• Journal of the Korea Organic Resources Recycling Association
• /
• v.32 no.1
• /
• pp.31-38
• /
• 2024

In this study, vinyl waste, which is the cause of environmental pollution, is recycled via an electrospinning method and applied as a separator that can be employed for energy storage devices. In detail, vinyl wastes are dissolved in a solution containing p-xylene and cyclohexanone, followed by electrospinning to obtain a vinyl waste-derived separator(VWS), and then the hydrophilic functional groups on the surface of VWS are introduced using a plasma treatment to improve wettability. Scanning electron microscopy analysis have verified that the shape and thickness of as-spun VWS vary depending on the concentration of vinyl waste. The surface hydrophility of VWS is modified by plasma treatment with applied powers ranging from 80 to 120W. The lowest contact angle is observed when the 100W power is applied to VWS(VWS-100W). In electrochemical analysis, the VWS-100W-based supercapacitor device shows the highest specific capacitance of 57.9 F g^-1. This is ascribed to the high porosity achieved by electrospinning as well as the introduction of hydrophilic functional groups by the oxygen plasma treatment. In conclusion, vinyl waste is successfully recycled into separators for energy storage devices, suggesting a new way to reduce environmental pollution.

• Journal of Soil and Groundwater Environment
• /
• v.14 no.5
• /
• pp.18-28
• /
• 2009

Both feasibility and accuracy of lumped approach to group 12 organic compounds in mixtures into a fewer number of pseudocompounds in sorption processes were evaluated using mixtures containing organic compounds with various physicochemical properties and low-surface-area mineral sorbents. The lumped approach for sorption to simulated mineral sorbents was developed by cluster analysis from statistics. Using the lumped approach, the sorption estimated from both reduced number of pseudocompounds and their sorption parameters (i.e., $K_f$, n) can approximate sorption behavior of complex organic mixtures. Additionally, the pseudocompounds for various mixtures to different types of low-surface-area mineral sorbents can be estimated a priori from the physicochemical properties of organic compound (i.e., ${\gamma_w}^{sat}$). Therefore, the lumped approach may help to simplify the complex fate and transport model of organic contaminant mixtures, reduce experimental efforts, and yet provide results that are statistically identical for practical purposes. Further research is warranted to enhance the accuracy of lumped approach using the multiple regression analysis considering the H-bonding capacity, site concentrations, functional groups for mineral sorbents.

• Journal of the Korean Society of Food Culture
• /
• v.28 no.6
• /
• pp.623-630
• /
• 2013

The purpose of this study was to determine the differences in perception of food hygiene and interest in dietary information among university students. A total of 550 college students from Seoul and the surrounding metropolitan area participated in this questionnaire using one-to-one interviews from September 20th to 28th, 2012. Three groups were classified according to level of awareness and practice of food safety. The highest education level of food safety was in the active-practice group (69.6%), with 58.0% in the want-practice group and 24.6% in the low-practice group. There were significant differences between the awareness and practice groups in terms of importance of food safety (p<0.001). Exactly 74.3% interest in food hygiene was measured in the active-practice group. Interests in dietary and food information were different between the groups: 71.4% for the active-practice group versus 24.6% for the low-practice group (p<0.001). Low-practice group showed the lowest scores for interests in organic food, pesticide-free food, low-pesticide food, slow food, LOHAS, healthy-functional food, nutritional labels, and expiration dates. In conclusion, appropriate levels of food hygiene and food safety education should be provided by the food industry according to perception of food awareness and practice of food safety.

• Journal of the Korean Chemical Society
• /
• v.20 no.1
• /
• pp.59-72
• /
• 1976

The addition of one mole of zinc chloride to 2.33 moles of sodium borohydride in tetrahydrofuran at room temperature gave a clear chloride-free supernatant solution of zinc borohydride after stirring three days and standing at room temperature.The approximate rates and stoichiometry of the reaction of zinc borohydride with 54 selected organic compounds were determined in order to test the utility of the reagent as a selective reducing agent. Aldehydes and ketones were reduced rapidly, aromatic ketones being somewhat slowly, and the double bond of cinnamaldehyde was not attacked. Acyl halides were reduced rapidly within one hour, but acid anhydrides were reduced at a moderate rate. Carboxylic acids, both aliphatic and aromatic, were slowly reduced to alcoholic stage. Esters were inert to this reagent but a cyclic ester, γ-butyrolactone, was slowly attacked. Primary amides were reduced slowly with partial evolution of hydrogen, whereas tertiary amides underwent neither reduction nor hydrogen evolution. Epoxides and nitriles were all inert, as well as nitro, azo, and azoxy compounds. Cyclohexanone oxime and phenyl isocyanate were reduced slowly but pyridine was inert. Disulfide, sulfoxide, sulfone and sulfonic acids were stable to this reagent.

• Korean Journal of Materials Research
• /
• v.24 no.6
• /
• pp.285-292
• /
• 2014

Commercial activated-carbon used as the electrode material of an electric double-layer capacitor (EDLC) was posttreated with various acids and alkalis to increase its capacitance. The carbon samples prepared were then heat-treated in order to control the amount of acidic functional groups formed by the acid treatments. Coin-type EDLC cells with two symmetric carbon electrodes were assembled using the prepared carbon materials and an organic electrolyte. The electrochemical performance of the EDLC was measured by galvanostatic charge-discharge, cyclic voltammetry, and electrochemical impedance spectroscopy. Among the various activated carbons, the carbon electrodes (CSsb800) prepared by the treatments of coconutshell-based carbon activated with NaOH and $H_3BO_5$, and then heat treated at $800^{\circ}C$ under a flow of nitrogen gas, showed relatively good electrochemical performance. Although the specific-surface-area of the carbon-electrode material ($1,096m^2/g$) was less than that of pristine activated-carbon ($1,122m^2/g$), the meso-pore volume increased after the combined chemical and heat treatments. The specific capacitance of the EDLC increased from 59.6 to 74.8 F/g (26%) after those post treatments. The equivalent series resistance of EDLC using CSsb800 as electrode was much lower than that of EDLC using pristine activated carbon. Therefore, CSsb800 exhibited superior electrochemical performance at high scan rates due to its low internal resistance.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.6
• /
• pp.21-27
• /
• 2019

Cellulose-based carbon fabrics are used in aerospace nozzles have low thermal conductivity and high ablation resistance. However, there is a disadvantage in that the weight is reduced by 70~90% in the pyrolysis process and graphitization process and the residual rate is low when the final carbon fabric is produced. In this study, phosphoric acid as a phosphorus flame retardant and Citric acid as a cross-linking agent were treated on the lyocell fabrics. After that the functional groups were identified and thermal properties were confirmed by FT-IR, XRD and TGA. The yields of the final carbon fabrics were also compared through the pyrolysis and graphitization process. The graphitized yield increased to 8.1% with increasing citric acid to 16 wt% added.

• Journal of the Korean Institute of Gas
• /
• v.16 no.1
• /
• pp.26-32
• /
• 2012

The autoignition temperature is one of the most important physical properties used to determine the flammability characteristics of chemical substances. Despite the needs of the experimental autoignition temperature data for the design of chemical plants, it is not easy to get the data. This study have built and compared partial least squares (PLS) and support vector machine (SVM) models to predict the autoignition temperatures of 503 organic compounds out of DIPPR 801. As the independent variables of the models, 59 functional groups were chosen based on the group contribution method. The prediction errors calculated from cross-validation were employed to determine the optimal parameters of two models. And, particle swarm optimization was used to get three parameters of SVM model. The PLS and SVM results of the average absolute errors for the whole data range from 58.59K and 29.11K, respectively, indicating that the predictive ability of the SVM is much superior than PLS.

• Korean Journal of Environment and Ecology
• /
• v.29 no.4
• /
• pp.564-569
• /
• 2015

In order to discover materials that can be used for OLED, extractions of marine microalgae was screened for photoluminescence(PL) properties and analyzed using gas chromatography-mass spectrometry(GC-MS). The extractions of Nitzschia denticula, Navicula cancellata and Nannochloropsis salina showed PL spectroscopy among fourteen marine microalgae species. The selected three fractions from three microalgae were analyzed by GC-MS. According to the results, it was found that the identified organic light-emitting materials can be subdivided into three functional groups based on imidazole, purine and quinoline. These chemicals are considered to have a strong relationship with PL spectroscopy for OLED materials.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.22 no.2
• /
• pp.17-26
• /
• 2014

In this study, the adsorption efficiency of mixed heavy metals from an aqueous solution was examined using bentonite. The physical and chemical properties of bentonite was analyzed via scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FT-IR), Further, heavy metal adsorption was characterized using Freundlich and Langmuir equations. Equilibrium adsorption data were fitted well to the Langmuir model for bentonite. The adsorption uptake of heavy metals was high and followed the order $Pb^{2+}$ > $Cu^{2+}$ > $Cd^{2+}$ > $$Zn^{2+}{\sim_=}Ni^{2+}$$. The results also showed that adsorption uptake slightly increased as increasing pH from 6 to 10. The bentonite surface was observed viay SEM and FT-IR; Si-O and Si-O-Al were found to be the main functional groups by FT-IR analysis. From these results, the adsorption mechanisms of heavy metal were not only surface adsorption and ion exchange, but also surface precipitation. Thus, bentonite could be a useful adsorbent for treating heavy metal in aqueous solution.

• Journal of Adhesion and Interface
• /
• v.20 no.3
• /
• pp.110-115
• /
• 2019

Graphene oxide has been gathering interests as a way to exfoliate graphene. Since the oxidation group of graphene oxide can hydrogen bond with various functional groups, tremendous efforts have been actively conducted to apply various applications. However, graphene oxide alone cannot substantially possess the mechanical properties required for the practical application. Therefore, in this study, polydopamine, which is a bio-mimetic mussel protein-inspired material, was combined with graphene oxide to form a large-area composite membrane at the liquid-gas interface. In addition, the morphology of the polydopamine-graphene oxide composite thin film was also controlled to obtain a composite membrane having a nano-wrinkle structure. It can be expected to be used in the next generation seawater desalination membranes or carbon composites because it can form mechanically superior and sophisticated nanostructures.