• Journal of Astronomy and Space Sciences
• /
• 제12권1호
• /
• pp.1-13
• /
• 1995

We carried out photometric and spectroscopic observatious of the blue compact dwarf galaxy Haro 6 in the Virgo Cluster of Galaxies. The long-slit spectroscopy was employed at three position angles, $\Phi$=$0^{\circ}$, $\Phi$=$30^{\circ}$, and $\Phi$=$120^{\circ}$with CCD camera mounted on the Cassegrain Spectrograph. Based on the mean intrinsic axial ratio < $q_0$ >=0.3, we derived inclination I of the system as $44^{\circ}$using our composite V-band CCD image. Careful analysis on the velocity field of the system shows an asymptotically fiat rotation curve with the maximum rotational velocity $V(r)_{max}$ reaches about 12km/sec. The calculation of the dynamical mass of Haro 6 with a simple mass model is briefly discussed with emphasis on the mass to luminosity ratio. From the IRAS Point Source Cataloque, we derived dust-to-gas ratio which indicates relatively low dust content, thus tempting us to conjecture the youth of the system.

• 한국유기농업학회지
• /
• 제19권spc호
• /
• pp.234-237
• /
• 2011

This study was carried out to investigate the effect of soil covering materials such as rice bran, rice hull and saw dust on garlic growth through a field experiment in wintertime. Rice bran was the smallest in term of particle size, but it recorded the highest level of bulk density. The missing plant rate after winter season was relatively high, 59.3%, and that of soil covering materials stood at the low level of 10%. Other growth factors recorded the highest level during application of rice bran. In terms of chemical properties of soil-covering materials, rice bran recorded the highest level of 1.84, 2.34 and 0.16% in the content of N, P, and K, respectively. The subsoil temperature was higher by application of rice bran as compared to that of other materials which stood at the lowest temperature ($-9^{\circ}C$).

• Advances in materials Research
• /
• 제5권3호
• /
• pp.171-179
• /
• 2016

Fusion and characterization of bisphenol-A diglycidyl ether based thermosetting polymer mortars containing an epoxy resin, Fly ash and Rock sand are presented here for the Experimental study. The specimens have been prepared by means of an innovative process, in mild conditions, of commercial epoxy resin, Fly ash and Rock sand based paste. In this way, thermosetting based hybrid mortars characterized by a different content of normalized Fly ash and Rock sand by a homogeneous dispersion of the resin have been obtained. Once hardened, these new composite materials show improved compressive strength and toughness in respect to both the Fly ash and the Rock sand pastes since the Resin provides a more cohesive microstructure, with a reduced amount of micro cracks. The micro structural characterization allows pointing out the presence of an Interfacial Transition Zone similar to that observed in cement based mortars. A correlation between micro-structural features and mechanical properties of the mortar has also been studied.

• 한국동물위생학회지
• /
• 제21권1호
• /
• pp.41-56
• /
• 1998

These experiment was carried out to investigate the pulmonary lesions and the function of alveolar macrophages in rats exposed to cement dusts. 1. The number of total cells in bronchoalveolar lavage fluid(BAL) increased remarkably in 1st month. As time goes by, tend to less and less in numbers. 2. The number of neutrophil and lymphocytes obtaining from the total cell of BAL increased remarkably in first month, but as time goes by, they tended to grow less and less in number. Macrophages decreased gradually after being temporarily augmentation. 3. Histipathologically, the thickening of alveolar walls, alveolar interstitial, and infiltrated macrophages containing cement dusts.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.242-243
• /
• 2019

In recent years, road cutting work has been frequently performed for the repair of old road pavement and the development of underground space. However, the existing pavement cutting machine in Korea generates a lot of noise and dust. In this study, it was found out that the pavement cutting machine that cuts off noise and sucks cutting dust is used in overseas. Therefore, in this study, the concept of eco - friendly pavement cutter suitable for domestic situation is derived. The results will be used in prototype modeling and experimentation.

• 한국농공학회지
• /
• 제39권2호
• /
• pp.44-50
• /
• 1997

Permeable polymer concrete can be applied to roads, sidewalks, river embankment, drain pipes, conduits, retaining walls, yards, parking lots, plazas, interlocking blocks, etc.. This study was to explore a possibility of using stone dust and heavy calcium carbonate as fillers for the permeable polymer concrete. Different mixing pro-portions were tried to find an optimum mixing proportion of the permeable polymer concrete. The tests were carried out at 20 f 1 t and 60 ${\pm}$ 2% relative humidity. At 7 days of curing, compressive, flexural and splitting tensile strengths and water permeability ranged between 209~246kgf/cm$^2$, 101 ~ l2lkgf/cm$^2$, 36~52kgf/cm$^2$ and 3.076 ~ 4.390L/cm$^3\;^2$/hr, respectively. It was concluded that the stone dust and heavy calcium carbonate could be used in the permeable polymer concrete.

• 한국세라믹학회지
• /
• 제19권1호
• /
• pp.44-50
• /
• 1982

Drawing optical fibers in a graphite furnace is one of the most convenient and economical means of producing optical fiber. Since the flaw formation on optical fiber is mainly due to dust contaminations during drawing and surface corrosion by water vapor penetration through coating layer, the tensile strength of optical fiber drawn in a graphite furnace is greatly inflenced by the drawing conditions. The important factors found in this investigation were preform treatment (fire polishing), furnace interior environment (dust contamination, inert gas flows), primary coating condition (resin curing temperature, coating materials, method, thickness) and fiber pulling condition (furnace temperature, drawing speed, pulling tension). The tensile strength at optimum drawing conditions turned out to be 5 ~ 6 GPa.

• 천문학논총
• /
• 제27권4호
• /
• pp.225-230
• /
• 2012

Supernovae (SN) and supernova remnants (SNRs) play a major role in the life-cycle of interstellar dusts. Fast shock waves generated by SN explosions sweep out the interstellar space destroying dust grains and modifying their physical and chemical properties. The dense, cooling SN ejecta, on the other hand, provide an environment for dusts to condense. Recent space-infrared telescopes have revealed the hidden universe related to these fascinating microscopic processes. In this paper, I introduce the results on stardusts in young core-collapse supernova remnants obtained by AKARI. The AKARI results show diverse infrared characteristics of stardusts associated with SNRs, implying diverse physical/chemical stellar structures and circumstellar environments at the time of explosion.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.469-472
• /
• 2008

This research suggest one-body type scrapped styrofoam crusher with sprayed air (or water), which at present separately composed of dust eliminator, air supplier and crusher. Air (or water) that supplied from compressor injected to rotating twin roller through axis hole, and sprayed out of fine hole on the surface. The crusher that manufactured with sprayed air (or water) can make high-quality primary styrofoam removed pollution and dust. In case of mixed sprayed air and water, clean degree of crushed styrofoam was higher than single sprayed air. This could be contributed to reduce environmental pollution, cost and space in standpoint of recycling scrapped styrofoam.

• Korean Chemical Engineering Research
• /
• 제44권2호
• /
• pp.136-148
• /
• 2006

주물공장에서는 주철을 녹여서 다양한 기계부품을 만든다. 다양한 기계부품을 만들기 위해 목형을 주물사에 넣은 후 주입구를 만들어 녹인 주철을 투입한다. 주물공장은 furan 공정을 포함해 많은 공정으로 이루어지며, 이 중 furan 공정은 목형에 주물사를 부어 넣는 공정이다. Furan 공정의 첫 단계는 주물사가 서로 엉겨 붙어 있게 하기 위해 접착성을 가지는 고분자 물질인 furan류를 주물사에 섞게 되고 녹은 주철이 목형으로 들어가는 것이며 고온에 의해 많은 유해 VOC류가 발생하게 된다. 또 공정조업에서 furan용 모래를 목형이 든 주물형틀에 부어 넣게 되고, 이때도 유독가스와 분진이 발생하게 되며 이 분진은 furan 물질을 포함하고 있어 조업자의 건강에 치명적인 요소가 되며, 이로 인해 조업기피현상이 심화되어 인력수급에 문제가 되고 나아가 사업 경영에 큰 걸림돌이 되고 있다. 본 연구는 이러한 조업기피의 원인을 제거하고 쾌적한 조업환경을 제공하기 위해 유해 VOC류와 집진을 동시에 수행할 수 있는 유해 VOC 및 분진 동시제거 시스템을 최적 설계하고 나아가 현장에 적용 설치하였다. 그 결과 설치 후 포름알데히드의 경우 VOC 0 ppm, 분진 $4{\mu}g/m^3$으로 조업환경이 개선되었으며, 조업자들의 조업 기피 요인을 해소하였다. 또한, 우리는 회사의 고용 문제를 해결하고, 작업의 생산성을 향상시킬 수 있었다.