• Journal of Fashion Business
• /
• v.7 no.5
• /
• pp.66-82
• /
• 2003

China shows body size differences owing to varied climates, economic development, living standards, and ethnic distribution from region to region. That's why some regional research regarding body sizes is necessary for the advancement of clothing goods into China. Here, the materials of the Chinese standard "GB/T 1335-1997 Clothing Sizes" are analyzed to reveal the somatotypes of Chinese adults. Height, chest girth and waist girth were differently noticed in six areas. 1. The distribution rates of four body types (Y, A, B, C) were diverse in six regions. 2. Regional differences were seen as follows: 1) As for the height of male adults, areas 1(Northeast, Hwabuk) and 2(Central Western) were larger than the national mean. Areas 3(Gwangdong, Gwangseo, Bokgeon), 4 (Unnam, Gwiju, Sacheon) and 5(Downstream Jang River) were rather small. 2) As for the height of female adults, areas 1, 2 and 6 (Midstream Jang River) were larger than the national mean. Areas 3 and 4 were smaller than the average. 3) As for the bust girth of male adults, area 1 was the only area that exceeded the national mean. Areas 3 and 4 turned out smaller than the average. 4) As for the bust girth of female adults, areas 1, 2 and 6 exceeded the national average. The other three areas were lower. 5) As to the waist girth of adult males, areas 1 and 2 exceeded the national average. The other four areas were lower. 6) As to the waist girth of adult females, areas 1, 2 and 6 exceeded the national average. Areas 4 and 5 were lower. 7) In the height, bust girth and waist girth of male and female adults, most regions showed differences in means, regional distribution and regional rates.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.19 no.6
• /
• pp.19-25
• /
• 2015

Numerical simulations of the hot gas valve with a pintle have been conducted in order to investigate the effect of numerical methods and computational domains. The grid sensitivity is checked by varying the grid number from 100,000 to 1,700,000. The existence of ambient region doesn't make the significant differences of the flow-field and the temperature distribution. Three turbulence models are adopted to figure out its influence on the thrust and temperature distribution: Spallart-Allmaras, RNG $k-{\varepsilon}$, $k-{\omega}$ SST. The thrusts of the hot gas valve are almost same in all cases of the simulation, however, there are about 5% difference in the temperature distribution. With the ambient region, the difference are observed in the temperature distribution with respect to the number of grids.

• Atmosphere
• /
• v.18 no.3
• /
• pp.171-182
• /
• 2008

In this study, we analyzed the spatial and temporal distribution of wind resources over Korea based on hourly observational data recorded over a period of 5 years from 457 stations belonging to Korea Meteorological Administration (KMA). The surface and 850 hPa wind data obtained from the Korea Local Analysis and Prediction System (KLAPS) and the Regional Data Assimilation and Prediction System (RDAPS) over a period of 1 year are used as supplementary data sources. Wind speed is generally high over seashores, mountains, and islands. In 62 (13.5%) stations, mean wind speeds for 5 years are greater than $3ms^{-1}$. The effects of seasonal wind, land-sea breeze, and mountain-valley winds on wind resources over Korea are evaluated as follows: First, wind is weak during summer, particularly over the Sobaek Mountains. However, over the coastal region of the Gyeongnam-province, strong southwesterly winds are observed during summer owing to monsoon currents. Second, the wind speed decreases during night-time, particularly over the west coast, where the direction of the land breeze is opposite to that of the large-scale westerlies. Third, winds are not always strong over seashores and highly elevated areas. The wind speed is weaker over the seashore of the Gyeonggi-province than over the other seashores. High wind speed has been observed only at 5 stations out of the 22 high-altitude stations. Detailed information on the wind resources conditions at the 21 stations (15 inland stations and 6 island stations) with high wind speed in Korea, such as the mean wind speed, frequency of wind speed available (WSA) for electricity generation, shape and scale parameters of Weibull distribution, constancy of wind direction, and wind power density (WPD), have also been provided. Among total stations in Korea, the best possible wind resources for electricity generation are available at Gosan in Jeju Island (mean wind speed: $7.77ms^{-1}$, WSA: 92.6%, WPD: $683.9Wm^{-2}$) and at Mt. Gudeok in Busan (mean wind speed: $5.66ms^{-1}$, WSA: 91.0%, WPD: $215.7Wm^{-2}$).

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.11
• /
• pp.607-618
• /
• 2015

This study was conducted to suggest hydraulic modification for improving evenness of inlet flow distribution into side stream type low-pressure MF (microfiltration) module using CFD (computational fluid dynamics) simulation and PIV (particle image velocimetry) techniques. From the results of CFD simulation for various typed inlet structure, it was investigated that installing internal orifice baffle in inlet the distribution channel could improve the evenness of inlet flow distribution over about 40%. Also, from the results of PIV measurements which were carried out for verifying the CFD simulation, it was observed that the momentum of the water body coming from the opposite side of the inlet was relatively larger. This momentum would generate strong shear force in the near of inlet side wall. On the other hands, occurrence of dead zone and eddy flow was confirmed in the opposite side.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.2
• /
• pp.139-152
• /
• 1998

In the present study, the flow characteristics of developing laminar oscillatory flows in a square -sectional 180 deg. curved duct are investigated experimentally. The experimental study using air in a square-sectional 180 deg. curved duct is carried out to measure velocity distributions with a data acquisition and LDV (Laser Doppler Velocimetry) processing system. In this system, Rotating Machinery Resolver (RMR) and PHASE program are used to obtain the results of unsteady flows. The major flow characteristics of developing oscillatory flows are found by analyzing velocity curves, mean velocity profiles, time-averaged velocity distribution of secondary flow, wall shear stress distributions, and entrance lengths. In a lower dimensionless angular frequency, the axial velocity distribution of laminar oscillatory flow in a curved duct shows a convex shape in a central part and axial symmetry. The maximum value of wall shear stress in a lower dimensionless angular frequency is located in an outside wall, but according to increasing the dimensionless angular frequency, the maximum of wall shear stress is moved to inner wall. The entrance lengths of laminar oscillatory flows in a square-sectional 180 deg. curved duct is obtained to 90 deg. of bended angle of duct in this experimental conditions.

• Korean Journal of Agricultural Science
• /
• v.2 no.1
• /
• pp.101-110
• /
• 1975

This study was carried out to determine the effect of water control on Rice plan in warmer season(July~August). The results are summarized as follows; 1. Compared to ordinary watering methods, a constant irrigation method indicated a decrease in water temperature of $1.5^{\circ}C$. 2. In the plot of constant irrigation, there was an increase in the root system in general and an increase of root distribution near the surface in particular. The near surface root distribution under ordinary watering method shows about forty percent distribution. The constant irrigation method shows a near-surface root distribution of sixty-percent within a perimeter of five centimeters. 3. Under the contants irrigation method, there was an increase in length and area of the flag leaf. 4. The total nitrogen and silica content of leaf-bodies at maturing stage was greater when using the constant irrigation method. 5. There was an increase in the number of panicles and the number of spikelets when using the constant irrigation method. 6. The yield was remarkably increased with constant irrigation.

• Proceedings of the IEEK Conference
• /
• 2000.06b
• /
• pp.56-59
• /
• 2000

In this paper, we have made a comparison between secondary ion mass spectroscopy(SIMS) data by the 5kcV-15keV boron implantation and computer simulation results. In order to make electrical activation of implanted carriers, thermal annealing are carried out by RTP method for 30s at 1000$^{\circ}C$ Two dimensional doping concentration distribution from different mask dimensions under inert gas annealing, dry-, and wet-oxidation condition were calculated and simulated with microtec simulator.

• Journal of the Korean Data and Information Science Society
• /
• v.22 no.6
• /
• pp.1241-1250
• /
• 2011

In this paper, we develop noninformative priors for the log-normal distributions when the parameter of interest is the common mean. We developed Jeffreys' prior, th reference priors and the first order matching priors. It turns out that the reference prior and Jeffreys' prior do not satisfy a first order matching criterion, and Jeffreys' pri the reference prior and the first order matching prior are different. Some simulation study is performed and a real example is given.

• Applied Biological Chemistry
• /
• v.15 no.1
• /
• pp.41-47
• /
• 1972

Comparative study on dynamic change of canopy structure during ripening period were carried out by using newly bred high yield rice cultivar (IR 667-Suwon 213) and a commercial variety, Jinhung in relation to nitrogen nutrition. The results were as follows. 1. Canopy structure pattern (vertical distribution of dry matter density at heading)was vertical type for Jinhung and horizontal type for IR 667. 2. The vertical distribution pattern of leaf area density (or weight) in the canopy was central dominant type for IR 667 while apical dominant type for Jinhung. 3. Canopy conservation pattern and percent distribution pattern of leaf area density followed the vertical distribution pattern of leaf area density. 4. Canopy persistence was weaker in IR 667, thus they have smaller canopy conservation ratio indicating faster senescence. 5. Slow supply of nitrogen (sulfur coated urea) showed a trend to change the apical dominant pattern into the central dominant pattern by the conservation of central portion, and it-resulted in higher yield though nitrogen nutrition did little affect canopy pattern. 6. The central and apical dominant pattern appeared to be well matched to the upper leaf-dependent type and the lower leaf-dependent type of grain yield, respectively.

• Korean Journal of Ichthyology
• /
• v.5 no.2
• /
• pp.217-225
• /
• 1993

A study on the distribution and mortality of eggs and larvae of anchovy. Engraulis japonica, was carried out on the basis of data collected from ichthyoplankton survey in the southern coastal waters of Korea from June to August in 1990. Egg and larval distribution areas were shifted from the adjacent waters of Namhae Is, to the eastern waters of Goeje Is, while eggs and larvae were developed in June. However, high densities of eggs and larvae of anchovy and were found near Goeje Is. in July. Anchovy eggs and larvae were correlated significantly with zooplankton in July, and were not in June and August. It is likely that the low instantaneous mortality coefficients in eggs and high values in the larvae during June and high values in eggs and low values in the larvae during July were affected by the distribution pattern of zooplankton.