• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제25회 추계학술대회논문집
• /
• pp.224-228
• /
• 2005

동적 감쇠자로서 백홀에 대한 동적 제어 테스트를 수행하였다. 공급라인에서 압력 섭동에 의해 발생되는 가진과 스월 인젝터의 내부 파동 분석을 위해 수력학적 진동발생기와 1차원 가시화 모델 인젝터가 제작되었다. 음향학적 대신에 동적 감쇠자로서 백홀의 영향에 초점을 두었기 때문에 액막의 분열길이와 액막 두께를 측정하여 정상 상태와 가진 상태의 결과를 비교하였다.

• 센서학회지
• /
• 제21권3호
• /
• pp.235-239
• /
• 2012

This paper presents frequency response compensation technique, and a self-oscillation circuit for capacitive microresonator with the compensation technique using programmable capacitor array, to compensate for the frequency response distorted by parasitic capacitances, and to obtain stable oscillation condition. The parasitic capacitances between the actuation input port and capacitive output port distort the frequency response of the microresonator. The distorted non-ideal frequency response can be compensated using two programmable capacitor arrays, which are connected between anti-phased actuation input port and capacitive output port. The simulation model includes the whole microresonator system, which consists of mechanical structure, transimpedance amplifier with automatic gain control, actuation driver and compensation circuit. The compensation operation and oscillation output of the system is verified with the simulation results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 A
• /
• pp.230-233
• /
• 2003

This paper describes the design of torsional oscillation controller in HVDC system using the universal SSR eigenvalue program. The suggested design procedures consist of three steps. Fist step is to identify the characteristics of AC system with torsional modes and HVDC system; then, to determine the control parameters of the suggested torsional oscillation controller (SSRStab) to compensate the phasor lagging due to rectifier controller. Finally, using time-domain simulation program verifies the designed parameters and determine the appropriate gain. The suggested method is simple to tune the parameters and effective to damp the least stable torsional oscillation mode.

• KIEE International Transactions on Power Engineering
• /
• 제3A권2호
• /
• pp.109-114
• /
• 2003

This paper presents observations made on four-bundled conductor transmission lines concerning the behavior of conductors under the effect of natural winds. To know the wind-induced vibration status and how to control it, wind-induced vibrations have been recorded and analyzed from the real transmission lines. From the field observation and analysis results, subspan oscillation was found to be the main type of vibration. In addition, the data also revealed some common characteristics of the observation sites with high maintenance rates. The results will be used in controlling the subspan oscillations and protecting the conductors.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 춘계학술대회 논문집
• /
• pp.177-180
• /
• 2009

직경 대 길이비(L/D)의 값이 큰 고체 추진기관에서는 축방향 연소불안정 현상이 발생할 가능성이 높다. 일반적으로 이러한 현상을 억제하기 위해 추진제에 금속입자를 포함시키거나 그레인 설계시 축방향 압력 진동을 억제할 수 있도록 형상을 고안한다. Slotted-Tube형 그레인을 적용한 고체 추진기관은 연소시 Slot의 영향으로 인해 축방향 압력진동이 억제되나 Slot의 길이가 짧을 경우 연소 중반이후부터 실린더부의 영향으로 축방향 압력진동이 증폭될 수 있다. 본 연구에서는 230mm급 고체 추진기관의 연소 시험 결과 중 압력에 대해 스펙트럼 분석 및 음향모드 해석을 수행하여 축방향 압력 진동 현상을 분석하였다.

• 전기학회논문지
• /
• 제61권3호
• /
• pp.384-393
• /
• 2012

Railroad signaling systems perform controlling the distance and routes between trains. Signaling methods on the wayside are to control passively the train speed by using signal flags which are installed on the wayside. ATS(Automatic Train Stop) device is used as the signaling method on the wayside in Korea. The ATS device is assistance equipment of engineers. Signal information is transmitted by combining mutual inductance between the wayside transmitter and on-board receiver. The wayside transmitter performs changing oscillation frequency according to the signal information. The on-board receiver performs controlling the train by receiving the frequency. Currently, the oscillation frequency on the on-board receiver is 78[kHz] in case of normal state. When the on-board receiver is over the wayside transmitter, the oscillation frequency is changed by capacitors of the wayside transmitter according to signal flags. In case of changing the oscillation frequency, the waveform is modified in the wayside transmitter and on-board receiver. This phenomenon is that other signals or communication frequency are included. In this paper, electric model between the wayside transmitter and on-board receiver is suggested and frequency response in the wayside transmitter and on-board receiver including other signals is estimated by the coupling coefficient. Also, the value of coupling coefficient is proposed to exclude other signals and demonstrated by using Matlab and PSpice program.

• 대한전기학회논문지:전력기술부문A
• /
• 제49권5호
• /
• pp.226-232
• /
• 2000

This paper presents application results of the augmented matrix eigen-sensitivity theories to TCSC siting problem for damping the inter-area low frequency oscillation in the large KEPCO system. First and second-order eigen-sensitivities of the inter-area low frequency oscillation in the large KEPCO system. First and second-order eigen-sensitivities of the inter-area mode are computed fro changes in susceptance of the transmission lines. The lines having high sensitivity are chosen as the initial candidates for installing TCSC. Then for each of the chosen candidates, Bodeplot of the transfer function with line susceptance as the input and the bus voltage at one side of the line as the output is computed. Using the Bode plots, the lines having any zeros near the inter-area mode are screened out since design of TCSC controller is very difficult in such a case. The $H_{\infty}$ TCSC controller installed at any finally chosen candidate is found to be effective in damping the inter-area oscillation, and the proposed TCSC siting algorithm is proved to be valid. Design of $H_{\infty}$ controller is described in Part IIof this paper.

• 대한기계학회논문집B
• /
• 제20권7호
• /
• pp.2397-2408
• /
• 1996

A numerical study was made of the control of transient oscillatory flow modes in Czochralski convection. The reduction of temperature oscillation was achieved by changing the rotation rate of crystal rod, .OMEGA.$_{S}$=.OMEG $A_{S0}$(1+ $A_{S}$sin(2.pi. $f_{S}$/ $t_{p}$t)). The temporal behavior of oscillation flow was scrutinized over broad ranges of two parameters, i.e., the rotation amplitude( $A_{S}$.leq.0.5) and the nondimensional frequency (0.9.leq. $f_{S}$.leq.1.5). The mixed convection parameter was ranged 0.225.leq.Ra/PrR $e^{2}$.leq.0.929, which encompassed the buoyancy-and forced-dominant convection regimes. Computational results revealed that the temperature oscillations could be reduced effectively by a proper adjustment of the control parameters. The uniformity of temperature distribution near the crystal rod was examined. The control of oscillatory flow modes was also made for a realistic, low value of Pr.

• Journal of Electrical Engineering and Technology
• /
• 제9권1호
• /
• pp.27-36
• /
• 2014

This paper presents an adaptive wide-area damping controller (WADC) based on generalized predictive control (GPC) and model identification for damping the inter-area low frequency oscillations in large-scale inter-connected power system. A recursive least-squares algorithm (RLSA) with a varying forgetting factor is applied to identify online the reduced-order linearlized model which contains dominant inter-area low frequency oscillations. Based on this linearlized model, the generalized predictive control scheme considering control output constraints is employed to obtain the optimal control signal in each sampling interval. Case studies are undertaken on a two-area four-machine power system and the New England 10-machine 39-bus power system, respectively. Simulation results show that the proposed adaptive WADC not only can damp the inter-area oscillations effectively under a wide range of operation conditions and different disturbances, but also has better robustness against to the time delay existing in the remote signals. The comparison studies with the conventional lead-lag WADC are also provided.

• Journal of Power Electronics
• /
• 제10권2호
• /
• pp.132-137
• /
• 2010

Interleaving techniques are widely used to reduce input/output ripples and to increase the power capacity of boost converters operating in critical conduction mode. Two types of phase-shift control schemes are studied in this paper, the turn-on time shifting method and the turn-off time shifting method. It is found that although the turn-off time shifting method exhibits better performance, it suffers from sub-harmonic oscillations at high input voltages. To solve this problem, an intensive quantitative analysis of the sub-harmonic oscillation phenomenon is made in this paper. Based upon that, a novel modified turn off time shifting control scheme for interleaved boost converters operating in critical conduction mode is proposed. An important advantage of this scheme is that both the master phase and the slave phase can operate stably in critical conduction mode without any oscillations in the full input voltage range. This method is implemented with a FPGA based digital PWM control platform, and tests were carried out on a two-phase interleaved boost PFC converter prototype. Experimental results demonstrated the feasibility and performance of the proposed phase-shift control scheme.