• Journal of Ginseng Research
• /
• 제10권2호
• /
• pp.218-232
• /
• 1986

In this review quality improvement, new products and processing of ginseng are discussed. Ginseng products are generally classified into two types; the dried product without significant change in original shape of fresh ginseng and various processed ginseng products in liquid or solid types prepared by addition of either ginseng extract of ground powder. The dried ginsengs are generally made 4 years old fresh ginseng roots for production of white ginseng and 6 years old ones for red ginseng. The processed ginseng products, such as ginseng drinks, extracts, teas, powders, capsules or tablets are prepared by addition of extract or powder of the ginseng roots which contain relatively high amount of saponin. At present, more than 200 items of 40 types of products are commercially available in over 70 countries in the world, Since consummers preference on the quality of ginseng products as an health food differs with their cultural background of each country, new products development and quality improvement should be investigated with concerning the particular preference of the consummers of various country. It has been generally found that the Orientals has higher product acceptance on strong ginseng flavor while the Westerners generally prefers the products having mild ginseng odor and taste. Recently consummers are asking for supplemented type of ginseng products with various medical herbs and vital materials instead of ginseng alone. Therefore future work on product development should be emphasized to meet the consummers demand and preference.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1166-1171
• /
• 2008

Through Korean high speed train development project "G7 Leading Technology Development Project" from 1996 to 2002, HSR-350X has been developed. It can run the maximum operating speed of 350 km/h. Based on this technology, KTX-2 which will be served commercially has been developed till 2007. This paper introduces the aerodynamic analysis of the High-Speed EMU and shows the results of optimized aerodynamic nose shape design techniques and clean pantograph panhead original techniques study. These are the important parts of developments for high speed train which maximum speed is 400 km/h. Especially for decrease of tunnel micro pressure waves, the optimized nose area distributions were derived and the characteristics of micro pressure wave were analyzed. The robust optimized pantograph panhead shapes investigated to improve the performance and decrease the vortex flow which is thought to be its noise source. These shapes are clean and robust to external disturbances like unsteady accelerated flow or side wind was derived. Finally aerodynamic performances was verified with PIV and smog visualization by wind tunnel test.

• International Journal of CAD/CAM
• /
• 제9권1호
• /
• pp.61-69
• /
• 2010

Based on the equivalence principles of physical properties, geometric properties and externally applied forces between a surface and the corresponding curves, we present a fast physics and example based skin deformation method for character animation in this paper. The main idea is to represent the skin surface and its deformations with a group of curves whose computation incurs much less computing overheads than the direct surface-based approach. The geometric and physical properties together with externally applied forces of the curves are determined from those of the surface defined by these curves according to the equivalence principles between the surface and the curves. This ensures the curve-based approach is equivalent to the original problem. A fourth order ordinary differential equation is introduced to describe the deformations of the curves between two example skin shapes which relates geometric and physical properties and externally applied forces to shape changes of the curves. The skin deformation is determined from these deformed curves. Several examples are given in this paper to demonstrate the application of the method.

• 한국재료학회지
• /
• 제19권3호
• /
• pp.156-162
• /
• 2009

Lubricant-based nanofluids were prepared by dispersing carbon nanoparticles in gear oil. In this study, the effects of the particle size, shape and dispersity of the particles on the tribological properties of nanofluids were investigated. Dispersion experiments were conducted with a high-speed bead mill and an ultrasonic homogenizer, and the surfaces of the nanoparticles were simultaneously modified with several dispersants. The effective thermal conductivity of the nanofluids was measured by the transient hot-wire method, and the tribological behaviors of the nanofluids were also investigated with a disk-on-disk tribo-tester. The results of this study clearly showed that the combination of the nanoparticles, the deagglomeration process, the dispersant and the dispersion solvent is very important for the dispersity and tribological properties of nanofluids. Lubricant-based nanofluids showed relatively low thermal conductivity enhancement, but they were highly effective in decreasing the frictional heat that was generated. For nanofluids containing 0.1vol.% graphite particles in an oil lubricant, The friction coefficient in the boundary and fluid lubrication range was reduced to approximately 70% of the original value of pure lubricant.

• 대한조선학회논문집
• /
• 제50권5호
• /
• pp.349-354
• /
• 2013

The blades of flexible propellers are formed by overlaying and adhering many layers of thin glass-fiber fabric sheets, are compressed and dried in the rigid mold. The current manufacturing process can not avoid the rather irregular deformation of the blades composed of non-isotropic non-uniform fabric structures, and inevitably introduces the different shape-forming errors between blades. In this paper, several flexible model propellers are precisely measured with three-dimensional optical instrument and compared with the original design geometry. The model propellers with the as-measured geometry are evaluated with the lifting-surface-theory-based propeller analysis code. The open-water performance are presented and discussed. The importance of the manufacturing accuracy is addressed to be able to apply the flexible propellers for propulsion of marine vehicles.

• Asian Journal of Atmospheric Environment
• /
• 제2권1호
• /
• pp.26-33
• /
• 2008

In order to fully understand the chemical properties of Asian dust particles, especially their transformation and aging processes, it is desirable to investigate the nature of original sands collected at local source areas in China. This study presents the detailed properties of sands collected at four different desert regions (Yinchuan, Wuwei, Dulan, and Yanchi) in China. Most of sands have irregular shape with yellowish coloration, whereas some of them show peculiar colors. The relative size distribution of sands collected at Yinchuan, Wuwei, and Dulan deserts exhibits monomodal with the maximum level between 200 and $300{\mu}$, whereas that of Yanchi desert is formed between 100 and $200{\mu}$. The mass concentration ratio of each element to that of Si (Z/Si) determined by PIXE analysis has a tendency towards higher Z/Si ratios for soil derived elements. It was possible to visually reconstruct the elemental maps on the surface of individual sands by XRF microprobe technique. In addition, the multielemental mass concentration could be quantitatively calculated for numerous spots of desert sands.

• 한국CDE학회논문집
• /
• 제10권6호
• /
• pp.432-443
• /
• 2005

Recent three-dimensional feature-based CAD systems based on solid or non-manifold modelling functionality have been widely used for product design in manufacturing companies. When product models associated with features are used in various downstream applications such as analysis, however, simplified and abstracted models at various levels of detail (LODs) are frequently more desirable and useful than the full detailed model. To provide multi-resolution models, the features need to be rearranged according to a criterion that measures the significance of the feature. However, if the features are rearranged, the resulting shape is possibly different from the original because union and subtraction Boolean operations are not commutative. To solve this problem, in this paper, the new concept of the effective zone of a feature is defined and identified using Boolean algebra. By introducing the effective zone, an arbitrary rearrangement of features becomes possible and arbitrary LOD criteria may be selected to suit various applications. Besides, because the effective zone of a feature is independent of the data structure of the model, the multi-resolution modelling algorithm based on the effective zone can be implemented on any 3D CAD system based on conventional solid representations as well as non-manifold topological (NMT) representations.

• Bulletin of the Korean Chemical Society
• /
• 제31권4호
• /
• pp.819-824
• /
• 2010

We report the laser-induced formation of peanut-shaped gold nanoparticles (Au nanopeanuts) and gold nanowires (AuNWs), and their morphological properties. Pulsed laser irradiation of citrate-capped gold nanoparticles at 532 nm induces fragmentation, spherical growth, the formation of Au nanopeanuts, and the formation of AuNWs, sequentially. High-resolution transmission electron microscopy images reveal that the Au nanopeanuts are formed by instantaneous fusion of spherical nanoparticles in random orientation by laser heating. Furthermore, Au nanopeanuts are bridged in a linear direction to form AuNWs by an amorphous accumulation of gold atoms in the junction. The laser-produced Au nanopeanuts and AuNWs slowly disintegrate, restoring the spherical shape of the original Au nanoparticles when the laser irradiation is stopped. The addition of citrate effectively prevents them from transforming back to the nanospheres.

• 복식
• /
• 제61권7호
• /
• pp.17-34
• /
• 2011

This study examined how Bangryeong(方領) had been changed from ancient times in China to the Joseon dynasty[朝鮮] in Korea by analyzing Bangryeong in literature, relics, paintings, etc. Based on this, we also analyzed the form of Bangryeong itself and clothes with Bangryeong using excavated relics from the Joseon dynasty. First, from early Chinese literature, it was confirmed that meaning of "Bangryeong" was a collar attached straight to a garment so that if the garment is put on with the fronts intercrossed with each other the back neck part of the collar is naturally squared. Second, from literature in the Joseon dynasty, it was confirmed that the meanings and forms of Bangryeong were diversified and had different characteristics throughout different time periods. Different from its original meaning in China, Bangryeong came to mean an intentionally designed square shape. Third, Bangryeong from the Yuan(燕) and Ming(明) Dynasties were found among relics excavated in China. Bangryeong from Yuan was Cheolik[帖裏] worn by men, and Bangryeong from Ming was found in women's dresses. Fourth, Bangryeong relics from the Joseon dynasty examines its form in detail. Bangryeong was found in various forms of clothes, and this was consistent with findings from literature review.

• 대한기계학회논문집B
• /
• 제23권7호
• /
• pp.871-880
• /
• 1999

In this paper an experimental study is presented of the problem of dynamic behavior of a water droplet impinging upon a heated surface. The experiments are mainly focused on the effects of impinging angle of a droplet and surface temperature on the impact dynamics of the droplet. It Is clarified that the droplet exhibits much different behavior depending on the normal momentum of an impinging droplet before impact. At surface temperature In the nucleate boiling regime. the disintegration of a droplet doesn't occur, whereas the deforming droplet adheres to the surface. The spreading and contraction of the liquid film is repeated a couple of times for the horizontal surface but the expanded droplet just slips without noticeable contraction for the inclined surfaces. In the film boiling regime, the impinging droplet spreads over the surface as a liquid film which is separated from the surface by produced vapor. Depending on the magnitude of the normal momentum of the droplet the disintegration into the several irregular shapes of liquid elements occurs for the horizontal and 30o-inclined surfaces, whereas the impinging droplet for the 60o-inclined surface doesn't break up and tends to recover the original spherical shape.