• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.3
• /
• pp.325-330
• /
• 2012

This paper describes the structural analysis and optimization of stiffeners used in inner tanks for liquid natural gas (LNG) storage, so that the costs can be minimized while the critical buckling load of the inner tank still exceeds the external pressure exerted by the perlite. The original calculation of perlite pressure applied to the inner tank was based on Zick's code, which led to the overestimation of the external pressure, and consequently, an oversized stiffener. In this study, the effects of the material properties of perlite on the external pressure distribution are scrutinized, and the optimum dimensions of a single stiffener are finally obtained through a series of parametric studies. A 15% decrease in the cost of the stiffener compared with the original design is achieved.

• Journal of architectural history
• /
• v.18 no.6
• /
• pp.103-126
• /
• 2009

This study aims to discover historical trends and change of form of all stupas in India with observation of field study that is as direct as possible, by classifying, analyzing, and synthesizing the stupas. Study of Indian stupa in Korea has a number of shortcomings since only introductory partial approach has been made in order to seek the origin of Korean pagoda. This study also aims to correct errors of stupa terminology in Chinese character committed by misinterpretation of Hindi language which was established by precedent Japanese scholars several decades ago. Piled-up stupas were totally destroyed by pagans, therefore their remains tell us only of structure, material, sizeand disposition. However remains of carved stone at torana and drum give us clues as to the original form of stupa and worshipping activity, as well as change to a more luxurious form. Many rock cave stupas of India show us both simple forms matching the ascetic age of early Buddhism and luxurious changes in Mahayanan era introducing us to statues of Buddha. Indians recovered the spheric form of 'anda,' a Hindi term meaning cosmic egg, from the hemispheric form of the piled-up stupa. Therefore we might discard the erratic term of 'bokbal', which means an upset vessel. Railings and parasols became main factors of stupa design. Carved railings around stupa became a sign of divinity. Serious worshipping activity made drums long or high and created multi-embossed stripes. Bases of circular drums of some cave stupas changed their shapes to rectangular or octagonal. Single parasols became multiparasols of affluent flowerlike curved stems on carved stupa. Multistoried, elongated and high parasols of Gandhara stupas are closely related to such factors as diverse changes of form in Indian subcontinent. Four-sided torana gate and ayaka column of the circular form of original stupas suggest the rectangular form of subsequent East Asian pagoda, and higher and wider base of Indian stupas became the origin of East Asian rectangular pagoda.

• Conservation Science in Museum
• /
• v.1
• /
• pp.75-86
• /
• 1999

Conservation treatments were done for the gilt bronze saddle accessory excavated from Tomb No. 89 in Kyo-dong, Changnyong in Japanese rule period. The saddle accessory, broken into numerous pieces, was mixed with other remains. Principal aims of conservation treatments were to recover original shape of object and stabilize its material. In the process of treatments manufacturing technique of the remain was examined minutely. Thick layers of corrosion substances were peeled off and numerous pieces were pasted together to restore the original shape. And then the saddle accessory was mounted on an acrylic board to be handled and exhibited safely. In this process, it was confirmed that various ancient techniques of metalic crafts such as amalgam gilding, riveting, piercing, line engraving, stamping, chasing etc. had been used to make the saddle accessory.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.1
• /
• pp.63-70
• /
• 2017

In this paper, we design and fabricate a de-orbiter using drag-sail and evaluate deployment characteristics. Without employing an actuator to deploy, the de-orbiter is activated by the SMA wire based the release mechanism and driven by the restoring force of the tape-spring. For efficient storage and deployment of drag-sail, an origami method of original ISO flasher is chosen and low priced mylar film is used as the material of the drag-sail. In addition, through the fault tree analysis method which is one of the one-shot device reliability evaluation methods, we confirm the reliability of the de-orbiter(0.997572) and the Roller failure has the highest criticality. Finally, we find feasibility of the proposed de-orbiter through the deployment demonstration of drag-sail.

• Fashion & Textile Research Journal
• /
• v.19 no.6
• /
• pp.671-680
• /
• 2017

Contemporary people can form a broad social sympathy on cultural products based on the present Korean image. K-pop is good material to use to share korean culture, and fans who are enthusiastic here are increasingly demanding cultural products. The visual materials of Bangtan Boys are collected from their album covers, and a concept book, and divided into specific and symbolic images. Based on this motif, three specific images: 'bulletproof vest', 'army house + superhero extract image', and 'Wings symbol', six designs were proposed. In addition, six motifs from the music videos for recent popular songs, 'Spring Day', 'Blood, Sweat and Tears' and 'Burning Up' were selected as symbolic images. Each selected image is divided into a normal line and a special line. The former is a relatively small, stable, and popular style, and the latter is a large, original, and bold style. By drawing and transforming extracted images and motifs using Adobe Illustrator CS6 and Adobe Photoshop CS6 program, a full-width umbrella design was developed. The messages that the Bangtan Boys wants to convey through their music are put into cultural products that contemporaries can sympathize with. By developing umbrellas, a variety of items and design goods can become desirable points of consumption as high-value products by domestic and foreign fandom. If designs that incorporate various elements of future K-pop contents as well as other Korean Wave contents are developed, it will be possible to develop original design products that will form global understanding.

• International Journal of Concrete Structures and Materials
• /
• v.7 no.1
• /
• pp.35-50
• /
• 2013

Rapid and effective repair methods are desired to enable quick reopening of damaged bridges after an earthquake occurs, especially for those bridges that are critical for emergency response and other essential functions. This paper presents results of tests conducted as a proof-of-concept in the effectiveness of a proposed method using externally bonded carbon fiber reinforced polymer (CFRP) composites to rapidly repair severely damaged RC columns with different damage conditions. The experimental work included five large-scale severely damaged square RC columns with the same geometry and material properties but with different damage conditions due to different loading combinations of bending, shear, and torsion in the previous tests. Over a three-day period, each column was repaired and retested under the same loading combination as the corresponding original column. Quickset repair mortar was used to replace the removed loose concrete. Without any treatment to damaged reinforcing bars, longitudinal and transverse CFRP sheets were externally bonded to the prepared surface to restore the column strength. Measured data were analyzed to investigate the performance of the repaired columns compared to the corresponding original column responses. It was concluded that the technique can be successful for severely damaged columns with damage to the concrete and transverse reinforcement. For severely damaged columns with damaged longitudinal reinforcement, the technique was found to be successful if the damaged longitudinal reinforcement is able to provide tensile resistance, or if the damage is located at a section where longitudinal CFRP strength can be developed.

• Archives of Reconstructive Microsurgery
• /
• v.10 no.2
• /
• pp.169-174
• /
• 2001

Purpose : The problems of late deterioration of sensation and a double sensibility phenomenon are a known deficiency of the original neurovascular island flap. To eliminate this problems, the authors was performed to assess the results of Thumb-pulp loss reconstruction with a heterodigital neurovascular island Flap Using a Nerve Disconnecting-Reconnecting Technique Material and Methods : Between July. 1987 and November. 2000, we have used a disconnecting-reconnecting technique for heterodigital island flaps in which divided nerve of the transferred island flap is sutured to original nerve of the thumb in 9 patients. 9 patients with a mean follow-up period of 3.6 years were examined, while 7 patients were follow-up for 2years or more. Evaluation of results was based on flap quality, donor site quality, classic two-point sensory discrimination(2PD), and location of sensation(double sensibility), donor site cold intolerance, neuroma formation, scar contractures, total active movement(TAM) of the thumb and donor digit and subjective results and objective results. Results : The two-point discrimination was average 6.7 mm. Donor site paresthesia was observed more frequently in a short postoperative period. Sensation was referred to the thumb in all cases and the recovery occurred over a period of a two months. There were no flap complication or failures and the length of the thumb tip was preserved in all cases. Conclusion : This technique was found to provide well-vascularized pulp of the thumb with proper cortical representation in one operative stage.

• International Journal of Highway Engineering
• /
• v.3 no.1 s.7
• /
• pp.185-197
• /
• 2001

This paper dealt with modification of effective crack length model (ECM) by adding Poisson's ratio term to evaluate fracture toughness of asphalt concrete which varies its material property by temperature. The original ECM model was developed for solid materials, such as cement concrete, and Poisson's ratio of materials was not considered. However, since asphalt concrete is sensitive to temperature variation and changes its Poisson's ratio by temperature, it should be taken into consideration to know exact fracture property under various temperatures. Four binders, including 3 polymer-modified asphalt (PMA) binders, were used to make a dense-grade asphalt mixture and 3-point bending test was peformed on notched beam at low temperatures, from -5oC to 35oC. Elastic modulus, flexural strength and fracture toughness were obtained from the test. The results showed that, since Poisson's ratio was considered, the more accurate test values could be obtained using modified ECM equation than original ECM. PMA mixture showed higher stiffness and fracture toughness than normal asphalt mixture under very low temperatures.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.918-921
• /
• 2002

Some investigators who have tried to achieve the highly smooth surface finish using electrochemical processes have reported that high current density produced lustrous surfaces while the opposite conditions produced a passive layer and had a tendency to produce a black surface. However, processing at a low current density may produce a non-lustrous surface but the improvement of dimensional accuracy of the surface is significant. The surface with pulse process was a bit more lustrous than with continuous current but the black passive layer still could be found at grooved surface. There are two ways to achieve highly smooth surface finish. One is brushing it with a brush the other is electrochemical machining (ECM) with high current. The former method is the most common polishing practice, but not only may the surface obtained differ from operator to operator, but precision smooth surface on micro grooves are difficult to obtain. The latter one recently has been used to produce a highly smooth surface after EDM process. However, the material removal rate in ECM with high current is relatively high. Hence the original shape of the micro grooves, which was formed by electrochemical micro-machining (EMM) process, may be destroyed. In this study, an electrochemical polishing process using pulse current is adopted as a possible alternative process when micro grooves formed by EMM process should be polished. Mirror-like micro grooves with lustrous and smooth surface can be produced electrochemically with pulse current because the voltage and current used can be lower than the case of continuous current. This study will discuss the accurate control of physical and electrical conditions so as to achieve mirror-like micro grooves with lustrous and smooth surface without destroying the original shape of micro grooves.

• Geomechanics and Engineering
• /
• v.3 no.1
• /
• pp.61-81
• /
• 2011

In this paper, a complement to the Hoek-Brown criterion is proposed in order to derive the strength of anisotropic rock from strength of the corresponding truly intact rock. The complement is a decay function, which unlike other modifications or suggestions made in the past, is multiplied to the function of the original Hoek-Brown failure criterion for intact rock. This results in a combined and extended form of the criterion which describes the strength of anisotropic rock as a varying fraction of the corresponding truly intact rock strength. Statistical procedures and in particular regression analyses were conducted into data obtained in experiments conducted in the current research program and those collected from the literature in order to define the Hoek-Brown's criterion complement. The complement function was best described by a simple polynomial including only three constants to be empirically evaluated. Further investigations also showed that these constants can be related to the other readily available parameters of rock material which further facilitate determining the constants. A great and prime advantage of the proposed complement is that it is mathematically simple including the least possible number of empirical constants which are easily estimated with minimum experimental effort. Moreover, proposed concept does not suggests any change to the original Hoek-Brown criterion itself or its constants and serves whenever anisotropy does exist in the rock. This further implies on the possibility of using any other failure criterion for intact rock in conjunction with the compliment to reach the strength of anisotropic rock.