• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.9
• /
• pp.1278-1284
• /
• 2000

An experiment was performed to evaluate different methods for preserving shrimp by-products and to determine their chemical composition. In the first experiment three ratios of shrimp by-product (SBP) to molasses (6:1, 4:1 and 3:1, wet weight), and to cassava root meal (3:1, 2:1 and 1:1, wet weight of shrimp by-product and air-dry weight of cassava root meal) were investigated. The pH of the SBP ensiled with molasses at a ratio of 3:1, and with cassava root meal at a ratio of 1:1, decreased during the first week to below 4.5 and remained low up to day 56 of ensiling, whereas the pH of the mixtures with higher ratios of SBP remained above 7.0, and the material deteriorated rapidly. The dry matter decreased initially in all treatments but then increased slightly from day 28 in the treatment where shrimp by-product was ensiled with cassava root meal at a ratio of 1:1. The crude protein (CP) and ammonia-N $(NH_3-N)$ contents of the preserved shrimp by-product material ensiled with molasses at a ratio of 3:1 increased significantly one week after ensiling. The CP content then remained constant, while the $NH_3-N$ concentration continued to increase up to 56 days after ensiling. When SBP was ensiled with cassava root meal at a ratio of 1:1 the CP content of the silage increased significantly up to 21 days after ensiling and then decreased back to the original level after 56 days, whereas $NH_3-N$ increased markedly up to 14 days and then remained fairly constant up to 56 days. However, the $NH_3-N$ content was significantly higher when SBP was ensiled with cassava root meal than with molasses. A balance experiment was carried out, arranged as a double Latin-square and including 6 F1 (Large White ${\times}$ Mong Cai) castrates fed randomly one of three diets based on cassava root meal, rice bran, and fish meal (FM) or shrimp by-product ensiled with molasses (SBEMO) or with cassava root meal (SBECA) as the main protein source. Apparent organic matter and CP digestibilities were significantly (p<0.001) higher for the fish meal diet than for the two shrimp by-product diets, although CP digestibility in SBEMO and SBECA was similar (p>0.05). N-retention was significantly higher for the fish meal diet than for the SBEMO diet, which in turn was significantly higher than for the SBECA diet (p<0.01). It can be concluded that shrimp by-product can be preserved by ensiling with molasses at a ratio of 3:1 or with cassava root meal at a ratio of 1:1. Nutrient digestibility and N-retention of diets based on these shrimp by-product silages were lower than for similar diets based on fish meal, probably due to their high chitin content and inferior amino acid balance.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.173-173
• /
• 2010

$Bi_4Ti_3O_{12}$ ($B_4T_3$) is a unique ferroelectric material that has a relatively high dielectric constant, high Curie temperature, high breakdown strength, and large spontaneous polarization. As a result this material has been widely studied for many applications, including nonvolatile ferroelectric random memories, microelectronic mechanical systems, and nonlinear-optical devices. Several reports have appeared on the use of Mn dopants to improve the electrical properties of $B_4T_3$ thin films. Mn ions have frequently been used for this purpose in thin films and multilayer capacitors in situations where intrinsic oxygen vacancies are the major defects. However, no systematic study of the optical properties of $B_4T_3$ films has appeared to date. Here, we report optical data for these films, determined by spectroscopic ellipsometry (SE). We also report the effects of thermal annealing and Mn doping on the optical properties. The SE data were analyzed using a multilayer model that is consistent with the original sample structure, specifically surface roughness/$B_4T_3$ film/Pt/Ti/$SiO_2$/c-Si). The data are well described by the Tauc-Lorentz dispersion function, which can therefore be used to model the optical properties of these materials. Parameters for reconstructing the dielectric functions of these films are also reported. The SE data show that thermal annealing crystallizes $B_4T_3$ films, as confirmed by the appearance of $B_4T_3$ peaks in X-ray diffraction patterns. The bandgap of $B_4T_3$ red-shifts with increasing Mn concentration. We interpret this as evidence of the existence deep levels generated by the Mn transition-metal d states. These results will be useful in a number of contexts, including more detailed studies of the optical properties of these materials for engineering high-speed devices.

• Journal of Conservation Science
• /
• v.33 no.3
• /
• pp.155-165
• /
• 2017

As interest in the public display of art and outdoor sculptures is increasing, the conservation and treatment of these sculptures is becoming increasingly crucial. Long-term exposure to the natural elements and atmospheric pollution can cause corrosion and deterioration in outdoor sculptures. In the case of Kim Chan Shik's "Feeling", which was exhibited in the outdoor sculpture park at the National Museum of Modern and Contemporary Art (MMCA), the patina of the sculpture was damaged during a long outdoor exhibition. Therefore, the treatment process was as follows: recording of condition, sanding, repatination, and wax coating. Consequently, the sculpture was restored similar to the original. Chemical analysis revealed that the sculpture was crafted from bronze and was cast from a quaternary alloy of Cu-Pb-Sn-Zn. The welding is lower in Zn, Sn, and Pb content than the metal used in the sculpture itself. Bright strains contain about 13.0 wt% Sn and 10.5 wt% Pb. The strains are higher in Sn and Pb content than the rest of the metal in the sculpture (7.0 wt% Sn and 4.4 wt% Pb). As a result of component analysis and microstructure observation, the material is estimated to have been made by casting without artificial treatment.

• Journal of the Mineralogical Society of Korea
• /
• v.18 no.2
• /
• pp.127-134
• /
• 2005

Although the bulk composition of materials is one of the major considerations in extractive metallurgy and environmental science, surface composition and topography control surface reactivity, and consequently play a major role in determining metallurgical phenomena and pollution by heavy metals and organics. An understanding of interaction mechanisms of different chemical species at the mineral surface in an aqueous media is very important in natural environment and metallurgical processing. X-ray photoelectron spectroscopy (XPS) has been used as an ex-situ analytical technique, but the material to be analyzed can be any size from $100\;{\mu}m$ up to about 1 cm. It can also measure mixed solids powders, but it is impossible to ascertain the original source of resulting x-ray signals where they were emitted from, since it radiates and scans the macro sample surface area. The study demonstrated the ability of TOF-SIMS to detect individual organic species on the surfaces of mineral particles from plant samples and showed that the TOF-SIMS techniques provides an excellent tool for establishing the surface compositions of mineral grains and relative concentrations of chemicals on mineral species.

• Analytical Science and Technology
• /
• v.23 no.2
• /
• pp.109-118
• /
• 2010

Amended at the Law of indoor air quality management open a court according to the test method and excess standard of the fluid building material were changed. It used the paint and the putty in the fluid building material from this research and comparison of amended and original method it led and in about change direction of amended standard with change of the emission rate who is caused by in the amended test method and excess standard it examined. The reduction emission rate about 45% decreases in the change of test period of the paint, there was not an effect of the emission rate whom it follows in change of dry time. Also change of the emission rate whom it follows in change of application quantity the product which above $5\;mg/m^2h$ has the high emission rate the change of the emission rate is big but there was not change of the emission rate from the products of that others. The putty the emission rate about 61% decreases in case in the change of test period, there was not an effect of the emission rate whom it follows at dry time. The emission rate about 164% increased with increase of application quantity. It tried to compare two test methods, it compared in the paint and putty all current test method it was relaxed the possibility of knowing the thing there was a standard.

• International Journal of Advanced Culture Technology
• /
• v.3 no.1
• /
• pp.21-30
• /
• 2015

Ceramic foams are prepared as positive images corresponding to a plastic foam structure which exhibits high porosities (85-90%). This structure makes the ceramic foams attractive as a catalyst in a dry reforming process, because it could reduce a high pressure drop problem. This problem causes low mass and heat transfers in the process. Furthermore, the reactants would shortly contact to catalyst surface, thus low conversion could occur. Therefore, this research addressed the preparation of dry reforming catalysts using a sol-gel catalyst preparation via a polymeric sponge method. The specific objectives of this work are to investigate the effects of polymer foam structure (such as porosity, pore sizes, and cell characteristics) on a catalyst performance and to observe the influences of catalyst preparation parameters to yield a replica of the original structure of polymeric foam. To accomplish these objectives industrial waste foams, polyurethane (PU) and polyvinyl alcohol (PVA) foams, were used as a polymeric template. Results indicated that the porosity of the polyurethane and polyvinyl alcohol foams were about 99% and 97%. Their average cell sizes were approximate 200 and 50 micrometres, respectively. The cell characteristics of polymer foams exhibited the character of a high permeability material that can be able to dip with ceramic slurry, which was synthesized with various viscosities, during a catalyst preparation step. Next, morphology of ceramic foams was explored using scanning electron microscopy (SEM), and catalyst properties, such as; temperature profile of catalyst reduction, metal dispersion, and surface area, were also characterized by $H_2-TPR$ and $H_2-TPD$ techniques, and BET, respectively. From the results, it was found that metal-particle dispersion was relatively high about 5.89%, whereas the surface area of ceramic foam catalysts was $64.52m^2/g$. Finally, the catalytic behaviour toward hydrogen production through the dry reforming of methane using a fixed-bed reactor was evaluated under certain operating conditions. The approaches from this research provide a direction for further improvement of marketable environmental friendly catalyst production.

• Korean Journal of Food Science and Technology
• /
• v.33 no.1
• /
• pp.19-23
• /
• 2001

Physicochemical properties including viscosity, temperature and pH stability, color turbidity and moisture retention power of xylooligosaccharide(XO) as food material were investigated to apply to food process. The viscosity of 70 bx XO was 930 cP at $20^{\circ}C$ and 90 cP at $60^{\circ}C$, which was higher than that of sugar but lower than that of other oligosacchrides. XO remained stable after heat treatment for 1hr at $100^{\circ}C$ and pH 2.5 to 8.0 indicating excellent heat and pH stability. The pH of XO was measured $5.0{\pm}0.1$ and the color turbidvity of XO was very low at pH $2.5{\sim}4.0$. The color turbidity of XO increased as pH increased, but it was not high enough to affect food process. When heated with 1% glycine the color turbidity of XO was very low and changed little with pH changes. To measure moisture retention power XO was stored at $25^{\circ}C$ and 75% relative humidity for 71 day. XO retained more than 95% of the original weight; whereas sugar lost 28%. These results suggest that XO has useful physicochemical properties for various food process to improve the functionality of food.

• Journal of Sasang Constitutional Medicine
• /
• v.13 no.2
• /
• pp.8-27
• /
• 2001

1. Purpose This paper was written in order to understand the concept of ${\ulcorner}$DongMuYooGo YakSungGa${\lrcorner}$ (東武遣稿 藥性歌) which was descending as the material of Sasang pharmacology. So we are planning to make use of the fundamental material of the study on the Sasang Medications and Prescriptions. 2. Methods Through comparing each clause of ${\ulcorner}$DongMuYooGo YakSungGa${\lrcorner}$ on all the sasang -records, we understood that concept. 3 Result 1) ${\ulcorner}$DongMuYooGo YakSungGa${\lrcorner}$ of a literary work of DongMu(東武) which contain special elucidative-method of herb-nature has 18 type of YakSungGa which explain each 27 herbs for the Taeeumin, Soyangin and Soeumin. The period of authoship is supposed to the time just before ${\ulcorner}$DongyiSuseBowon Gabobon${\lrcorner}$ (東醫壽世保元 甲午本)(1894, DongMu 58 years old) or middle of fifties(53-57 years old). 2) YakSungGa of ${\ulcorner}$DongMuYooGo${\lrcorner}$ which is published by the BoGunsung(保健省) of North Korea is supposed to close to original type. The main meaning of that is the herb-nature which works on the weakst point of each Sasangin. And then the herbs were classfied by the diseases and symptoms possessing Bomyungjiju(保命之主), the herb's efficacy is explained at the each constitution. 3) The meaning of ${\ulcorner}$DongMuYooGo YakSungGa${\lrcorner}$ is exposure of the opinion of DongMu's early stage that proposed herb-nature which is applied to the principle of Jang(臟) of Sasangin, reason and purpose to enact newly created prescriptios by the constitutional diseases and symptoms, and the compositional principle of newly created prescription. 4) The selection of herbs or cogution of herb-nature of DongMu's pharmacological opinion of his early stage was changed by accumulating clinical experience. So all the newly created prescriptios of ${\ulcorner}$DongyiSuseBowon${\lrcorner}$ could not be explained by only the herb and the herd-nature on ${\ulcorner}$DongMuYooGo YakSungGa${\lrcorner}$. Therefore the purpose of DongMu's YaksungGa is not explaining the symptoms in charge of each herb or classifying the herb by constitution, but offering the principle of composition of prescription of Sasang, from the necessary herb which possess and expand Bomyungjiju to nature of herb which is applied to the constitution for treating all the diseases and sypmtoms by the heavy or light and slow or speedy.

• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 1994.06a
• /
• pp.11-26
• /
• 1994

Crown gall of stonefruit and nut trees is one of the very few plant diseases subject to efficient biological control. The disease is caused by the soil-inhabiting bacteria Agrobacterium tumefaciens and Agrobacterium rhizogenes and the original control organism was a non-pathogenic isolate of A. rhizogenes strain K84. Control is achieved by dipping planting material in a cell suspension of strain K84 which specifically inhibits pathogenic strains containing a nopaline Ti plasmid. Because the agrocin 84-encoding plasmid (pAgK84) is conjugative, it can be transmitted from the control strain to pathogenic strains which, as a result, become immune to agrocin 84 and cannot be controlled. To prevent this happening, the transfer genes on pAgK84 were located and then largely eliminated by recombinant DNA technology. The resulting construct, strain K1026, is transfer deficient but controls crown gall just as effectively as does strain K84. Field data from Spain confirm that pAgK84 can transfer to pathogenic recipients from strain K84 but not from strain K1026. The latter has been registered in Australia as a pesticide and is the first genetically engineered organism in the world to be released fro commercial use. It is recommended as a replacement for strain K84 to prevent a breakdown in the effectiveness of biological control of crown gall. Several reports indicate that both strains K84 and K1026 sometimes control crown gall pathogens that are resistant to agrocin 84. A possible reason for this is that both strains produce a second antibiotic called 434 which inhibits growth of nearly all isolates of A. rhizogenes, both pathogens and non-pathogens. Crown gall of grapevine is caused by another species, Agrobacterium vitis. It is resistant to agrocin 84 and cannot be controlled by strains K84 or K1026. It is different from other crown gall pathogens in several characteristics, including the fact that, although a rhizosphere coloniser, its also lives systemically in the vascular tissue of grapevine. Pathogen free propagating material can be obtained from tissue culture or, less surely, by heat therapy of dormant cuttings. A number of laboratories are searching for a biocontrol strain that will prevent, or at least delay, reinfection. A non-pathogenic A. vitis strain F/25 from South Africa looks very promising in this regard.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.3
• /
• pp.221-230
• /
• 2018

The purpose of this study was to evaluate the effect of several chemical treatments to prevent photodegradation of wood veneer by external UV (Ultraviolet) light. Of woods, walnut veneer is selected as a raw material for this study since it is known as a luxurious wood with dark color giving an esthetic effect. Alcohol-benzene, hydrogen peroxide ($H_2O_2$) and sodium hypochlorite (NaClO) solution were used for investigate the effect on color stabilization. Despite the removal of the extractive compounds, which is known as a discoloration component, a significant color change of walnut wood veneer was observed. Meanwhile, the veneers treated by 20 and 30% $H_2O_2$ solution at $75^{\circ}C$ for 1 h also showed the no positive effect of color stability exposed to UV light although they have a bleaching effect on wood veneer. Besides, it was difficult to maintain the original color of walnut veneer due to the elution of the extractive compounds. On the other hands, the veneer treated by NaClO solution indicated the good performance on color stability despite of the intensive UV light test. However, when the concentration exceeds 3%, surface roughness and fiber damage occurred simultaneously. Therefore, the walnut species should be treated with proper concentration when sodium hypochlorite is applied to the veneer.