• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.50 no.2
• /
• pp.67-75
• /
• 2001

This paper presents a fast and effective methodology for service restoration in large-scale distribution systems. The service restoration problem is formulated as a constrained optimization problem and requires the fast computation time and superior solution because the more unfaulted out-of-service area should be restored as soon as possible. The proposed methodology is designed to consider the fast computation time and priority service restoration by dijkstra algorithm and fuzzy theory in large-scale distribution systems. Simulation results demonstrate the validity and effectiveness of the proposed on a 26-bus and 140-bus system.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.222-225
• /
• 1999

Degradation diagnosis of XLPE insulated URD cables was accomplished through out new method. which was to be analyzed non-electrical experiments and synthesized by degradation points. To supplement this method, it was also carried out using several electrical analyses. Breakdown voltages were measured and breakdown lifetimes were Predicted appling for Weibull distribution function. As a result, breakdown lifetime in failure cables was shorted up to 1/3 times than that in general cables. It was very available to estimate cable degradation using above method, but it needs further study on XLPE insulated URD cables in order to improve reliability.

• Proceedings of the KIEE Conference
• /
• 1998.07c
• /
• pp.1244-1246
• /
• 1998

This paper present a variety fault problem brought out with the multifunctional Battery Energy Storage System [MBESS] expected to be practical in the short future interconnected to power distribution system. Multifunctional BESS model and interconnection model to power system is simply configured, the problems of protection coordination and operation is studied. A line fault in the power distribution system are discussed such as line to ground and three phase fault in order to show the impact on power utilities, demand-side and BESS-side. In order to simulate a variable transient phenomenon due to 2 the BESS interconnection operation to power distribution system, in this paper, PSCAD/EMTDC simulation tools is used.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.5
• /
• pp.837-846
• /
• 1989

Belt tension distribution for an abrasive blet grinding was investigated analytically and experimentally for (1) slack side and (2) tight side blet grinding. Classical Eytelwein equation was used to predict the belt tension distribution with dividing contact angles into (1) inactive and (2) active angles. General friction theory was modified based on the friction force between the belt and the support in the grinding contact area that was obtained by experiments. It was found that analytical results were in good agreement with the experimental results. Also, the tight side belt grinding was recommended since it could carry out more grinding load than that of slack side belt grinding.

• Journal of Korean Society of Forest Science
• /
• v.98 no.5
• /
• pp.576-583
• /
• 2009

Based on the stem analysis and biomass measurement of 36 trees and 1,576 branches in Pinus sylvestris var. mongolica (Mongolian pine) plantations of Northeast China, this study was conducted to develop estimation model equation for leaf biomass of a single tree and branch, to examine the vertical distribution of leaf biomass in the crown, and to evaluate the proportional ratios of biomass by tree parts, stem, branch, and leaf. The results indicated that DBH and crown length were quite appropriate to estimate leaf biomass. The biomass of single branch was highly correlated with branch collar diameter and relative height of branch in the crown, but not much with stand density, site quality, and tree height. Weibull distribution function would have been appropriate to express vertical distribution of leaf biomass. The shape parameters from 29 sample trees out of 36 were less than 3.6, indicating that vertical distribution of leaf biomass in the crown was displayed by bell-shaped curve, a little inclined toward positive side. Apparent correlationship was obtained between leaf biomass and branch biomass having resulted in linear function equation. The stem biomass occupied around 80% and branch and leaf made up about 20% of total biomass in a single tree. As the level of tree class was increased from class I to class V, the proportion of the stem biomass to total biomass was gradually increased, but that of branch and leaf became decreased.

• Computers and Concrete
• /
• v.9 no.3
• /
• pp.179-193
• /
• 2012

The hydration of cement contributes to the performance characteristics of concrete, such as strength and durability. In order to improve the utilization efficiency of cement and its early properties, the particle size distribution (PSD) of cement varies considerably, and the effects of the particle size distribution of cement on the hydration process should be considered. In order to evaluate effects of PSD separately, experiments testing the isothermal heat generated during the hydration of cements with different particle size distributions but the same chemical composition have been carried out. The measurable hydration depth for cement hydration was proposed and deduced based on the experimental results, and a PSD hydration model was developed in this paper for simulating the effects of particle size distribution on the hydration process of cement. First, a reference hydration rate was derived from the isothermal heat generated by the hydration of ordinary Portland cement. Then, the model was extended to take into account the effect of water-to-cement ratio, hereinafter which was referred to as PSD hydration model. Finally, the PSD hydration model was applied to simulate experiments measuring the isothermal heat generated by the hydration of cement with different particle size distributions at different water-to-cement ratios. This showed that the PSD hydration model had simulated the effects of particle size distribution and water-to-cement ratio on the hydration process of cement with satisfactory accuracy.

• International Journal of Reliability and Applications
• /
• v.13 no.1
• /
• pp.19-35
• /
• 2012

This paper presents an optimum design of step-stress partially accelerated life test (PALT) plan which allows the test condition to be changed from use to accelerated condition on the occurrence of fixed number of failures. Various life distribution models such as exponential, Weibull, log-logistic, Burr type-Xii, etc have been used in the literature to analyze the PALT data. The need of different life distribution models is necessitated as in the presence of a limited source of data as typically occurs with modern devices having high reliability, the use of correct life distribution model helps in preventing the choice of unnecessary and expensive planned replacements. Truncated distributions arise when sample selection is not possible in some sub-region of sample space. In this paper it is assumed that the lifetimes of the items follow Truncated Logistic distribution truncated at point zero since time to failure of an item cannot be negative. Optimum step-stress PALT plan that finds the optimal proportion of units failed at normal use condition is determined by using the D-optimality criterion. The method developed has been explained using a numerical example. Sensitivity analysis and comparative study have also been carried out.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.9 no.2
• /
• pp.3-8
• /
• 1984

This paper considers the intermediate warehouse location problem in a two stage distribution system where commodities are delivered from the given set of capacitated factories to customers via uncapacitated intermediate warehouses. In order to determine the subset of warehouses to open which minimizes the total distribution costs including the fixed costs associated with opening warehouses, the cross decomposition method for mixed integer programming recently developed by T.J. Van Roy is used. The cross decomposition unifies Benders decomposition and Lagrangean relaxation into a single framework that involves successive solutions to a primal subproblem and a dual subproblem. In our problem model, primal subproblem turns out to be a transshipment problem and dual subproblem turns out to be an intermediate warehouse location problem with uncapacitated factories.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.33 no.3
• /
• pp.130-136
• /
• 2010

In this study, we propose a new method for generating candidate solutions based on both the Cauchy and the Gaussian probability distributions in order to use the merit of the solutions generated by these distributions. The Cauchy probability distribution has larger probability in the tail region than the Gaussian distribution. Thus, the Cauchy distribution can yield higher probabilities of generating candidate solutions of large-varied variables, which in turn has an advantage of searching wider area of variable space. On the contrary, the Gaussian distribution can yield higher probabilities of generating candidate solutions of small-varied variables, which in turn has an advantage of searching deeply smaller area of variable space. In order to compare and analyze the performance of the proposed method against the conventional method, we carried out experiments using benchmarking problems of real valued functions. From the result of the experiment, we found that the proposed method based on the Cauchy and the Gaussian distributions outperformed the conventional one for most of benchmarking problems, and verified its superiority by the statistical hypothesis test.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.23 no.60
• /
• pp.11-22
• /
• 2000

The main objective of this research is to analyze an order point and an order quantity of a distribution center and each branch to attain a target service level in multi-level inventory distribution system. In case of product item, we use the item with low volume of average monthly demand. Under the continuous review method, the distribution center places a particular order quantity to an outside supplier whenever the level of inventory reaches an order point, and receives the order quantity after elapsing a certain lead time. Also, each branch places an order quantity to the distribution center whenever the level of inventory reaches an order point, and receives the quantity after elapsing a particular lead time. When an out of stock condition occurs, we assume that the item is backordered. For considering more realistic situations, we use generic type of probability distribution of lead times. In the variable lead time model, the actually achieved service level is estimated as the expected service level. Therefore, this study focuses on the analysis of deciding the optimal order point and order quantity to achieve a target service level at each depot as a expected service level, while the system-wide inventory level is minimized. In addition, we analyze the order level as a maximum level of inventory to suggest more efficient way to develop the low demand item model.