$Pr_{15}Fe_{77}B_{8}$ 조성의 합금을 Ar분위기에서 유도용해로를 이용하여 주조하 였다. 이 합금을 석영관에 넣어 고주파 유도로를 이용하여 용해한 후 0.6 nm의 분출구를 통해 회전하는 Cu wheel위에 분사하여 비본형태로 제조하였다. 이 리본을 열간변형하여 결정방향성을 주었는데 이를 위 해 먼저 $680^{\circ}C$에서 $21.8\;kg/mm^{2}$의 압력으로 hot-press하여 92%의 densification을 갖는 시편을 얻을 수 있었다. 이 시편을 다양한 조건하에서 die-upset을 행하였다. 변형율이 높을 수록 $_{i}H_{c}$는 저하되었으나, $B_{r}$은 현저하게 증가되었으며, XRD 분석 결과(006)면에서의 회절강도가 증가되었다. 따라서 압축방향으로 자화용이축이 형성되었음을 알 수 있었다. Die-upset시의 변형속도가 빠를 수록 $_{i}H_{c}$는 증가되었으나, $B_{r}$은 감소되었다. 가공온도에 따른 $B_{r}$의 변화는 $750^{\circ}C$ 까지 상승한 후 감소되었다. 이 조성의 $4{\pi}M_{s}$는 11.8 kG였고 $750^{\circ}C$에서 0.05 mm/sec의 가공속도로 변형률 0.8로 die-upset한 경우에는 $B_{r}$이 11.0 kG로 우수한 자기이방성을 가지고 있으나, die-upset후에 $_{i}H_{c}$가 낮은 문제점이 있다.
원자력 발전소와 화력 발전소에서는 양질의 전기를 생산하기 위해서는 발전기에 연결된 고압 및 저압 증기터빈에 최적량의 증기를 공급하여야 한다. 터빈에 증기를 공급하거나 차단하는 특수한 밸브인 터빈출력제어장치를 사용하고 있으며, 이 터빈출력제어장치는 유압서보 액추에이터로 구동 된다. 발전소에서는 유압시스템에서 생성되는 기체로 인하여 유압서보 액추에이터의 성능이 저하되거나, 생성된 기체가 압축되면서 발생하는 열로서 씰을 태우고 마모를 증가시켜서 빈번한 고장이 유발된다. 일부 발전소에서는 고정형 오리피스를 사용하여 공기를 배출하고 있지만 많은 유량배출에 따른 동력 손실과 빈번하게 작동되는 펌프, 전기모터 및 밸브 등의 고장을 발생시킨다. 본 연구에서는 기존의 고정형 오리피스와 같이 초기에 많은 량의 공기를 배출하고 정상운전에서는 매우 미세한 유량만 통과 시킬 수 있는 부하 감응형 공기 배출밸브를 모델링하고 해석하여 장착함으로서 유압서보 액추에이터의 제어 정밀성 확보와 기체 압축으로 인한 고장을 방지할 수 있게 하였다.
Objectives The aim of this study is to compare the quality of root canal preparation completed using MFile-$System^{(R)}$ instrument ( Komet, Gebr.Brsaseler, Germany) and conventional stainless steel file in the canals of Maxillary molar teeth that had a canal curvature between $25^{\circ}$ or more Materials & Methods Buccal canals of 24 first and second maxillary molar teeth, extracted for periodontal and prosthetic reasons were used. Tissue fragments and calcified debris were removed from teeth by scaling and the teeth were stored in 10% formalin solution for 24 hour. Then, teeth were stored in saline until used. To be included the roots had to have completed formed apices and angle of curvature ranging between $25^{\circ}$ or more according to the criteria described by Schneider(1971). Palatal and Second mesiobuccal canals were not included. Teeth were embedded into transparent acrylic. The teeth were randomly divided into two experimental groups. All teeth were scanned by Dental CT (PSR9000N, Asahi, Japan) to determine the root canal shape before instrumentation. Image slices were prepared from the apical end point to the pulp chamber. The first two sections were 2 mm from the apical end of root and 2 mm below the orifice. Further section was recorded, dividing the distance between the sections of apical and coronal levels into two equal lengths. 12 teeth were instrumented using stainless steel fileand another 12 teeth were instrumented using MFile-$System^{(R)}$. Following the completion of the instrumentation, the teeth were again scanned and compared with the cross sectional images taken prior to canal preparation. Amount of transportation and centering ability was assessed. Student's t-test was used for statistical analysis. Result Less transportation occurred with MFile-$System^{(R)}$ rotary instrumentation than stainless steel instrument. MFile-$System^{(R)}$ had better centering ability than stainless steel instrument. Conclusion MFile-$System^{(R)}$ rotary instrumentation transported canals less and had good centering ability.
Journal of the Korean Association of Oral and Maxillofacial Surgeons
/
제44권5호
/
pp.212-219
/
2018
Objectives: The objective of this study was to analyze 11 cases of subcutaneous emphysema associated with dental procedures from a single hospital and discuss approaches for accurate diagnosis and treatment of the condition. Materials and Methods: The medical records of 11 patients who were treated for subcutaneous emphysema related to dental procedures between January 2009 and April 2017 were analyzed retrospectively. Patients with subcutaneous emphysema within the facial area or that spread to the neck and beyond, including the facial region, were assigned to two groups and compared in terms of age, sex, and durations of antibiotic use, hospitalization, and follow-up until improvement. The correlation between location of the origin tooth and range of emphysema spread was analyzed. Results: The average durations of antibiotic use during conservative treatment and follow-up until improvement were 8.55 days (standard deviation [SD], 4.46 days) and 1.82 weeks (SD, 1.19 weeks), respectively. There was no intergroup difference in duration of antibiotic use (P=0.329) or followup (P=0.931). Subcutaneous emphysema was more common after dental procedures involving the maxilla or posterior region than after those involving the mandible or anterior region. There was no significant difference in air distribution according to location of the air orifice (maxilla, mandible, or both; P=0.106). Conclusion: Upon adequate conservative treatment accompanied by prophylactic antibiotic treatment considering the risk of infection, patients showed signs of improvement within a few days or weeks. There was no significant difference in treatment period between patients with subcutaneous emphysema localized to the facial region and those with subcutaneous emphysema spreading to the neck or beyond. These findings need to be confirmed by analysis of additional cases.
최근 평균수명의 연장과 진단 및 치료 방법의 발달로 원발성 중복암의 발견율이 높아지고 있다. 폐와 간에 발생한 중복암, 특히 동시성 중복암에 대한 보고는 매우 드물다. 저자 등은 만성기침을 호소하는 73세 남자에서 폐의 편평상피세포암을 진단한 후, 복부초음파에서 간 종괴를 발견하여 폐암의 전이를 의심하였으나 FDG-PET에 간 전이가 없어서 초음파 유도로 간 생검을 시행한 결과 간세포암을 진단하여, 폐와 간의 동시성 중복암을 경험하였기에 문헌고찰과 더불어 보고한다.
This review will be concentrated on the spray characteristics of bioethanol and its derived fuels such as ethanol-diesel, ethanol-biodiesel in compression ignition (CI) engines. The difficulty in meeting the severe limitations on NOx and PM emissions in CI engines has brought about many methods for the application of ethanol because ethanol diffusion flames in engine produce virtually no soot. The most popular method for the application of ethanol as a fuel in CI engines is the blending of ethanol with diesel. The physical properties of ethanol and its derivatives related to spray characteristics such as viscosity, density and surface tension are discussed. Viscosity and density of e-diesel and e-biodiesel generally are decreased with increase in ethanol content and temperature. More than 22% and 30% of ethanol addition would not satisfied the requirement of viscosity and density in EN 590, respectively. Investigation of neat ethanol sprays in CI engines was conducted by very few researchers. The effect of ambient temperature on liquid phase penetration is a controversial topic due to the opposite result between two studies. More researches are required for the spray characteristics of neat ethanol in CI engines. The ethanol blended fuels in CI engines can be classified into ethanol-diesel blend (e-diesel) and ethanol-biodiesel (e-biodiesel) blend. Even though dodecanol and n-butanol are rarely used, the addition of biodiesel as blend stabilizer is the prevailing method because it has the advantage of increasing the biofuel concentration in diesel fuel. Spray penetration and SMD of e-diesel and e-biodiesel decrease with increase in ethanol concentration, and in ambient pressure. However, spray angle is increased with increase in the ethanol percentage in e-diesel. As the ambient pressure increases, liquid phase penetration was decreased, but spray angle was increased in e-diesel. The increase in ambient temperature showed the slight effect on liquid phase penetration, but spray angle was decreased. A numerical study of micro-explosion concluded that the optimum composition of e-diesel binary mixture for micro-explosion was approximately E50D50, while that of e-biodiesel binary mixture was E30B70 due to the lower volatility of biodiesel. Adding less volatile biodiesel into the ternary mixture of ethanol-biodiesel-diesel can remarkably enhance micro-explosion. Addition of ethanol up to 20% in e-biodiesel showed no effect on spray penetration. However, increase of nozzle orifice diameter results in increase of spray penetration. The more study on liquid phase penetration and SMD in e-diesel and e-biodiesel is required.
폐전이에서 공동성 폐병변이 관찰되는 경우가 흔하지 않으며, 다른 양성 폐병변과 감별이 필요하다. 저자들은 다발성 공동성 폐병변을 주소로 내원한 환자에서 굴곡성 기관지내시경 검사를 통한 조직검사상 전이성 폐암을 진단하였고 원발성 병변인 담관암을 진단하여 전신적인 항암약물을 시행한 경험이 있어 이에 보고하는 바이다.
이 연구는 능성어 (Epinephelus septemfasciatus)의 소화관 발달과정을 형태학적과 조직학적인 방법으로 부화 후부터 60일 동안 관찰하였다. 먹이 급이는 부화 후 2일부터 20일 동안 Rotifer (Brachionus rotundiformis)와 클로렐라 (Chlorella ellipsoidea)를 급이 하였고, 20일부터 Rotifer와 brine shrimp (Artemia salina)를 급이 하였으며, 23일부터 Rotifer와 Artemia, 배합사료를 급이 하였다. 자치어 10마리를 임의로 선택하여 10% 중성포르말린에 고정한 후 형태학적 관찰과 파라핀포매법에 의한 조직학적인 관찰을 하였다. 능성어의 RLG는 평균 0.87으로 육식성어류의 특성을 보여주었다. 부화 직후의 자어는 입과 항문은 열려있지 않았고, 소화관은 난황을 따라 일직선상으로 관찰되었다. 부화 후 5일째 후기 자어는 입과 항문이 열리면서 첫 섭식 활동이 관찰되었고, 부화 후 8일째 변태가 시작되었다. 부화 후 11일째 후기 자어 식도는 네 개의 층이 구분 되었으며, 식도와 중장, 직장에서는 배상세포가 관찰되었다. 부화 후 19일째 후기 자어는 공식이 시작되었으며, 그로인해 개체의 성장차이가 관찰되었다. 위는 내부가 팽창되면서 분문위, 위체부 및 유문위의 구분이 가능해졌고, 유문수가 분화되었으며, 장 전체에서는 배상세포를 관찰할 수 있었다. 부화 후 28일째 위내부에 위선이 분화되었다. 부화 후 38일째 후기 자어는 위에서 위액이 분비되는 것을 확인할 수 있었고, 유문수에 점막주름이 확인되었다. 부화 후 38일째에서 치어기로 이행하는 시기 동안 위 내강은 넓어지고, 위선의 숫자와 장내점액세포, 점막주름은 지속적으로 증가하거나 길어졌으나 조직화학적인 변화는 관찰되지 않았다. 따라서 본 연구는 형태학적 및 조직학적 방법을 이용하여 능성어의 소화관 분화 및 발달에 관한 정보를 얻고자 하였으며, 초기 종묘생산과정에서 적절한 먹이투여시기를 확립함으로써 성장 및 생존율 향상에 기초자료를 제공하고자 하였다.
From 1989 to 1994, authors have reconstructed the posterior cruciate ligament(PCL) in 51 knees with an autogenous central one-third of the patellar tendon by transtibial two tunnel technique, but there were not a few cases of unfavorable results. So from January 1995, we have reconstructed the PCL deficient knees by "modified tibial inlay technique" to avoid the grafted tendon abrasion at the posterior opening of the tibial tunnel(killer turn). Purpose of this study was to compare the results of two surgical techniques and what its advantages and disadvantages are. We could follow up 39 cases of transtibial two tunnel techique group(group A) more than one year, average being 23.7 months and 21 cases of modified tibial inlay technique group(group B) more than 12 months, average being 14.7 months. The clinical results were evaluated by the OAK knee scoring system ($M{\ddot{u}}ller$'s criteria) and the posteror stress roentgenography (push view) with Telos stress device compared with the uninjured knees. The arthroscopic second-look findings were also evaluated. In group A : The $M{\ddot{u}}ller$'s knee score was average 80.1 points, the posteror displacement in push view was average 4.4mm at the last follow up. There were 17 cases(44%) of unfavorable results which showed unstable posterior displacement more than 4mm compared with the uninjured knee in push view. Among the 19 cases of arthroscopic second look examinations, nearly normal PCL appearances of the grafted tendons were noted only in 9 cases(47%). In group B : The $M{\ddot{u}}ller$'s knee score was average 86.7 points, the posterior displacemnet in push view was average 3.6mm at the last follow up. There were 5 cases(23.8%) of unfavorable results which showed unstable posterior displacement more than 4mm compared with the uninjured knee in push view but 4 out of 5 cases showed 6mm posterior displacement in push views. Among the 7 cases of arthroscopic second-look examinations, 6 cases(86%) showed nearly normal PCL appearances of the grafted tendons. In modified tibial inlay technique of PCL reconstruction, it was easier to pull out the BPTB and in cases of remained laxed meniscofemoral ligament it was easier to preserve the remained structures than transtibial two tunnel technique. We expect the "modified tibial inlay technique" may solve the problem of grafted patellar tendon abrasion at the posterior orifice of tibial tunnel and may contribute to the successful PCL reconstruction.
다획성 어종인 고등어, 정어리, 말쥐치 등을 연제품 기타 식품소재로 이용하기 위해서는 다양처리를 위한 기계처리가 필요하나 적색육조에 많은 혈합육의 분리가 어려워 품질에 문제점이 있다. 기계처리적정에서 보통육과 혈합육을 분리하는 방법으로 당용액의 비중차에 의한 분리유과를 검토한 결과를 요약하면 다음과 같다. (1) 보통육과 혈합육을 분리할 수 있는 유효비중한계는 고등어의 경우 $1.067\sim1.072$, 정어리의 경우$1.02\sim1.070$ 말쥐치의 경우 $1.073\sim1.077$였다. (2) 육립자의 크기에 따른 분리율은 chopper 세공판의 공경이 0.2cm일 때에 $90\%$였고 0.3cm일 때에 $60\%$였다. (3) 육립자의 밀도에 따른 분리효과는 당용액에서의 침강력 높이가 1.8cm정도, 즉 육입자 밀도 $1g/cm^2$일 때 분리율이 $92\%$였고, 즉 $5g/cm^2$일 매에는 $59\%$로 낮았다. (4) 자당용액에서는 부상분리층이 25분 경과하여도 침강하지 않았으나 포도당액에서는 5분후부터 서서히 침강하였다. (5)당용액의 비중이 높아짐에 따라서 유지의 분리율 높았으며 유효비중한계내에서도 $90\%$정도의 지방을 분리할 수 있었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.