snow cover is the key parameter affecting on the frequency through the analysis of NCEP reanalysis data. To scrutinize the path and structure of Asian dust from Manchuria, the event on 3~4 April 2008 and 25 January 2010 were intensively investigated with regard to features of synoptic weather patterns, satellite imagery, airstream, naked eye-observations, concentrations of PM10, 2.5 and 1.0. For this case, the Asian dust from the area reached to Korea less than a day. However, the duration time of the dust in Korea was short (< 7 hours). The average of hourly PM10 reached up to $340{\mu}g/m^{3}$ at Baengnyeondo during the period. The high PM2.5 and PM1.0 concentrations were also observed at several sites in Korea, indicating that air pollutants could be transported along with the dust.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제15권3호
• /
• pp.52-60
• /
• 2010

The stone-dust is an unavoidable by-product of aggregate production, which is produced about 0.8~1.0 million $m^3$ annually. The stone-dust is currently regarded as a hazard material on environment because it is classified as an industrial waste in the Waste Management Law of Korea. At present, the stone-dust is considered as a environmentally hazardous material, and is classified as an industrial waste according to the Waste Management Law of Korea. In this study, we assessed the heavy-metal contamination of the stone-dust on surrounding environments by various leaching tests. Leaching experiments (such as Korea Standard Leaching Procedure (KSLP), Soil Environment Preservation Act of Korea (SEPAK), Toxicity Characteristic Leaching Procedure (TCLP), and Synthetic Precipitation Leaching Procedure (SPLP)) show that very low heavy metals (As, Cd, Cu, Pb, Zn, Hg) and CN are leached out, or much less than each regulatory thresholds. The resuts of the leaching test with time in acidic solution (initial pH 5 and 3) indicate that pH-buffering minerals are present in the stone-dust. These results suggest that the stone-dust can not potentially affect adverse impact on surrounding environments such as surface water, groundwater and soil etc..

• 한국기계가공학회지
• /
• 제20권3호
• /
• pp.47-52
• /
• 2021

Fine dust generated from vehicle brakes accounts for a significant amount of fine dust from non-exhaust system. Since such brake fine dust contains a large number of heavy metal components that are fatal to the human body, a device capable of collecting them needs to be developed. A mini cyclone, one of the devices that can effectively collect fine dust, has the advantage of relatively simple shape and high collection efficiency. Therefore, in this study, the collection efficiency of the mini-cyclone was numerically analyzed using CFD in order to find out whether such a mini-cyclone is suitable for collecting brake fine dust. As a result, the cut-off diameter was predicted to be about 1.5㎛, which means that the particle trapping load of the filter can be drastically reduced. Therefore, there is a possibility that the mini-cyclone can be used to collect fine dust from disc brakes.

• 천문학회보
• /
• 제42권2호
• /
• pp.48.3-49
• /
• 2017

Interplanetary space of the solar system contains a large number of dust particles, referred to as Interplanetary Dust Particles (IDPs) cloud complex. They are observable through meteors and zodiacal lights. The relative contribution of possible sources to the IDPs cloud complex was an controversial topic, however, recent research (Yang & Ishiguro, 2015 and references therein) suggested a dominance of cometary origin. In this study, we numerically investigated the orbital evolution of cometary dust particles, with special concerns on different evolutionary tracks and its consequences according to initial orbits, size and particle shape. The effect of dust particle density and initial size-frequency distribution (SFD) were not decisive in total cloud complex mass and mass supply rate, when these physical quantities are confined by observed zodiacal light brightness and dust particle SFD at 1 au. We noticed that, if we assume the existence of fluffy aggregates discovered in the Earth's stratosphere and the coma of 67P/Churyumov-Gerasimenko, the required mass supply rate decreases significantly. We also found out that close encounters with planets (mostly Jupiter) are the dominating factor of the orbital evolution of dust particles, as the result, the lifetime of cometary dust particles are shorter than Poynting-Robertson lifetime (around 250 thousand years). As another consequence of severe close encounters, only a small fraction of cometary dust particles can be transferred into the orbit < 1 au. This effect is significant for large size particles of ${\beta}$ < 0.01. The exceptional cases are dust particles ejected from 2P/Encke and active asteroids. Because they rarely encounter with Jupiter, most dust particles ejected from those objects are governed by Poynting-Robertson effect and well transferred into the orbits of small semimajor axis. In consideration of the above effects, we directly estimated probability of mutual collisions between dust particles and concluded that mutual collisions in the IDPs cloud complex is mostly ignorable, except for the case of large sized particles from active asteroids.

• 한국의류학회지
• /
• 제26권2호
• /
• pp.337-348
• /
• 2002

Based upon literature survey and questionnaire survey, this research tries to develop four new Cleanroom Garment in semiconductor industrial environment. The designs emphasize to minimize workers disconmfort so that they can not only cover human body fully but also reduce dust as much as possible during work hour in clean room. The new designs characteristics and results from both function test and dust emission test are as follows: 1. In order to reduce dust-emission, we develop new designs with hood, kimono sleeve, and back zipper. The designs with hood face positive test results in term of motion suitability and dust-omission. The design with seam in front, in particular, is effective to control dust-emission. 2. For the purpose of reducing dust-emission, we also emphasize to minimize ease of dust-proof wear, with reference to previous research and clothing experiment. The experiment participants report that the new wears are not so comfortable as existing ones, but they accept the new wears positive as effective in reducing dust-emission owing to reduced ease of Cleanroom Garment and sleeves. 3. A1so to reduce dust-emission in inner wear, we put inner wear in both Cleanroom Garments and inner wear, resulting to remove discomfort of wearers when changing clothes and of tight waist due to inner-trousers. 4. We develop new designs with elastic bands in both waist through the side lines and with velcro only at the back side. To remove twist in front contributes to reduce emission arising out of friction, also to free the appearance minding woman workers from worrying about exposed stomach. The new designs need to be accepted as a valuable alternative of Cleanroom Garment, in that they are highly effective to reduce dust-emission, which is the most important factor in the wear, in spite of some drawbacks in terms of motion-suitability, ease and appearance as shown in wearing test.

• 한국환경보건학회지
• /
• 제45권6호
• /
• pp.630-637
• /
• 2019

Objectives: This study was performed to evaluate the secular changes in indoor airborne dust or endotoxin levels in the dust from swine confinement buildings. Indoor levels were compared with the level at the exhaust outlet in order to examine the contribution potential of indoor dust to nearby ambient air dust. Methods: Comparisons were made on inhalable and respirable dust levels reported in 2002, 2012, and 2017 from 14, 10, and 36 swine fattening confinement buildings in Korea, respectively. This data was produced by the same research group. Levels of endotoxin adsorbed into inhalable or respirable dust were also compared. Samples of inhalable or respirable dust were collected indoors and at exhaust outlets from 17 swine fattening confinement buildings in 2019, and dust levels were compared between the indoor and the outlet. Results: The outlet inhalable dust level (0.111 mg/㎥) was approximately 19% of that from indoors, and the respirable dust level (0.033 mg/㎥) was approximately 74% of that from indoors. The outlet respirable dust levels were lower than the airborne fine dust levels in the towns where those farms are located. No significant difference was observed in the inhalable dust levels among the years examined, but the respirable dust level in 2017 (0.143 mg/㎥) was significantly lower than in 2002 (0.328 mg/㎥). The level of endotoxin in inhalable dust was significantly higher in 2017 (722 EU/㎥) than in both 2002 (75 EU/㎥) and 2012 (171 EU/㎥). Conclusion: Even though no apparent contribution from swine farm indoor dust to nearby ambient air dust was observed in terms of amount, a certain control strategy to reduce the production of airborne dust and endotoxin from swine farms is merited.