• 박물관보존과학
• /
• 제5권
• /
• pp.17-22
• /
• 2004

일제시대에 발굴되어 여러 편으로 분리되어 있던 철제용기를 보존처리하였다. 보존처리를 통하여 유물을 안정화시키고, 본래의 형상을 복원하였다. 보존처리 결과 철제용기는 굽이 있으며 구연부에 턱이 있고 안으로 오므라드는 유선형이었다. X-선 투과검사 결과 주조과정에서 기공이 많이 발생한 것이 관찰되었으며, 금속조직을 통해 재질이 초정흑연을 가진 과공정 백주철임을 알 수 있었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 제17회 워크샵 및 추계학술대회
• /
• pp.554-557
• /
• 2005

The bipolar plate is a major component of the PEM fuel cell stack, which takes a large portion of stack cost. In this study, as alternative materials for bipolar plate of PEM fuel cells, graphite composites were fabricated by compression molding. Graphite particles mixed with epoxy resin were used as the main substance to provide electric conductivity. To achieve desired electric properties, specimens made with different mixing ratio, processing pressure and temperature were tested. To increase mechanical strength, one or two layer of woven carbon fabric were added to the original graphite and resin composite. Thus, the composite material is consisted of the three phases: graphite particles, epoxy resin, and carbon fabric. By increasing mixing ratio, fabricated pressure and process temperature, electric conductivity was improved. The results of tensile test showed that the tensile strength of two-phase graphite composite was about 5MPa, and that of three-phase composite was increased to 54MPa.

• 기술사
• /
• 제17권4호
• /
• pp.40-49
• /
• 1984

The first national QC Circle Convention sponsored by Industry Advancement Administration in 1975 was the beginning of employees group activity from a national point of view. Subsequently some events such as the firs Nationwide Factory Seamaul activity small Group Convention, which was supervised by the ministry of Trading and Industry and Factory Seamaulundong promotion Center, paved the way for proliferation of the group activity through all kinds of manufacturing. Although since November 1982 these two conventions has been united, many problems have been disclosed that are against the basic principles more or less. Worker's group activity is, essentially, a trouble shooting oriented voluntary small group within their working place to improve the surroundings creatively. In practice, however, many groups are so typical and so impetuous of the material effect that it is worried to be inclined to outform rather than contents. To prevent this point it is recommended that worker's group activity be promoted continuously and on the basis of the original principle of small group activity to obtain practical and rich results, and systematically to be more effective and active considering the managerial environment and the intellectual level of the consisting members.

• International Journal of Concrete Structures and Materials
• /
• 제8권1호
• /
• pp.15-26
• /
• 2014

In order to study the capacities of a new occurrence of Brazilian clay samples as partial replacements of cement, a bentonite sample was selected for utilization in the natural and modified forms for present study. The natural bentonite (BBT) was modified by anchorament of 3-aminopropyltrietoxisilane ($BBT_{APS}$) and 3,2-aminoethylaminopropyltrimetoxisilane (BBTAEAPS) in the surface of component minerals of bentonite sample. The original and organo-bentonite samples were characterized by elemental analysis, scanning electron microscopic and textural analyses. The values of micropore area were varying from $7.2m^2g^{-1}$ for the BBT to $12.3m^2g^{-1}$ for the $BBT_{AEAPS}$. The bentonite samples were characterized by the main variable proportion of bentonite in the natural and intercalated forms (2, 5, 10, 15, 20, 25, 30, and 35 % by weight of cement) in the replacement mode whiles the amount of cementations material. The workability, density of fresh concrete, and absorption of water decreased as the substitution of ordinary Portland cement by perceptual of natural and modified bentonite increased. The results reveal that workability decreased with decrease of the amount of natural bentonite in the concrete, same behavior is observed for bentonite functionalized, varying from 49 to 28 mm. The energetic influence of the interaction of calcium nitrate in the structure of blends was determined through the calorimetric titration procedure.

• Transactions on Electrical and Electronic Materials
• /
• 제14권4호
• /
• pp.187-192
• /
• 2013

Because of the importance of small target detection in infrared images, many studies have been carried out in this area. Using a Kalman filter and mean shift algorithm, this study proposes an algorithm to track multiple small moving targets even in cases of target disappearance and appearance in serial infrared images in an environment with many noises. Difference images, which highlight the background images estimated with a background estimation filter from the original images, have a relatively very bright value, which becomes a candidate target area. Multiple target tracking consists of a Kalman filter section (target position prediction) and candidate target classification section (target selection). The system removes error detection from the detection results of candidate targets in still images and associates targets in serial images. The final target detection locations were revised with the mean shift algorithm to have comparatively low tracking location errors and allow for continuous tracking with standard model updating. In the experiment with actual marine infrared serial images, the proposed system was compared with the Kalman filter method and mean shift algorithm. As a result, the proposed system recorded the lowest tracking location errors and ensured stable tracking with no tracking location diffusion.

• 한국환경복원기술학회지
• /
• 제9권3호
• /
• pp.17-25
• /
• 2006

To increase freeze-thaw resistance of porous concrete, this study examined physical properties of polymer by replacing paste used as a binding material with polymer, using unsaturated polyester and epoxy resin, and changing the mixing ratio of polymer. According to the result of this study, when the mixing ratio of resin paste to aggregates was 11 to 16%, voids volume was 33 to 37% and unit weight was about 1620 to 1720kg/$m^3$. In comparison with previous studies using cement paste, voids volume increased by about 7 to 16%, while unit weight decreased by about 100 to 300kg/$m^3$. Compressive strength was 90 to 155kg/$cm^2$ at the age of 7 days, which was 5-40kg/$cm^2$ bigger than porous concrete using cement paste. From a viewpoint of freeze-thaw resistance, it was identified that pluse velocity fell by 0.23km/sec, about 7% of the original velocity, when the cycle of freeze-thaw was repeated 300 times. In spite of 300 repetitions of the cycle, relative dynamic modulus of elasticity was more than 60%, which suggested that its freeze-thaw resistance was more excellent compared with the result that relative dynamic modulus of elasticity of porous concrete using cement paste was 60 % or less under the condition of 80 repetitions of freeze-thaw cycle.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.218-218
• /
• 2013

We report a simple and cost-effective method to fabricate transparent superhydrophobic surface on various substrates. The surface was fabricated by coating hydrophobic PDMS (polydimethylsiloxane) film on the silica nanoparticle and subsequent fixing of the hydrophobic silica nanoparticles onto substrates. The water contact angle for the prepared surface was determined to be over $150^{\circ}$, whichindicates that the surface is highly repellent to water. The hierarchical structure and roughness of the surface were examined by scanning electron microscopy (SEM) and atomic force microscopy (AFM). Additionally, transparency of the prepared surface was measured with UV-VIS spectrometer. The transmittance of the superhydrophobic surface was ~80%, which is lower than that without PDMS-coated silica by only 5 to 10%. It is also notable that the superhydrophobic surface fully recovers its original transmittance after self-cleaning process. Also the PDMS coating is stable under a wide range of pH conditions, UV radiation and salinity conditions, which is essential for the practical use. Moreover, our fabrication method is applicable in large scale production.

• 한국압력기기공학회 논문집
• /
• 제12권2호
• /
• pp.1-24
• /
• 2016

The original fracture criteria developed by Maxey/Kiefner for axial through-wall and surface-cracked pipes have worked well for many industries for a large variety of relatively low strength and toughness materials. However, newer line pipe steels have some unusual characteristics that differ from these older materials. One example is a test data that has demonstrated that X80 line-pipe with an axial through-wall-crack can fail at pressures about 30 percent lower than predicted with commonly used analysis methods for older steels. Thus, it is essential to review the currently available models and investigate the applicability of these models to newer high-strength line pipe materials. In this paper, the available models for predicting the failure behavior of axial-cracked pipes (through-wall-cracked and external surface-cracked pipes) were reviewed. Furthermore, the applicability of these models to high-strength steel pipes was investigated by analyzing limited full-scale pipe fracture initiation test results. Based on the analyzed results, the shortcomings of the available models were identified. For both through-wall and surface cracks, the major shortcomings were related to the characterization of the material toughness, which generally leads to non-conservative predictions in the J-T analyses. The findings in this paper may be limited to the test data that were consider for this study. The requisite characteristics of a potential model were also identified in the present paper.

• 지질공학
• /
• 제25권2호
• /
• pp.179-188
• /
• 2015

Although permeating injection is ideal for grouting reservoir embankments, it is usually combined with fracturing injection for grouting, which can disturb the original soil. Compaction with low expansive pressure followed by grout injection can overcome this problem. An expansive compaction (EC) packer was developed in this work to easily apply sequential injection and compaction at a work site. Furthermore, to achieve compaction around the grouting hole, a mixture of expansive admixtures and grout was injected with the EC packer to trigger an increase in volume of the grout material. This work verifies the compaction effect of the EC packer and the expansive admixture. It reports the concepts of the EC packer, the range of expansive compaction, the effectiveness of injection, and the results of indoor tests performed to verify the effectiveness of the expansive admixtures. The indoor testing comprised a preparatory test and the main test. The preparatory test assessed the admixtures for their compaction effects, while the main test measured and analyzed the admixtures' expansive force, pressure, and compaction effect with a mold to verify the effectiveness of the compaction effect.

• 한국실내디자인학회논문집
• /
• 제26호
• /
• pp.57-63
• /
• 2001

The aim of this study is to measure sensitivity reaction of human being with a physical properties of color and average size of particle for building materials and predict the influence of color and average size of particle in evaluation of building materials. As a results, 1) In results of qualitative evaluation construction, all 16 adjectives were extracted by higher evaluation items and ,total 14 adjectives were extracted as evaluation adjectives except adjectives of a contrary concept in each other. 2) According to the result of factor analysis, all 4 group of $\ulcirner$potency$\lrcirner$, $\ulcirner$activity$\lrcirner$, $\ulcirner$evaluation$\lrcirner$, $\ulcirner$warmness$\lrcirner$ were extracted. In this time, $\ulcirner$potency$\lrcirner$ as the first factor indicates the most hign original value. Consequently, $\ulcirner$potency$\lrcirner$ factor have an hign influence in evaluation of building materials. 3) As a influence analysis of evaluation variable by evaluation item $\ulcirner$potency$\lrcirner$ factor have an high influence by influence of average size of a particle, $\ulcirner$activity$\lrcirner$ factor have influence hignly by influence of brightness, $\ulcirner$evaluation$\lrcirner$ factor have an hign influence by influence of average site of a particle and the hue, $\ulcirner$warmness$\lrcirner$ factor have an hign influence mainly by influence of the hue