• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.6
• /
• pp.579-586
• /
• 2011

It is very critical for image processing of IIR (Imaging Infrared) seekers to achieve improved guidance performance for missile systems to determine appropriate thresholds in various environments. In this paper, we propose automatic threshold determination methods for proper thresholds to extract definite target signals in an EOCM (Electro-Optical Countermeasures) environment with low SNR (Signal-to-Noise Ratios). In particular, thresholds are found to be too low to extract target signals if one uses the Otsu method so that we suggest a Shifted Otsu method to solve this problem. Also we improve extracting target signal by changing Shifted Otsu thresholds according to the TBR (Target to Background Ratio). The suggested method is tested for real IIR images and the results are compared with the Otsu method. The HPDAF (Highest Probabilistic Data Association Filter) which selects the target originated measurements by taking into account of both signal intensity and statistical distance information is applied in this study.

• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.127-131
• /
• 2020

Fuzzy C-Means(FCM) algorithm is frequently used as a representative image segmentation method using clustering. FCM divides the image space into cluster regions with similar pixel values, which requires a lot of segmentation time. In particular, the processing speed problem for analyzing various patterns of the current users of the web is more important. To solve this speed problem, this paper proposes an improved FCM (Improved FCM : IFCM) algorithm for segmenting the image into the Otsu threshold and FCM. In the proposed method, the threshold that maximizes the variance between classes of Otsu is determined, applied to the FCM, and the image is segmented. Experiments show that IFCM improves performance by shortening image segmentation time compared to conventional FCM.

• Journal of Korea Water Resources Association
• /
• v.57 no.3
• /
• pp.181-193
• /
• 2024

The increasing atmospheric imbalance caused by climate change leads to an elevation in precipitation, resulting in a heightened frequency of flooding. Consequently, there is a growing need for technology to detect and monitor these occurrences, especially as the frequency of flooding events rises. To minimize flood damage, continuous monitoring is essential, and flood areas can be detected by the Synthetic Aperture Radar (SAR) imagery, which is not affected by climate conditions. The observed data undergoes a preprocessing step, utilizing a median filter to reduce noise. Classification techniques were employed to classify water bodies and non-water bodies, with the aim of evaluating the effectiveness of each method in flood detection. In this study, the Otsu method and Support Vector Machine (SVM) technique were utilized for the classification of water bodies and non-water bodies. The overall performance of the models was assessed using a Confusion Matrix. The suitability of flood detection was evaluated by comparing the Otsu method, an optimal threshold-based classifier, with SVM, a machine learning technique that minimizes misclassifications through training. The Otsu method demonstrated suitability in delineating boundaries between water and non-water bodies but exhibited a higher rate of misclassifications due to the influence of mixed substances. Conversely, the use of SVM resulted in a lower false positive rate and proved less sensitive to mixed substances. Consequently, SVM exhibited higher accuracy under conditions excluding flooding. While the Otsu method showed slightly higher accuracy in flood conditions compared to SVM, the difference in accuracy was less than 5% (Otsu: 0.93, SVM: 0.90). However, in pre-flooding and post-flooding conditions, the accuracy difference was more than 15%, indicating that SVM is more suitable for water body and flood detection (Otsu: 0.77, SVM: 0.92). Based on the findings of this study, it is anticipated that more accurate detection of water bodies and floods could contribute to minimizing flood-related damages and losses.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.287-287
• /
• 2000

As a method to control the bacteria number in adequate level, a real time control system based on microscope image processing measurement for the bacteria is adopted. For the experiment, Ammonia-oxidizing bacteria such as Acinetobacter sp. are used. This paper proposed hybrid method combined watershed algorithm with adaptive automatic thresholding method to enhance segmentation efficiency of overlapped image. Experiments was done to show the effectiveness of the proposed method compared to traditional Otsu's method, Otsu's method with adaptive automatic thresholding method and human visual method.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.10a
• /
• pp.1555-1558
• /
• 2015

본 논문에서는 프레임 블록화와 Otsu 임계값 설정 방법을 이용한 샷 전환 탐지 알고리즘을 제안한다. 제안 방법은 연속된 두 프레임을 일정 크기의 영역으로 분할하여 두 프레임 간 대응되는 영역의 히스토그램 차이를 이용해 샷 전환을 탐지한다. 또한 각 영상마다 Otsu 임계값 설정 방법을 이용하여 자동으로 임계값을 설정한다. 제안 방법의 실험은 영화, 드라마, 애니메이션 등 다양한 영상에 대해 테스트되었으며, 기 연구된 샷 전환 탐지 알고리즘과 비교 시 우수한 탐지율을 보였다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.17 no.6
• /
• pp.725-730
• /
• 2007

Gray-level histogram-based threshold selection methods such as Otsu's method, Huang and Wang's method, and etc. have been widely used for the threshold selection in image processing. They are simple and effective, but take too much time to determine the optimal multilevel threshold values as the number of thresholds are increased. In this paper, we measure correlation between gray-levels by using the Gaussian function and define a Gaussian-type finite mixture distribution which is combination of the Gaussian distribution function with the gray-level histogram, and propose a fast and effective threshold selection method using it. We show the effectiveness of the proposed through experimental results applied it to three images and the efficiency though comparison of the computational complexity of the proposed with that of Otsu's method.

• Journal of Power System Engineering
• /
• v.20 no.4
• /
• pp.32-37
• /
• 2016

This paper proposes two measurement methods for injured rate of fish surface using color image segmentation method based on K-means clustering algorithm and Otsu's threshold algorithm. To do this task, the following steps are done. Firstly, an RGB color image of the fish is obtained by the CCD color camera and then converted from RGB to HSI. Secondly, the S channel is extracted from HSI color space. Thirdly, by applying the K-means clustering algorithm to the HSI color space and applying the Otsu's threshold algorithm to the S channel of HSI color space, the binary images are obtained. Fourthly, morphological processes such as dilation and erosion, etc. are applied to the binary image. Fifthly, to count the number of pixels, the connected-component labeling is adopted and the defined injured rate is gotten by calculating the pixels on the labeled images. Finally, to compare the performances of the proposed two measurement methods based on the K-means clustering algorithm and the Otsu's threshold algorithm, the edge detection of the final binary image after morphological processing is done and matched with the gray image of the original RGB image obtained by CCD camera. The results show that the detected edge of injured part by the K-means clustering algorithm is more close to real injured edge than that by the Otsu' threshold algorithm.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.4
• /
• pp.1707-1710
• /
• 2014

Background: The objective of this study was to evaluate baseline use and positive rates of staging images (bone scan, CT) in newly diagnosed patients with prostate cancer (PCa) and to improve staging image overuse. Materials and Methods: This retrospective study covered a consecutive series of patients with PCa who underwent stage imaging at our institution between 2006 and 2011. Various clinical and pathological variables (age, PSA, biopsy Gleason score, clinical T stage, positive biopsy core rate) were evaluated by multivariate logistic regression analysis for their ability to predict a positive staging image. All patients were stratified according to the NCCN risk stratification and positive rates were compared in each risk group. Results: 410 patients (100%) underwent a bone scan and 315 patients (76.8%) underwent a CT scan. Some 51 patients (12.4%) had a positive bone scan, clinical T3 and T4 being significant independent predictors. Positive bone scan rates for low-, intermediate-, high-, and very high-risk groups were 0%, 0%, 8.25%, and 56.6%. Some 59 (18.7%) patients had a positive CT scan, with elevated PSA and clinical T3, T4 as significant independent predictors. Low-, intermediate-, high- and very high-risk group rates were 0%, 0%, 13.8% and 80.0%. Conclusions: The incidences of positive staging image in low- and intermediate- risk group were reasonably low. Following feedback on these results, staging in low- and intermediate- risk groups could be omitted.

• International Journal of Automotive Technology
• /
• v.7 no.2
• /
• pp.227-235
• /
• 2006

In this paper a robust image processing method with modified Otsu algorithm to recognize the road lane for a real-time controlled autonomous vehicle is presented. The main objective of a proposed method is to drive an autonomous vehicle safely irrespective of road image qualities. For the steering of real-time controlled autonomous vehicle, a detection area is predefined by lane segment, with previously obtained frame data, and the edges are detected on the basis of a lane width. For stable as well as psudo-robust autonomous driving with "good", "shady" or even "bad" road profiles, the variable threshold with modified Otsu algorithm in the image histogram, is utilized to obtain a binary image from each frame. Also Hough transform is utilized to extract the lane segment. Whether the image is "good", "shady" or "bad", always robust and reliable edges are obtained from the algorithms applied in this paper in a real-time basis. For verifying the adaptability of the proposed algorithm, a miniature vehicle with a camera is constructed and tested with various road conditions. Also, various highway road images are analyzed with proposed algorithm to prove its usefulness.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.40 no.6
• /
• pp.149-156
• /
• 2003

This paper proposes a face recognition method based on modified Otsu binarization, Hu moment and linear discriminant analysis (LDA). Proposed method is robust to brightness, contrast, scale, rotation, and translation changes. Modified Otsu binarization can make binary images that have the invariant characteristic in brightness and contrast changes. From edge and multi-level binary images obtained by the threshold method, we compute the 17 dimensional Hu moment and then extract feature vector using LDA algorithm. Especially, our face recognition system is robust to scale, rotation, and translation changes because of using Hu moment. Experimental results showed that our method had almost a superior performance compared with the conventional well-known principal component analysis (PCA) and the method combined PCA and LDA in the perspective of brightness, contrast, scale, rotation, and translation changes with Olivetti Research Laboratory (ORL) database and the AR database.