• 한국항공우주학회지
• /
• 제47권4호
• /
• pp.256-265
• /
• 2019

본 논문에서는 평직물 CFRP로 제작한 직교 격자 쉘의 굽힘 하중에 의한 점진적 손상 연구를 수행하였다. 직교 격자는 복합재 바닥면과 함께 경화하여 제작하였다. 굽힘을 받는 직교 격자 쉘의 점진적 손상 해석은 Hashin-Rotem 파손 기준과 Matzenmiller-Lubliner-Taylor (MLT) 모델으로 비선형 유한요소법을 이용하여 수행하였다. 또한, 직교 격자 쉘에 대한 3점 굽힘 시험을 수행하였으며, 시험 결과와 해석 결과를 비교하였다. 변형률과 변위에 대한 시험과 해석 결과는 유사하게 나타났다. 손상 영역은 점진적 손상 해석으로 예측하였으며, 육안 검사와 초음파 비파괴 검사를 통해 측정한 결과와 비교하였다.

• 대한기계학회논문집A
• /
• 제32권9호
• /
• pp.788-795
• /
• 2008

To understand the tensile behaviors of GFRP at low temperature, three types of specimen have been used in this study. Tensile properties and fracture mechanisms for three orthogonal orientations of plain weave glass fabric reinforced epoxy resin laminate were investigated at temperature range of about -30 to $15^{\circ}C$. The tensile properties of axial and edge type specimen decrease slightly with decreasing temperature to $-20^{\circ}C$. However, at $-30^{\circ}C$ the decreases in the tensile properties increased considerably. Below $-20^{\circ}C$, thickness type specimen showed a marked decreases in the tensile properties. It was obvious that the fracture manner of thickness type specimen was adhesive failure at above $-10^{\circ}C$ and a mixed adhesive and cohesive failure at below $-20^{\circ}C$.

• 한국자동차공학회논문집
• /
• 제17권3호
• /
• pp.15-21
• /
• 2009

The anisotropic mechanical properties were measured for the three orthogonal orientations of plain weave glass fabric reinforced epoxy resin laminate. In tensile and flexural tests, axial and edge type specimens failed by pull-out of warp and fill yarns, respectively. In contrast, the thickness type specimens failed by adhesive failure process. Longitudinal cracking occurred in several of the edge type specimens during tensile test. That cracking caused pop-in in the stress-strain curve. Defects induced by improper coupon machining caused that cracking.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 추계학술발표대회 논문집
• /
• pp.91-94
• /
• 2003

Laminated composites are liable to fatal damage under impact load due to the fact that they have no reinforcement in the thickness direction. To overcome the inherent weakness, three dimensional (3D) textile reinforcements have drawn much interests. In this paper, impact performance of 2D and 3D textile composites has been characterized. For 2D composites, fiber bundle size and fiber pattern have been varied. For 3D composites, orthogonal woven preforms of different density and type of through-thickness fibers have been studied. To assess the damage after the impact loading, specimens were subjected to C-scan nondestuctive inspection. Compression after impact (CAI) were also conducted in order to evaluate residual compressive strength.