• Journal of Navigation and Port Research
• /
• v.38 no.6
• /
• pp.689-694
• /
• 2014

The Korean government has introduced and enforced maritime traffic safety assessment to secure traffic safety since 2010. The maritime traffic safety assessment is needed by law to design a new port or modify an existing one. According to Korea Maritime Safety Act, in the assessment the propriety of marine traffic system consists of the safety of channel transit and berthing/unberthing maneuver, safety of mooring, and safety of marine traffic flow. The safety of channel transit and berthing/unberthing maneuver can be evaluated only by ship-handling simulation. The ship-handling simulation is carried out by sea pilots working with the port concerned. The vessel's proximity measure is an important factor to evaluate traffic safety. The proximity measure is composed of vessel's closest distance to channel boundary and probability of grounding/collision. What is more, the probability of grounding becomes important. According to central limit theorem, a sample has a normal distribution on condition that its size is more than 30. However, more than 30 simulation runs bring about the increase of assessment period and difficulty of employing sea pilots. Therefore this paper is to find out minimum sample size for evaluating vessel's proximity. First sample sets of size of 3, 5, 7, 9 etc. are selected randomly on the basis of normal distribution. And then KS test for goodness of fit and t-test for confidence interval are applied to each sample set. Finally this paper decides the minimum sample size. As a result this paper suggests the minimum sample size of 5, that is, the simulation of more than five times.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.58 no.2
• /
• pp.141-152
• /
• 2022

As a method to understand the ecological habits around the artificial reef, various reports such as fishing gear survey, diving, sound survey, underwater CCTV and camera, etc. are reported. Among them, the sound survey method is carried out by installing an acoustic system on the ship and can be investigated regardless of the marine environment such as time constraints and turbidity. Such method, however, takes a lot of manpower and time as the ship travels at a constant speed. Investigations around artificial reefs are being conducted in an artificial way, and a lot of time and labor are consumed as such. Maritime buoys have been operated for various purposes such as route signs, weather observation, marine environment monitoring and defense monitoring for navigation safety in the past, but studies on monitoring systems for ecological habits and distribution of fish using marine buoys are remarkably insufficient. Therefore, this study aims to develop a system that allows users to directly monitor fish group detector data by estimating the distribution of fish groups around artificial reefs and using wireless communication at sea. In order to confirm the suitability of the maritime buoy used in this study, it was operated to compare data using LTE-equipped buoys capable of wireless communication and a data logger-type system buoy. Data transmission of buoys capable of LTE communication was carried out in a 10-minute ON, 10-minute OFF method due to the limitation of the power supply capacity, and data of the data logger-type buoy received full data. We compared and analyzed the data received from the two fish detectors. It is expected that real-time monitoring of the wireless buoy detection device using LTE will be possible through future research.

• Journal of Korean Academy of Nursing
• /
• v.1 no.1
• /
• pp.3-26
• /
• 1970

That's an attempt to study about knowledge, attitudes and practice of the residents with regard to maternal child health, family, planning, and tuberculosis in rural area which was chosen to be a demonstration area for nursing students of College of Nursing, Yonsei University for their public health nursing practice. In addition, it is designed to collect information on population of the area such as age and sex distribution, mobility, and other characteristics also be sought by doing a census. The purpose of study is to obtain data which are needed for planning student learning experiences in the community. The information which was obtainable through this study is as follows; 1. In demographic aspect a. Population structure was a typical rural type in terms of population pyramid. b. Distribution of age and sex of residents showed more female in the older ages. c. Population has not moved much. Majority of them have been living in the area since their births. 2. In sociological aspect a. The level of education of female was comparatively lower than male. b. The residents of the area did not have any special religion. c. The economic status was found low or middle class. 3. In health practice In general health knowledge, attitudes and practice appeared to be poor. As a result of this study, it could be summararized that there are a great public health nursing needs in the community. According to these needs found and to it's nature, severity and massiveness, the nurse instructors with students were able to set up a priority system in services. Meanwhile student case load can be logically figured out in consideration of variety of experiences need for each student. The study helped student not only to find out resident characteristics and their health problems in terms of family and community problem but also to provide a good learning experience by participating in the interviewing. In sum this type of study is necessary for planning of student field experience when no data are available where students are going to have field experiences in public health nursing.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.18 no.1
• /
• pp.11-15
• /
• 1982

The authors carried out an experiment to find out the response of filefish, Navodon modestus (Gunther), to the colored nets. The experimental tank of dimensions 360L$\times$50W$\times$55H cm was set up in a dark room. Six longitudinal sections, each being 60cm intervals, are marked in the tank to observe locations of the fishes. The depth of water in the tank was 50 cm. Two light bulbs of 30 W, placed at the both ends of the tank, projected the light horizontally into the tank. Two different colored nets selected from seven colors(white, black, gray, red, green, blue, and yellow) were placed 60 cm distance from each side of the tank. The fishes were acclimatized in the dark for 60 minutes before they were employed in the experiment. After the light was turned on, the number of fish in each section of the tank was counted for an hour in every 2 minutes into interval, the mean value of fishes in each section was used as the distribution rate of the fish. The order of colors disliked by fishes was found to be white, red, green, black, blue, yellow and gray. The distribution rate of fish in front of colored net shows a decreasing tendency as the lapse of illumination time increases.

• Geomechanics and Engineering
• /
• v.28 no.6
• /
• pp.613-624
• /
• 2022

A study of the evolution of overburden fractures under the solid-fluid coupling state was conducted based on the geological and mining characteristics of the coal seam depth, weak strata cementation, and high-intensity mining in the mining areas of West China. These mining characteristics are key to achieving water conservation during mining or establishing groundwater reservoirs in coal mines. Based on the engineering background of the Daliuta Coal Mine, a non-hydrophilic simulation material suitable for simulating the weakly cemented rock masses in this area was developed, and a physical simulation test was carried out using a water-sand gushing test system. The study explored the spatial distribution and dynamic evolution of the fractured zone in the mining overburden under the coupling of stress and seepage. The experimental results show that the mining overburden can be vertically divided into the overall migration zone, the fracture extension zone and the collapse zone; additionally, in the horizontal direction, the mining overburden can be divided into the primary fracture zone, periodic fracture zone, and stop-fracture zone. The scope of groundwater flow in the overburden gradually expands with the mining of coal seams. When a stable water inrush channel is formed, other areas no longer generate new channels, and the unstable water inrush channels gradually close. Finally, the primary fracture area becomes the main water inrush channel for coal mines. The numerical simulation results indicate that the overlying rock breaking above the middle of the mined-out area allows the formation of the water-conducting channel. The water body will flow into the fracture extension zone with the shortest path, resulting in the occurrence of water bursting accidents in the mining face. The experimental research results provide a theoretical basis for the implementation of water conservation mining or the establishment of groundwater reservoirs in western mining areas, and this theoretical basis has considerable application and promotion value.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.6
• /
• pp.767-777
• /
• 2012

Annular Biofilm Reactor (ABR) equipped with coupons of three different pipe materials (STS 304, PVC, PE) was used to generate drinking water biofilm samples. The level of assimilable organic carbon (AOC) during the sample generation period was $37.3{\mu}g/L$, and this level did not seem to be low enough to limit the formation of biofilm in this study. Terminal-restriction fragment length polymorphism (T-RFLP) analyses determined T-RF profile as early as 3 h of exposure on PVC coupons. Average surface roughness ($R_a$) measured by atomic force microscopic analyses was 125.7 nm for PVC, and this value was higher than for STS (71.6 nm) and PE (74.0 nm). However, biofilm formation was faster on STS (6 h) than on PE (12 h), which indicated that surface roughness might not be the only factor that controlled the initiation of biofilm development. Upon detection of the T-RF peaks, richness (S) and diversity indices such as Shannon (H) and Simpson (1/D) demonstrated a rather slow increase until 48 h followed by rapid increase regardless of the pipe materials. Differences of microbial community structures among the biofilm samples were determined based on the cluster analysis using Jaccard coefficients (Sj). Biofilm communities could be divided into two distinct groups according to the exposure time regardless of the pipe materials. First group contained a young (< 48 h) biofilm samples (10 out of 11) but second group contained a mature (${\geq}$ 48 h) samples (11 out of 14). Results suggested that, due to the complexity of biofilm, the targeting of the first group of cluster was crucial for optimizing the management of drinking water distribution systems and controlling microbial growth.

• Korean Journal of Applied Biomechanics
• /
• v.30 no.1
• /
• pp.7-16
• /
• 2020

Objective: It is to find factors related to stability through analysis of plantar pressure factors according to the level of instability when performing Snatch. Method: Foot pressure analysis was performed while 10 weightlifters performed 80% of the highest level of Snatch, and motion was classified and analyzed in 3 grades according to the level of instability. Results: First, in Bad Motion, the movement distance of the pressure center in the direction of ML and AP was larger significantly in Phase 2. Second, in Phase 2, the number of zero-crossing in the AP direction was larger statistically significantly in Good Motion. Third, in the bad motion in Phase 3, the number of zero-crossing in the ML direction showed a significantly larger value. Fourth, in Phase 4, it was found that the more stable the lock out motion, the greater the activity of foot controlling in the left and right directions. Fifth, Phase 3, the greater the Maximum/Mean foot pressure value, the more stable the pulling action. Sixth, in Phase 2, the foot pressure was concentrated with a wide distribution in the midfoot and rearfoot. Seventh, the triggering number of the forefoot region was small in the last pull phase. Eighth, the number of triggers in the toe area was significantly higher during Good Motion in Phase 4. Conclusion: Summarizing the factors of instability in Snatch, there was no significant difference in Phase 1 for each condition. In order to enhance the stability in Phase 2, the sensory control ability in the AP direction is required, and focusing the foot pressing motion with a wide distribution in the middle and rear parts increases the instability. In Phase 3, it was found that the more unstable, the more sensory control activity was performed in the ML direction, the stronger the forefoot pressing action should be performed for a stable Snatch. In Phase 4, It is important that the feet sensory control activity in ML directions and the control ability of the toes in order to have stable Lock out motion.

• Journal of the Korean Dietetic Association
• /
• v.13 no.2
• /
• pp.138-156
• /
• 2007

The purposes of this study were to a) measure the service quality attributes of foodservice type such as school foodservice, hospital foodservice and business & industry(B&I) foodservice, managed by contract management company(CMC), b) compare with service quality attributes by CMC scale, c) analyze overall customer satisfaction(CS) by the foodservice type and the CMC scale, and d) identify the effect of service quality attributes on an overall CS by the foodservice type and the CMC scale. The questionnaires were handed out to 6,620 customers of 207 school, 38 hospital, and 86 B&I foodservices in 108 CMCs. The statistical data analysis was completed using SPSS Win(ver 12.0) for descriptive analysis, t-test, reliability analysis, and multiple linear regression analysis. From an analysis on service quality attributes, 'proper arrangement of table and chair at hall distribution(3.53)', 'operation of nutrition education(3.50)' were highly perceived to student, 'correctable serving(4.08)', 'serve at fixed distribution time(4.08)', 'kindness of serving employee(4.04)' were highly perceived to patient, 'employee's kindness(3.84)' were highly perceived to customer of B&I. In comparison of service quality attributes by CMC scale, most scores of large enterprise(LE) were significantly higher than small and medium sized enterprise(SME) in school foodservice, hospital foodservice and B&I foodservice. Overall CS levels were 3.53 out of a maximum 5 on B&I, 3.46 on school, and 3.44 on hospital and were evaluated differently CS score by CMC scale. Finally, regression results for the effects of service quality attributes on overall CS by each of foodservice type were identified significantly different service quality attributes by foodservice type such as school, hospital, B&I(p<.001) and by CMC scale. For considering the goal of enterprise on profit-making through CS and the needs of customer on CS at moment of truth(MOT), the findings should be applied to the CMC and the foodservice industry.

• The Journal of Pediatrics of Korean Medicine
• /
• v.19 no.2
• /
• pp.31-40
• /
• 2005

Objectives: This study was performed to investigate the character of childhood common cold according to four seasons. Methods: We made an investigation into medical record of 432 children under fifteen years of age who visited pediatrics or emergency room suffering from common cold. We analyzed the principal and secondary symptoms of the children classifying four seasons by $SPSS^{\circledR}$ 12.0 for windows. Results: Male to female ratio were 1.42:1, the average of age was 3.86 years old. Distribution of principal symptoms was that nasal discharge was 231(56.1%), cough was 233(54.1%), nasal obstruction was 162(39.3%), secretion and sputum were 126(30.6%), fever was 121(29.4%), and headache was 13(3.2%). Out of these fever occurred in high frequency during spring and summer, nasal obstruction occurred in high frequency during spring and autumn. Distribution of secondary symptoms was that throat pain was 93(22.6%), otalgia was 39(9.5%), vomiting was 35(8.5%), abdominal pain was 30(7.3%), anorexia was 23(5.6%), sweating was 21(5.1%), diarrhea was 19(4.6%), and startle was 11(2.7%). Out of these otalgia occurred in high frequency during spring and summer, diarrhea occurred in high frequency during autumn and winter. Conclusions: A few symptoms can be the character according to four seasons.

• Food Science of Animal Resources
• /
• v.40 no.1
• /
• pp.21-33
• /
• 2020

This study aimed to determine the current prevalence, serovar distribution and antimicrobial resistance rate and patterns of nontyphoid Salmonella (NTS) in slaughter sheep and their edible offal. While filling the gap of up to date related information in Turkey, data presented is also of significance since contamination of ovine meat, its products and offal with this pathogen is threat to public health due to their considerably high consumption rates in our country. Current NTS carriage in 200 apparently healthy slaughter sheep by ISO 6579:2002, 6579:2002/A1:2007 standard bacteriology (ISO) was 5% (10/200) (4 fecal content - 2%, 3 mesenterial lymph node - 1.5%, 3 kidney - 1.5%) out of 1,400 samples (0.7%), with no isolation from carcass, liver, gallbladder, spleen. Real-time PCR was in substantial agreement to ISO in confirming Salmonella-suspect isolates (Relative Trueness: 93.6%). S. Newport (40%) was the predominant serovar, followed by the second prevalent serovars as S. Typhimurium and S. Kentucky (20%), and by S. Umbilo and S. Corvallis (10%). Four and 6 out of 10 NTS isolates were susceptible (40%) and resistant (60%) to 18 antimicrobials, respectively. S. Typhimurium isolates were multidrug resistant (MDR) to tigecycline and sulphamethoxazole/trimethoprim, with one also resistant to cefepime. S. Corvallis was MDR to ampicillin, ciprofloxacin, norfloxacin and pefloxacin. The predominance of S. Newport and first isolation of S. Corvallis in sheep in the world; first time isolations of Newport, Kentucky, Corvallis, Umbilo serovars from sheep in Turkey; and high antimicrobial resistance rates obtained in majority of the isolates highlights study findings.