• Economic and Environmental Geology
• /
• v.33 no.4
• /
• pp.309-320
• /
• 2000

Aperture is an important parameter for determining the hydraulic characteristics of fractured media. In this study the topography of artificial rock joint surface was measured using 3D laser profilometer to analyze the aperture distribution. The initial aperture distribution was determined when the contact area became one percent of total joint surface. The initial aperture distribution of granite joint, with the mean value of 0.78 mm and the standard deviation of 0.34 mm was much different from that of the marble joint, with the mean value of 0.57 mm and the standard deviation of 0.26 mm. Apertures of both granite and marble showed normal distributions. Aperture distribution with the contact area of 25% was also analyzed. Mean value was decreased to one third compared to the initial aperture, but the standard deviation was decreased slightly. To determine the spatial correlation of the aperture distribution variogram analysis was carried out on the initial aperture data. Most experimental variograms were fitted well with exponential model. It is expected that the measured aperture characteristics can be used for stochastic analysis of fluid flow through rock joints.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.6
• /
• pp.76-85
• /
• 1993

In this paper, we propose a stroke matching method for the off-line recognition of handprinted Hangul. In this method, the preprocessing steps such as position normalization, contour tracing and thinning are carried out first. Then, after extracting features such as the firection component distribution of contour, the direction component distribution of skeleton, and the distribution of structural feature points, strokes are extracted and matched based on the midpont distribution of the direction and the length of each stroke. In order to reduce the recognition time, a preliminary classification based on the direction component distribution features of the contour is performed. In order to domonstrate the performance of the proposed method, experiments with 520 most frequently used Hangul were performed, and 90.7% of correct recognition rate and 0.46second of recognition time per one character has been obtained. This results reveal that the proposed method can absorb effectively the noise in input character and the variations of stroke slant.

• IE interfaces
• /
• v.12 no.3
• /
• pp.401-405
• /
• 1999

We present a simulation model to generate the spatial distribution of mobiles in cellular communication network. Three types of spatial distributions are considered; biased, random, and ratio-based distributions. This study also points out and corrects the critical errors performed by Das and Morgera(1997) in getting random location of mobiles. By applying a simple path loss model, the effects of our correction on the signal-to-interference(SIR) ratio are discussed. The numerical results indicate that the variation of SIR in the Das's biased distribution is larger than that of other distributions. As compared with the random distribution, the average SIR error of the biased distribution is 91.1%.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.492_493
• /
• 2009

In this paper, we analyzed relation between weather distribution and output of PV module. Equivalent circuit of PV module was derived. Output of PV array was calculated considering temperature and insolation as input. Output of PV array installed on the roof top was also measured. Then, comparison between results was carried out to verify that relation between input and output is appropriate. Distribution of insolation and temperature was derived from KMA (Korea Meteorological Administration). Distribution of PV output was deduced, by considering weather distribution. The result of this paper can be used in economic analysis and reliability calculation.

• Applied Microscopy
• /
• v.46 no.3
• /
• pp.155-159
• /
• 2016

This paper analyses the relationship between the distribution of a dielectric layer on the apex of a metal field electron emitter and the distribution of electron emission. Emitters were prepared by coating a tungsten emitter with a layer of epoxylite resin. A high-resolution scanning electron microscope was used to monitor the emitter profile and measure the coating thickness. Field electron microscope studies of the emission current distribution from these composite emitters (Tungsten-Clark Electromedical Instruments Epoxylite resin [Tungsten/CEI-resin emitter]) have been carried out. Two forms of image have been observed: bright single-spot images, thought to be associated with a smooth substrate and a uniform dielectric layer; and multi-spot images, though to be associated with irregularity in the substrate or the dielectric layer.

• International Journal of High-Rise Buildings
• /
• v.3 no.2
• /
• pp.121-145
• /
• 2014

The story shear force distributions of most seismic design codes generally reflect the influences of higher vibration modes based on the elastic deformations of structures. However, as the seismic design allows for the plastic behavior of a structure, the story shear force distribution shall be effective after it is yielded due to earthquake excitation. Hence this study conducted numerical analyses on the story shear force distributions of most seismic design codes to find out the characteristics of how a structure is damaged between stories. Analysis results show that the more forces are distributed onto high stories, the lower its concentration is and the more energy is absorbed. From the results, this study proposes the optimum story shear force distribution and its calculation formula that make the damages uniformly distributed onto whole stories. Consequently, the story damage distribution from the optimum calculation formula was considerably more stable than existing seismic design codes.

• Journal of applied mathematics & informatics
• /
• v.35 no.5_6
• /
• pp.477-493
• /
• 2017

The dual generalized order statistics is a unified model which contains the well known decreasingly ordered random variables like order statistics and lower record values. With this definition we give simple expressions for single and product moments of dual generalized order statistics from Dagum distribution. The results for order statistics and lower records are deduced from the relations derived and some computational works are also carried out. Further, a characterizing result of this distribution on using the conditional moment of the dual generalized order statistics is discussed. These recurrence relations enable computation of the means, variances and covariances of all order statistics for all sample sizes in a simple and efficient manner. By using these relations, we tabulate the means, variances, skewness and kurtosis of order statistics and record values of the Dagum distribution.

• Journal of Korean Society for Quality Management
• /
• v.25 no.1
• /
• pp.182-192
• /
• 1997

The well-known standard normal distribution has been used within the limit of standard variable value of u=3.59. However, the probability values above the limit are not given in the literature. In this study, a probability computation program for standard normal distribution to u=5.99 with the proportional normal distribution a, pp.oximation suggested by Abramowitz and Stegun, Hastings is developed. The new standard normal distribution table developed by the program is presented and will be of help to estimate of probability values for testing and estimation of process mean value, lot acceptable probability, defective percentage of PPM unit of an out-of specification limit, process capability, test power of control charts, probability and statistics.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.3
• /
• pp.423-430
• /
• 2012

This study was conducted to qualify the equality of the flow distribution from open channel between rapid mixing basin and flocculation basins in a domestic S_ water treatment plant, and to suggest a remedy for improving the equality. In order to evaluate the feasibility of the suggested remedy, computational fluid dynamics (CFD) technique are used, and for verifying the CFD simulation results tracer tests were carried out. From the results of CFD simulation and tracer tests, it was investigated that the modification of hydraulic structure in the distribution channel, which is to install the longitudinal orifice baffle in flow direction, could improve the equality of the flow distribution over 75%.

• Journal of Astronomy and Space Sciences
• /
• v.40 no.2
• /
• pp.67-77
• /
• 2023

The Titius-Bode's relation has been historically successful in predicting the location of Ceres in the solar system, while its physical basis remains hidden. In this study, we attempt to answer the question of whether the Titius-Bode's relation is universally valid for exoplanetary systems with plural exoplanets. For this purpose, we statistically study the distribution of the ratio of the orbiting periods of two planets in 32 exoplanetary systems hosted by a single star. We only consider the period ratios derived from exoplanets orbiting a single star since celestial objects under investigation are kept as simple as possible and free from uncertainties such as the mass of the host star. We find that the distribution of period ratios of two exoplanets appears inconsistent with that derived from the Titius-Bode's relation using the χ² test. We also found that the distance distribution in exoplanetary systems unlikely follows the uniform distribution or the Poisson's distribution. It is noted, however, that more rigorous statistical tests should be carried out to reach a more certain conclusion.