• Journal of Mechanical Science and Technology
• /
• v.20 no.1
• /
• pp.19-28
• /
• 2006

This paper describes rapid prototyping (RP) and reverse engineering (RE) application for orthopedic surgery planning to improve the efficiency and accuracy of the orthopedic surgery. Using the symmetrical characteristics of the human body, CAD data of undamaged bone of the injured area are generated from a mirror transformation of undamaged bone data for the uninjured area. The physical model before the injury is manufactured from Poly jet RP process. The surgical plan, including the selection of the proper implant, pre-forming of the implant and decision of fixation positions, etc., is determined by a physical simulation using the physical model. In order to examine the applicability and efficiency of the surgical planning technology, two case studies, such as a distal tibia comminuted fracture and an iliac wing fracture of pelvis, are carried out. From the results of the examination, it has been shown that the RP and RE can be applied to orthopedic surgical planning and can be an efficient surgical tool.

• Clinics in Shoulder and Elbow
• /
• v.26 no.4
• /
• pp.445-454
• /
• 2023

The Latarjet procedure is a surgical procedure that can effectively restore glenohumeral stability, especially in patients with anterior shoulder instability and glenoid bone loss. Many studies have shown comparable clinical outcomes between patients undergoing the arthroscopic Latarjet procedure and those undergoing traditional open methods or other glenohumeral joint stabilization procedures. However, the arthroscopic Latarjet procedure is a challenging technique due to the unfamiliar portal placements, proximity of neurovascular structures, and serious postoperative complications. The arthroscopic Latarjet procedure has not yet been widely applied, and a clear understanding of the anatomical structure and the precise methods is required prior to operation performance. Satisfactory clinical outcomes can be achieved by thorough preoperative planning and proper implant fixation methods.

• Proceedings of the ESK Conference
• /
• 1992.10a
• /
• pp.54-62
• /
• 1992

This work has been directed at studying and developing a prototype Computer Aided Design(CAD) tool to be used for planning tendon paths in hand reconstructive surgery. The application of CAD to rehabilitative surgery of the hand is a new field of endeavor. There are currently no existing systems designed to assist the orthopedic surgeon in planning these complex peocedures. Additionally, orthopedic surgeons are not trained in mechanics, kinematics, math modeling, or the use of computers. It was also our intent to study the mechanisms and the efficacy of the application of CAD techniques to this important aspect of hand surgery. The following advances are reported here: Interactive 3D tendon path definition tools., Software to calculate tendon excursion from an arbitrary tendon path crossing any number of joints., A model to interactively compute and display the foirces in muscle and tendon., A workstation environment to help surgeons evaluate the consequences of a simulated tendon transfer operation when a tendon is lengthened, rerouted, or reattached in a mew location., It also has been one of the primary concerns in this work that an interactive graphical surgical workstation must present a natural, user-friendly environment to the orthopedic durgeon user. The surgical workstation must ultimately aid the surgeon in helping his patient or in doing his work more efficiently or more reliably.

• Journal of the Korean Orthopaedic Association
• /
• v.56 no.2
• /
• pp.117-124
• /
• 2021

Although current surgical techniques have reduced the incidence of malunion, it is still observed because of the complexity of the fracture or associated injuries. Osteotomy is needed when the amount of malunion is expected to result in an overload of cartilage and instability of the joint. Preoperative planning is essential when performing an osteotomy for malunion. Inadequate planning can result in serious complications, such as iatrogenic malalignment, intraoperative fracture, postoperative recurrence of deformity, or soft tissue injuries. In addition, a poor functional result can occur secondary to poor patient selection. This review article includes the surgical indications and planning to correct malunion. Various methods of corrective osteotomy are described according to the kinds of plane and fixation implants.

• Clinics in Shoulder and Elbow
• /
• v.25 no.4
• /
• pp.288-295
• /
• 2022

Background: There is no standardized therapeutic strategy for locked posterior shoulder fracture-dislocation (PSFD), and no consensus exists on the analysis of preoperative factors. This retrospective study aimed to evaluate functional results and complications in a series of PSFD cases managed with open surgical treatment. Methods: Patients diagnosed with locked PSFD who underwent open surgical treatment with reduction and osteosynthesis between April 2016 and March 2020 were included. All participants were treated with open reduction and internal fixation. Functional assessment used the modified University of California, Los Angeles (UCLA) mod scale, American Shoulder and Elbow Surgeons (ASES) questionnaire, subjective shoulder value (SSV), and visual analog scale (VAS). Complications were evaluated clinically and radiologically by X-ray and computed tomography. Results: Twelve shoulders were included (11 patients; mean age, 40.6 years; range, 19- 62 years). The mean follow-up duration was 23.3 months (range, 12-63 months). The UCLA mod, ASES, SSV, and VAS scores were 29.1±3.7, 81.6±13.5, 78±14.8, and 1.2±1.4 points, respectively. The overall complication rate was 16.6%, with one case of post-traumatic stiffness, 1 case of chronic pain, and no cases of avascular necrosis. Conclusions: Open surgical treatment of locked PSFD can achieve good functional results. A correct understanding of these injuries and good preoperative planning helped us to achieve a low rate of complications.

• Archives of Hand and Microsurgery
• /
• v.22 no.3
• /
• pp.137-146
• /
• 2017

Brachial plexus injury is regarded as one of the most devastating injuries of the upper extremity. Accurate diagnosis is important to obtain the successful results. Basic preoperative evaluation includes simple radiography, cervical myelography. Magnetic resonance imaging, angiography, electrophysiologic studies and intraoperative studies. Furthermore, proper timing of surgery, surgical indication, plan and sufficient understanding of patients about the prognosis are the key for the satisfactory outcomes. This article provides an overview of the evaluation, diagnosis, intraoperative monitoring, and proper surgical planning for the treatment of posttraumatic brachial plexus injuries.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.8
• /
• pp.126-131
• /
• 2009

Acetabular dysplasia is a condition defined by inadequate development of an individual's acetabulum. Individual diversity of the symptoms in this disease needs safe and accurate preoperative planning. Technologies that utilize multidimensional image information are thus important. The assessment method by Janzen et al. was suggested a coefficient method in evaluation of acetabular dysplasia. In this study, we applied it, using a three-dimensional computed tomography (3D CT) on the koreans. 19 cases of the normal hips and 4 cases of the acetabular dysplasia were investigated to evaluate the proved method; 3D CT was used to define the geometric center of the femoral head and to measure center edge angles at $10^{\circ}$ rotational increments around the acetabular rim. Mean and standard deviation in CEAs (Center Edge Angle) of normal 19 hips at $10^{\circ}$ rotational increments from anterior to posterior rim were determined, and termed as a 'normal curve'. Then this normal values were compared with the CEA data measured from 4 cases of acetabular dysplasia patiens. Quantative comparison of the CEA values between the normal cases and dysplasia cases was successfully demonstrated, and thus, we claim that this simple CT method of assessing acetabular dysplasia can be well applicable to diagnosis, quantification and surgical planning for adult acetabular dysplasia patients.

• Journal of the Korean Orthopaedic Association
• /
• v.56 no.2
• /
• pp.103-116
• /
• 2021

The use of 3-dimensional (3D) printing is becoming more common, and its use is increasing in the orthopedic surgery. Currently, there are four major methods of using 3D printing technology in orthopedic surgery. First, surgical planning simulation using 3D printing model; second, patient-specific surgical instruments; third, production of customized prosthesis using 3D printing technique; fourth, patient-specific prosthesis produced by 3D printing. The areas of orthopedic surgery where 3D printing technology can be used are shoulder joint, spine, hip and pelvis, knee joints, ankle joint, and tumors. Since the diseases and characteristics handled by each area are different, the method of using 3D printing technology is also slightly different in each area. However, using 3D printing technology in all areas can increase the efficiency of surgery, shorten the surgery time, and reduce radiation exposure intraoperatively. 3D printing technology can be of great help in treating patients with particularly complex and difficult orthopedic diseases or fractures. Therefore, the orthopedic surgeon should make the most of the benefits of the 3D printing technology so that patient can be treated effectively.

• Journal of Korean Foot and Ankle Society
• /
• v.21 no.4
• /
• pp.122-127
• /
• 2017

This paper reviews the indications and surgical technique of supramalleolar osteotomy as one of the treatments for moderate degenerative ankle osteoarthritis. Although it is technically demanding and requires extensive preoperative planning, supramalleolar osteotomy will be a good treatment option for moderate degenerative ankle osteoarthritis. The osteotomy is designed to shift the weight bearing axis to the lateral side of the ankle joint and unload the medial side of the joint. In our experience, a supramalleolar osteotomy is effective to the treatment of moderate ankle osteoarthritis with a small amount of preoperative talar tilt and varus or normal heel alignment.

• Journal of Korean Foot and Ankle Society
• /
• v.26 no.2
• /
• pp.59-65
• /
• 2022

The posterior malleolar fracture is relatively common fracture of the foot and ankle, but several aspects of this are still controversial. If the posterior malleolus is involved in the ankle fracture, the prognosis is usually poor. A computed tomography scan is essential for accurate diagnosis and treatment planning. Although indirect reduction and the anterior to posterior screw fixation technique have the advantages of a small incision with the requirement of relatively simple skills, direct open reduction and fixation from the posterior side provide a more biomechanically stable and accurate reduction. The precise reduction of the posterior malleolar fragment helps to achieve congruency of the tibia and fibula in the incisura and contributes to syndesmotic stability. It is important to determine the indications for surgical treatment by comprehensively evaluating the three-dimensional structure of the posterior malleolar fracture and all related injuries to the ankle.