• Journal of Korean Society on Water Environment
• /
• v.22 no.1
• /
• pp.30-36
• /
• 2006

This study was carried out to evaluate the performance of Modified Ludzsck Etinger (MLE) process with waste oyster shell media in aerobic tank. Influent flow was 36 L/d and the order of reactor was anoxic, aerobic and sedimentation tank and unit hydraulic retention time was 2 hr, 6 hr and 4 hr, respectively. Sludge recycling rate in sedimentation tank and internal recycling rate were 100%. Media fill rate in aerobic tank was 5%, 10% and 17% and fluid MLSS concentration in aerobic tank was 3000~4000 mg/L. Average TCOD removal rate was 91~93%, TBOD 92~96%, SS 95~96% and when media fill rate was 10% or more, in organic compound removal it could satisfy with wastewater discharge standard. Average total nitrogen removal rate was 70~76% and average total phosphorous removal rate was 58~65%. With media fill rate increasing, total phosphorous average removal rate also increased. For it was that released calcium ion from waste oyster shell reacted with soluble phosphorous. From these experiment results, the MLE process using waste oyster shell as media is a practical method for advanced sewage treatment in rural area.

• The Korean Journal of Pesticide Science
• /
• v.19 no.4
• /
• pp.402-410
• /
• 2015

The purpose of this study was to estimate the chitinolytic and antifungal activity of Actinomycetes sp.isolated from waste mushroom media. In five kinds of waste mushroom media, Sinyeong mushroom and Yangsongi were the order of the population density of actinomycetes. Totally 91 chitinolytic isolates of Actinomycetes sp. were obtained from waste mushroom media. The isolates were categorized into 3 groups based on chitinolytic activity and antagonisms against Phytophthora capsici, Rhizoctonia solani, Sclerotinia sclerotiorum, Collectotrichum gloeosporioides, and Cladosporium cucumerinum in vitro. CA-23 was selected as a representative isolate of a group showing strong chitinolytic and antagonistic activities to all of the plant pathogens, while AA-65 was selected as a representative isolate showing no chitinolytic activities but strong antagonistic activities to the pathogens. CA-23 and AA-65 were highly effective on control of Phytophthora blight of hot-pepper, powdery mildew and scab of cucumber in a greenhouse tests. Among the isolates tested, CA-23 showed highest control efficacy, while AA-65 not only effectively controlled the diseases but also consistently increased plant growth and yield. Although the isolates are similarly affected on suppression of plant pathogens, the isolates could be differ from each other in modes of action. Further studies on mechanisms and practical applications are being progressed.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1998.10a
• /
• pp.508-512
• /
• 1998

Recently, biofilm reactors are considered as efficient wastewater treatment system in rural areas, because of characteristics of easy operation and economic feasibility. In order to select the most efficient media, an experimental apparatus with five different media was designed, installed and examined. The media used in this study were zeolite, artificial sponge gourd, absorbent biofilter, non-woven fabric and charcoal. With only one month investigation, all five media showed high removal efficiencies of BOD.

• Journal of the Korean Ceramic Society
• /
• v.36 no.2
• /
• pp.210-219
• /
• 1999

The fundamental dispersion property of Si2N4 and a combination of AlN and Nd2O3 as sintering additives in a variety of organic solvents such as alcohols, hydrocarbons, ketones, and ethers was investigated. The stabilization mechanism and interaction between organic functional groups of the various organic additives were studied to clarify the dispersibility of the ceramic particles in the nonaqueous suspending medium. characterization of the suspensions was based mainly on electrokinetic sonic amplitude(ESA) measurements and the flow curves obtained from the rheological studies as well as estimated Hamaker constants. It was found that the contribution of electrostatic repulsive forces to the Si3N4, AlN and Nd2O3 stabilization in organic media is appreciably greater than anticipated and is dependent on the physicochemical properties of organic solvents.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.6 no.2
• /
• pp.150-155
• /
• 2001

It has been observed that water, which is absolutely essential for enzyme activity, can induce the agglomeration of enzyme particles in organic media. Although enzyme agglomeration is significant in that it usually reduces enzyme activity and stability, little attention has been paid to the quantitative analysis of enzyme agglomeration behavior in nonaqueous biocatalytic systems. In this study, the effect of water and silica gel on enzyme agglomeration were investigated using Candida rugosa lipase and cyclohexane as a model enzyme and an organic medium. The extent of enzyme agglomeration was quantified by sieve analysis of freeze-dried agglomerates. Increasing the water content of the medium increased the size of the enzyme agglomerates, and it was found that water produced during the esterification reaction could also promote the agglomeration of enzyme particles suspended in organic media. On the other hand, the size of the enzyme agglomerates was remarkably reduced in the presence of silica gel at the same water content. We also show that this increase in the size of enzyme agglomerates results in lower reaction rates in organic solvents.

• Environmental Engineering Research
• /
• v.23 no.4
• /
• pp.345-353
• /
• 2018

This paper summarizes results of research on the electrochemical (EC) degradation of disinfection by-products (DBPs) and iodine-containing contrast media (ICMs), with the focus on EC reductive dehalogenation. The efficiency of EC dehalogenation of DBPs increases with the number of halogen atoms in an individual DBP species. EC reductive cleavage of bromine from parent DBPs is faster than that of chlorine. EC data and quantum chemical modeling indicate that the EC reduction of iodine-containing DBPs (I-DBPs) is characterized by the formation of active iodine that reacts with the organic substrate. The occurrence of ICMs has attracted attention due to their association with the generation of I-DBPs. Indirect EC oxidation of ICMs using anodes that produce reactive oxygen species can result in a complete degradation of these compounds yet I-DBPs are formed in the process. Reductive EC deiodination of ICMs is rapid and its overall rate is diffusion-controlled yet I-DBPs are also produced in this reaction. Further progress in practically feasible EC methods to remove DBPs, ICMs and other trace-level organic contaminants requires the development of novel electrocatalytic materials, elimination of mass transfer limitations via innovative design of 3D electrodes and EC reactors, and further progress in the understanding of intrinsic mechanisms of EC reactions of DBPs and TrOC at EC interfaces.

• Ocean and Polar Research
• /
• v.25 no.3
• /
• pp.277-286
• /
• 2003

Nitrification performance of fixed film biofilters using coarse sand, loess bead, or styrofoam beads in biofilter columns 1 meter high and 30cm in diameter were studied at different hydraulic and organic matter loading rates. Synthetic wastewater was supplied to the culture tank in order to maintain desired TAN concentrations in inlet water to biofilters. All the biofilters were conditioned 5 months before start of sampling. TAN and $NO_2-N$ conversion rates increased with an increase in the hydraulic loading rate (HLR). However, the improvement in biofilter performance was not linearly correlated to HLR in styrofoam bead filters. This is mainly due to the characteristics of the styrofoam beads used. TAN conversion rates of sand filters increased with the increase of HLR up to $200m^3/m^2$. per day. No increase in the TAN conversion rate was observed at the highest HLR since flooding on the media surface took place. HLR had a significant impact on the TAN conversion rates in loess bead filter up to the highest HLR tested (P<0.05). TAN conversion rates were much less at organic matter loading rates of 9 and 18kg $O_2/m^3$ per day than those without the addition of organic matter in styrofoam bead filters. The addition of glucose resulted in a reduction of the TAN conversion rate from 540 to 284g $TAN/m^3$ per day. No significant difference of TAN conversion rates between the two organic matter loading rates was found (p<0.05). This indicates that the impact of organic matter on nitrification becomes less and less sensitive with an increase in the COD/TAN ratio. At an organic matter loading rate of 9kg $O_2/m^3$. per day, a great reduction of TAN conversion rates was observed in sand filters and loess bead filters. Clearly, organic matter can be one of the most Important Impacting factors on nitrification. $NO_2-N$ conversion rates showed a similar trend for TAN. Based on the TAN and nitrite conversion rates, styrofoam beads showed the best performance among the three filter media tested. Also, the low gravity and price of styrofoam beads make the handling easier and more cost-effective for commercial application. The results obtained at the highest organic matter loading rates can be used in the biofilter design in recirculating aquaculture system.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1999.10c
• /
• pp.682-688
• /
• 1999

We threat sludge by heating methods with low pollution and high efficiency. Organic and inorganic components in Sludge can be almost removed through the heaging treatment process, and thefinal products are called artifical aoil or artificial media which are depended on temperature control. It can be recycled on the agricultural sites. Because it contained sort of organic matters while high heaging process with addition. To use them as agricultural materials, it need to know their characteristic transform in the nature. So we have planting bean and corn for two years with standard planting methods and to anticipate changing characteristics of artificial media and artificial soil by staying it natural condition, analyze it physical and chemical characteristics. This study will be contributed to reduce mass enviornmental problems by the treatment of Sludge and make it possible application for a agriculture use.

• The Korean Journal of Mycology
• /
• v.44 no.3
• /
• pp.166-170
• /
• 2016

Ectomycorrhizal fungi are associated with plants roots and acquire significant amounts of nitrogen sources from the soil. For artificial cultivation, mass production of ectomycorrhizal fungi in liquid media is required. We studied the edible ectomycorrhizal mushrooms Hygrophorus russula, Ramaria fumigata, Sarcodon aspratus, and Tricholoma matsutake. All strains except S. aspratus NIFoS 2031 grew generally well on modified Melin-Norkran's (MMN) medium compared to on other media. All strains analyzed in this study showed significantly higher growth on organic nitrogen. Specifically, two strains of H. russula significantly responded to both tryptone and neopeptone media. Among different species and strains, there were clear differences in the capacity to grow on animal-based organic nitrogen sources.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.17 no.2
• /
• pp.73-80
• /
• 2009

Biofilters use porous solid media to support microorganisms and allow access to the contaminants in the airflow. The characteristics of media used in biofilters vary greatly, and therefore it is important to select the appropriate media in order to obtain a large enough surface attachment area and uniform pore. This study was performed to compare hydrogen sulfide ($H_2S$) removal efficiencies of three biofilter media; coconut fiber, ceramic, and polyurethane. The biofilter packed with coconut fiber showed stable removal activity when inlet loading was changeable, and was restored rapidly when the moisture content decreased. However, the coconut fiber suffered from low durability. To cope with this problem a media of fibrinous polypropylene was developed to strengthen the durability of the coconut fiber. Biofilter column experiments using the fibrinous polypropylene media demonstrated over 99% of removal efficiencies at pH as low as 3 and 6 seconds of EBRT (empty bed gas residence time). Due to its superior physical characteristics, it is expected that the $H_2S$ treatment performance will increase when the new fibrinous polypropylne media is applied in commercial biofilter systems.