• Journal of the Korean Graphic Arts Communication Society
• /
• v.25 no.2
• /
• pp.15-28
• /
• 2007

For the color offset printing, it starts with input of data. The past days, drum scanner or flat scanner used to input of data, but now it changes gradually into using of digital camera because digital camera become popular. The high quality digital camera saves as a data(RAW format), sRGB which have built in digital camera, or Adobe RGB format. sRGB of ICC(International Color Consortium) profile is a standard color gamut of digital camera. Distribution of color gamut in sRGB is less than Adobe RGB have a distribution in ICC profile. sRGB also can not be expressed in some specific part, because distribution of color gamut in sRGB is not able to cover all parts in ICC Profile of international standards CMYK. It is more popular to use Adobe RGB than sRGB to do high quality offset printing and software basis color setting in Europe and Japan. In spite of this data basis, there is a difficulty of doing color correction between the color proofing prints and the final prints. To see how the software color setting effects to RGB data, this thesis will use Gretag Macbeth ColorChecker 24 patch which has the most general natural color chart to compare sRGB and Adobe RGB to check the differences of color changes. It will use the several factors that came out from the process of making ICC Profile to figure out the optimum In-house profile. It also compares the differences of using matt paper and glossy paper to do best quality color proof offset printing, and how the Rendering Intent effects the proof print.

• Structural Engineering and Mechanics
• /
• v.91 no.3
• /
• pp.315-324
• /
• 2024

An expansive soil in 4970 special railway line in Dangyang City, China, has encountered a series of landslides due to the expansion characteristics of expansive soil over the past 50 years. Thereafter, a sheet-pile retaining structure was adopted to fortify the expansive soil slope after a comprehensive discussion. In order to evaluate the efficacy of engineering measure of sheet-pile retaining structure, the field test was carried out to investigate the lateral pressure and pile bending moment subjected to construction and service conditions, and the local daily rainfall was also recorded. It took more than 500 days to carry out the field investigation, and the general change laws of lateral pressure and pile bending moment versus local daily rainfall were obtained. The results show that the effect of rainfall on the moisture content of backfill behind the wall decreases with depth. The performance of sheet-pile retaining structure is sensitive to the intensity of rainfall. The arching effect is reduced significantly by employing a series of sheet behind piles. The lateral pressure behind the sheet exhibits a single-peak distribution. The turning point of the horizontal swelling pressure distribution is correlated with the self-weight pressure distribution of soil and the variation of soil moisture content. The measured pile bending moment is approximately 44% of the ultimate pile capacity, which indicates that the sheet-pile retaining structure is in a stable service condition with enough safety reserve.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.05a
• /
• pp.172-175
• /
• 2003

Run-Out-Table is the region between EDT and CT. Hot killed strip is cooled by air and water in ROT. In this procedure, phase transformation and shape deformation occur due to temperature drop. Because of un-ideal cooling condition, deformation of strip and non-uniform phase distribution come into existence. This phenomenon affects the strip property and lead th the existence of residual stress. And it exerts effects on the Coiling process, Coil Cooling process, and Un-coiling process. Through these process, the residual stresses of strip are more larger and unbalance of these stresses become more severe. Finite element (FE) based models for the analysises of non-steady state heat transfer and elastoplastic deformation are described in this investigation. The analysises of thermodynamics and phase transformation kinetics are suggested also. Using the ROT simulation result coiling process and coil cooling process simulations are carried out.

• Journal of the Society of Naval Architects of Korea
• /
• v.61 no.5
• /
• pp.378-388
• /
• 2024

Oil and gas contribute significantly to achieving the growing demand for energy, which is rising in parallel with population growth. The pipeline system is the main transport system used in the distribution of oil and gas because the pipeline system is considered the most effective and efficient system. The distribution system for gas and oil must guarantee security and safety. Analyzing the pipeline is necessary to ensure distribution security and safety. In this study, a finite element analysis of the gas pipeline specimen was conducted. This analysis is carried out in two stages, first structural analysis and continued with damage analysis, where the damage used is a dent. In the dent analysis, environmental conditions are applied, namely non-pressure, pressure, and full pressure. Then assessed all the results of the analysis of each stage, the assessment was carried out by verifying the results of the analysis with the applicable standard rules. So that the characteristics of the pipeline can be recognized and work accidents caused by operating pipeline failure can be avoided.

• Journal of Technologic Dentistry
• /
• v.8 no.1
• /
• pp.5-16
• /
• 1986

In order to provide the better and more effective dental health service, the study for manpower of dental laboratory technician with some relevant factors such as institutions for education and training, employment status and distribution of technicians, etc. was carried out through survey for 3,885 licensed technicians during 1965 - 1985. Results were obtained through the study as follows: 1. There are 14 junior health colleges in Korea and 3,106(79.9%) licensed dental technicians out of 3,885 graduated from health colleges and rest of them obtained their licenses through practical training in dental clinics. 2. 8,030 applicants have applied to the national examination which was carried out for 22 times during 1965 - 1985. The passing rate in the examination for 22 times showed 48.3% in average. 3. The dental technicians are working mostly in 404 dental laboratories and 2,522 dental clinics and hospitals through out the country. However, most technicians are dominantly working in large citis, because 255 (63.1%) dental laboratories and 1,537 (60.9%) dental clinics and hospitals are mainly located in Seoul and Busan. 4. Regarding distribution of the dental technician, 1,126(52.1%) technicians have been employed in the dental institutions, however, 530 (24.5%) could not have a job and the rest of them (504 technicians: 23.3%) were in leave absence from military service, travelling abroad and unknown reasons. 5. Through reference review, it was found that there were 95,886 dental technician (9/ 100,000 population) in the world during 1973$\sim$1977. However, 91,553 dental technicians lived in the developed countries (14/100,000 population)) also ratio between the dentist and the dental technician in the world showde 1:0.38. In such coentries where per capita income showed $100 in average, the distribution of the dental technician showed 0.272 per 100,000 population. 6. In an estimation of demand and supply for the dental technicians by the year from 1985 through 1996 in Korea, the supply is estimated by the capacity of educational institutions as over-production even through such estimation based on the future incresing of GNP and ratio between the dentist and the dental technicianas and also ratio between the dental technician and general population. At present such ratio shows less compared with the developed contries, however, it is estimated as over-supply in 1994.

• Korean Journal of Hydrosciences
• /
• v.3
• /
• pp.1-9
• /
• 1992

The effects of fractures in rock masses on the groundwater flow and the groundwater flow system in the volcanic rocks are analyzed by GFFP-WT model, which allows more realistic analysis of groundwater system by considering the fractures in rock masses. The evaluation of the effects of fractures in rock masses on the groundwater flow has been carried out in the 2nd Yeonwha and resulted in that the fractures mostly influence flow time because of hydraulic head distribution change. The results of the groundwater flow system analysis in the volcanic rocks are as follows. Most of groundwater once flowed in Lapilli tuff flowed out through Lappilli tuff layer. But only a small fraction of water flowed out through crystal tuff layer.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1736-1741
• /
• 2003

The characteristics plasma flow of an atmospheric plasma torch used for thermal plasma processing is studied. In general, it is produced by the arc-gas interactions between a cathode tip and an anode nozzle. The performance of non-transferred plasma torch is significantly dependent on jet flow characteristics out of the nozzle. In this work, the distribution of gas flow that goes out to the atmosphere through a plenum chamber and nozzle is analyzed to evaluate the performance of atmospheric plasma torch. Numerical analysis is carried out with various angles of an inlet flow which can create different swirl flow fields. Moreover, the size of plasma plume is experimentally depicted.

• Composites Research
• /
• v.28 no.5
• /
• pp.297-310
• /
• 2015

This study aims to develop efficient composite laminates for buckling load enhancement, interlaminar shear stress minimization, and weight reduction. This goal is achieved through cover-skin lay-ups around skins and stiffeners, which amplify bending stiffness and defer delamination by means of effective stress distribution. The design problem is formulated as multi-objective optimization that maximizes buckling load capability while minimizing both maximum out-of-plane shear stress and panel weight. For efficient optimization, response surface methodology is employed for buckling load, two out-of-plane shear stresses, and panel weight with respect to one ply thickness, six fiber orientations of a skin, and four stiffener heights. Numerical results show that skin-covered composite stiffened panels can be devised for maximum buckling load and minimum interlaminar shear stresses under compressive load. In addition, the effects of different material properties are investigated and compared. The obtained results reveal that the composite stiffened panel with Kevlar material is the most effective design.

• Journal of the Korean Society of Combustion
• /
• v.5 no.1
• /
• pp.99-108
• /
• 2000

Regenerative burner is a product of new combustion technology for realizing higher thermal efficiency and lower emissions, moreover utilizing very high preheated air temperature up to $1,000^{\circ}C$. In this study the experimental study was carried out to find out a combustion characteristics breaking the old combustion concept. From the variation of configuration of gas nozzle and hot test on the temperature distribution and NOx, CO, it was found out that the performance of regenerative burner was better than that of existing burner, mainly due to the effect of internal gas recirculation.

• Spatial Information Research
• /
• v.6 no.1
• /
• pp.11-23
• /
• 1998

Map generalization functions to visualize the spatial data or to change their scale by changing the level of details of data. Until recently, the studies on map generalization have concentrated more on line features than on point features. However, point features are one of the essential components of digital maps and cannnot be ignored because of the great amount of information they carry. This study, therefore, aimed to find out a detailed procedure of point features' generalization. Particularly, this work chose the distribution pattern of point features as the most important factor in the point generalization in investigating the geometric characteristics of source data. First, it attempted to find out the characteristics of distribution pattern of point features through quadrat analysis with Grieg-Smith method and nearest-neighbour analysis. It then generalized point features through the generalization threshold which did not alter the characteristics of distribution pattern and the removal of redudant point feautres. Therefore, the generalization procedure of point features provided by this work maintained the geometric characteristics as much as possible.