• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.2
• /
• pp.110-118
• /
• 2002

Organic thin film transitors(OTFT) are of interest for use in broad area electronic applications. And recently organic electroluminescent devices(OELD) have been intensively investigated for using in full-color flat-panel display. We have fabricated inverted-staggered structure OTFTs at lower temperature using the fused-ring polycyclic aromatic hydrocarbon pentacene as the active eletronic material and photoacryl as the organic gate insulator. The field effect mobility is 0.039∼0.17 ㎠/Vs, on-off current ratio is 10$\^$6/, and threshold voltage is -7V. And here we report the study of driving emitting, Ir(ppy)$_3$, phosphorescent OELD with all organic thin film transistor and investigated its electrical characteristics. The OELD with a structure of ITO/TPD/8% Ir(ooy)$_3$ doped in BCP/BCP/Alq$_3$/Li:Al/Al and OTFT with a structure of inverted-stagged Al(gate electrode)/photoacry(gate insulator)/pentacene(p-type organic semiconductor)/ Au(source-drain electrode) were fabricated on the ITP patterned glass substrate. The electrical characteristics are turn-on voltage of -10V, and maximum luminance of about 90 cd/㎡. Device characteristics were quite different with that of only OELD.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.155-158
• /
• 2007

Printed organic thin-film transistor(OTFT) to use as a switching device for an organic light emitting diode(OLED) were fabricated in the microcontact printing and direct printing processes at room temperature. The gate electrodes($5{\mu}m$, $10{\mu}m$, and $20{\mu}m$) of OTFT was fabricated using microcontact printing process, and source/drain electrodes ($W/L=500{\mu}m/5{\mu}m$, $500{\mu}m/10{\mu}m$, and $500{\mu}m/20{\mu}m$) was fabricated using direct printing process with hard poly(dimethylsiloxane)(h-PDMS) stamp. Printed OTFT with dielectric layer was formed using special coating system and organic semiconductor layer was ink-jet printing process. Microcontact printing and direct printing processes using h-PDMS stamp made it possible to fabricate printed OTFT with channel lengths down to $5{\mu}m$, and reduced the process by 20 steps compared with photolithography. As results of measuring he transfer characteristics and output characteristics of OTFT fabricated with the printing process, the field effect characteristic was verified.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.6
• /
• pp.588-593
• /
• 2023

The advantage of OTFT technology is that large-area circuits can be manufactured on flexible substrates using a low-cost solution process such as inkjet printing. Compared to silicon-based inorganic semiconductor processes, the process temperature is lower and the process time is shorter, so it can be widely applied to fields that do not require high electron mobility. Materials that have utility as electrode materials include carbon that can be solution-processed, transparent carbon thin films, and metallic nanoparticles, etc. are being studied. Recently, a technology has been developed to facilitate charge injection by coating the surface of the Al electrode with solution-processable titanium oxide (TiOx), which can greatly improve the performance of OTFT. In order to commercialize OTFT technology, an appropriate method is to use a complementary circuit with excellent reliability and stability. For this, insulators and channel semiconductors using organic materials must have stability in the air. In this study, carbon-doped Mo (MoC) thin films were fabricated with different graphite target power densities via unbalanced magnetron sputtering (UBM). The influence of graphite target power density on the structural, surface area, physical, and electrical properties of MoC films was investigated. MoC thin films deposited by the unbalanced magnetron sputtering method exhibited a smooth and uniform surface. However, as the graphite target power density increased, the rms surface roughness of the MoC film increased, and the hardness and elastic modulus of the MoC thin film increased. Additionally, as the graphite target power density increased, the resistivity value of the MoC film increased. In the performance of an organic thin film transistor using a MoC gate electrode, the carrier mobility, threshold voltage, and drain current on/off ratio (I_on/I_off) showed 0.15 cm²/V·s, -5.6 V, and 7.5×10⁴, respectively.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.6
• /
• pp.797-803
• /
• 2013

In this paper, we fabricated insulator thin films by plasma polymerization method for organic thin film transistor's insulator layer. For improving the electrical characteristics of organic transistor, we treated the semiconductor thin film with $O_2$ plasma. As results, the surface energy of organic transistor was increased from $38mJ/m^2$ to $72mJ/m^2$ and the mobility of organic transistor was increased $0.057cm^2V^{-1}s^{-1}$, that is increased 29% average ratio. Therefore, we have known that oragnic transistor's mobility can improve with plasma treatment of semiconductor thin film's surface.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.210.2-210.2
• /
• 2015

유기 박막 트랜지스터(Organic Thin Film Transistor, OTFT)기반의 바이오센서는 저비용 제작 및 플렉서블 소자 제작이 가능하여 많은 주목을 받아오고 있다. 본 연구에서는, hexamethyldisilazane (HMDS) 표면 처리된 $Si/SiO_2$ 기판 위에 진공 증착 공정을 이용하여 pentacene 기반의 OTFT를 제작한 후, 수용성 매체에 대한 안정성을 향상시키기 위하여 저분자 물질인 tetratetracontane (TTC)를 진공 증착 공정을 이용하여 증착하였으며, cyclized perfluoropolymer (CYTOP)을 용액 공정으로 코팅하여 bilayer의 passivation 층을 형성하였다. 실제 제작된 OTFT의 수용성 매체에 대한 안정성을 테스트하기 위하여 소자에 수용성 phosphate buffered saline (PBS)용액을 투하하여 10분에 걸쳐 1분 간격으로 transistor의 transfer 특성을 측정하였다. 또한 측정된 $I_d-V_g$ 곡선 데이터를 이용하여 시간에 따른 드레인 전류, 이동도, 문턱 전압, 점멸비 등의 수치를 산출하였다. 그리고, 그 $I_d-V_g$ 곡선 데이터와 산출된 데이터들을 증류수가 투하된 OTFT 소자의 $I_d-V_g$ 곡선 데이터와 산출된 데이터들과 비교하였다. 결론적으로, TTC/Cytop bilayer passivation 층이 형성된 OTFT 소자는 인체 내 혈액의 pH와 유사한 PBS 용액 하에서도 안정적인 구동 성능을 보여 바이오센서로 응용될 수 있는 가능성이 있다는 결론을 얻었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1315-1318
• /
• 2007

Hafnium dioxide nano film as gate insulator for organic thin film transistors is prepared by atomic layer deposition. Mostly crystalline of $HfO_2$ films can be obtained with oxygen plasma and with water at relatively low temperature of $150^{\circ}C$. $HfO_2$ was deposited as a uniform rate $1.2A^{\circ}/cycle$. The morphology and performances of OTFT will be discussed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.36-36
• /
• 2010

유기 반도체는 합성 방법의 다양함, 섬유나 필름 형태로 성형이 용이함, 경량성, 유연성, 전도성, 저렴한 생산비, 높은 생산성 등의 특성을 가지고 있으며, 무기물과 같이 벌크 성질을 이용할 수 있을 뿐만 아니라, 분자 자체가 기능성을 가지므로 초박막의 형태에서도 기능성이 유지되어 새로운 초박막 기능성 전자소자 및 광소자의 개발이 가능하다. 특히 플라스틱과 같이 유연한 기판에 박막을 성형할 수 있기 때문에 기존의 고체 반도체로써 실현할 수 없는 두루마리 TV와 같은 flexible application에 적용할 수 있다. 본 발표에서는 유기반도체를 사용하는 유기소자 중 유기박막트랜지스터(Organic Thin Film Transistor; OTFT)에 대한 전반적인 기술동향과 동작원리 및 소자구조와 성능과의 관련성, 그리고 성능 개선을 위하여 시도되고 있는 여러 가지 공정 및 표면처리의 효과에 대하여 설명한다. 또한 본 연구실에서 수행하고 있는 OTFT 관련 연구현황을 소개하고 OTFT의 발전방향을 예측해 본다.

• ETRI Journal
• /
• v.34 no.6
• /
• pp.970-973
• /
• 2012

In this letter, we report on the development progress of a pressure control organic vapor deposition (PCOVD) technology used to design and build a large area deposition system. We also investigate the growth characteristics of a pentacene thin film by PCOVD. Using the PCOVD method, the mobility and on/off current ratio of an organic thin-film transistor (OTFT) on a plastic substrate are $0.1cm^2/Vs$ and $10^6$, respectively. The developed OTFT can be applied to a flexible display on a plastic substrate.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.450-450
• /
• 2007

Indium tin oxide (ITO), which is used as an electrode in organic thin film transistors (OTFT), was modified with a self-assembled monolayer (SAM) by wet chemical surface modification. The surface of the ITO was treated by dipping method in a solution of 2-chloroethane phosphonic acid (2-CEPA) at room temperature. The work function in the ITO which was modified with the SAM in the 2-CEPA had 5.43eV. A surface energy and a transmittance were unchanged in an error range. On this study, therefore, possibility of ohmic contact is showed in the interface between the ITO and the organic semiconductors. These results suggest that the treatment of the ITO with the SAM can greatly enhance the performance of the OTFT.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.6
• /
• pp.512-518
• /
• 2006

In this paper, we investigated the deposition of pentacene thin film on a large area substrate by Organic Vapor Phase Deposition(OVPD) and applied it to fabrication of Organic Thin Film Transistor(OTFT). We extracted the optimum deposition conditions such as evaporation temperature of $260^{\circ}C$, carrier gas flow rate of 10 sccm and chamber vacuum pressure of 0.1 torr. We fabricated 72 OTFTs on the 4 inch size Si Wafer, Which produced the average mobility of $0.1{\pm}0.021cm^2/V{\cdot}s$, average subthreshold slope of 1.04 dec/V, average threshold voltage of -6.55 V, and off-state current is $0.973pA/{\mu}m$. The overall performance of pentacene TFTs over 4 ' wafer exhibited the uniformity with the variation less than 20 %. This proves that OVPD is a suitable methode for the deposition of organic thin film over a large area substrate.