• Journal of Ginseng Research
• /
• v.15 no.3
• /
• pp.200-204
• /
• 1991

Densities and larval food habits of Holotrichia titanis belonging to Melolonthinae, and of Anomala corpulenta and A. mfocuprea belonging to Rutelinae, collected from surroundings of ginseng fields, were investigated to determine potentia]s as ginseng pests in scarabaeids. H. titanis had similar food habit to the ginseng pests, H. morosa and H. diomphalia, although the density of H. titanis was relatively low during the period of survey, which indicates that the scarabaeid may have potentials to be a major pest with build-up or the population in the fields. However, A. corpulenta and A. rufacuprea with higher populations than H. morose and H. dicmphalia had no or low potency as ginseng pests since they had little preference to ginseng roots or did not feed on these. The latter two species in Rutelinae showed different food habits in relation to dead organic matter.

• 한국생물공학회:학술대회논문집
• /
• 2000.04a
• /
• pp.271-274
• /
• 2000

A study was carried out to select a nitrogen source and the optimize the C/N ratio for the maximum cell growth of Phaffia rhodozyma in fed-batch culture. The yeast extract was the best organic nitrogen source. In the batch culture experiments, the highest cell yield was obtained 0.575 g-cell/g-glucose from 10 g/L and 10 g/L yeast extract. In the fed-batch experiments, the maximum cell concentration was obtained 33.1 g/L from the C/N ratio of 2:1 while the astaxanthin concentration of cell was Increased by increasing the C/N ratio, of feed medium.

• Transactions on Electrical and Electronic Materials
• /
• v.14 no.5
• /
• pp.263-267
• /
• 2013

New random copolymers of phenylsilyl- and alkoxy-substituted phenylenevinylene, DMPS(9)-MEH(1)-PPV, DMPS(5)- MEH(5)-PPV and DMPS(1)-MEH(9)-PPV, have been synthesized by the Gilch dehydrohalogenation route, and the light-emitting properties of these polymers have been studied. The synthesized polymers were completely soluble in common organic solvents, and exhibited good thermal stability, almost up to $380^{\circ}C$. They showed UV-visible absorbance and photoluminescence (PL) in the ranges of 422-510 and 513-590 nm, respectively, according to their feed ratios. Electroluminescent devices were fabricated with these polymers as emitting layers, and ITO and Al as anode and cathode, respectively. DMPS(1)-MEH(9)-PPV, DMPS(5)-MEH(5)-PPV and DMPS(9)-MEH(1)-PPV exhibited EL emission maxima at 575 nm, 565 nm, and 541 nm, respectively.

• Journal of Korean Society for Atmospheric Environment
• /
• v.17 no.4
• /
• pp.355-362
• /
• 2001

Adsorption isotherms of dichloromethane and 1, 1, 2-trichloro-1,2,2-trifluoroethane on an activated carbon pellet, Norit B4, were studied. For these chemicals, Sips equation gave the best fit for the single component adsorption isotherm. The adsorption affinity on activated carbon was greater for dichloromethane than that of 1, 1, 2-trichloro-1,2,2-trifluoroethane. An experimental and theoretical study was made for the adsorption of dichloromethane and 1, 1,2-trichloro-1,2,2-trifluoroethane in a fixed bed. Experimental results were used to examine the effect of operation variables, such as feed concentration, flow rate and bed height. Intraparticle diffusion was able to be explained by surface diffusion mechanism. An adsorption model baked on the linear driving force approximation (LDFA) was found to be applicable to fit the experimental data.

• Journal of Korean Society of Water and Wastewater
• /
• v.20 no.4
• /
• pp.535-543
• /
• 2006

The Ozone oxidation process was applied to increase the efficiency of reuse process when treating the secondary effluent by the membrane system. This paper focus on decreasing efficiency of membrane fouling, because of membrane fouling reduction by ozone and evaluation of application of the ozone oxidation. The feed water was secondary effluent from BNR process. The result shows that the ozone pretreatment can reduce membrane fouling effectively. Also, the improvement of treated water quality was obvious. The reduction of the membrane fouling led decrease of following pollutant and increase of lnner adsorptive ability of hydrophilic organic matter and decrease of molecular weight. MF membrane process alone can meet the domestic reuse water standards. And ozone pretreatment process also can increase the removal rates of turbidity, COD, nitrogen, and color.

• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.6
• /
• pp.917-922
• /
• 2011

Adsorption characteristics of boron on activated carbon was investigated in order to evaluate the use of activated carbon for the removal of boron in desalination processes using SWRO. Boron was removed ranging from 54~60% when the concentration of activated carbon was 1,000 mg/L in 6 hours under the initial boron concentration of 5 mg/L. The removal of boron increased by 20~22% with the increase of pH from 5 to 9. Organic matter had adverse effect on the adsorption of boron on activated carbon. Boron removal decreased by 10-12% when EDTA was added at 1 mg/L under 5 mg/L of boron and 200mg/L of activated carbon. In this results, activated carbon would be a good candidate for a pretreatment of desalination processes by SWRO from the view of mitigating the feed boron concentration to RO and meeting the effluent boron concentration without post-treatment after RO.

• Journal of Korean Society of Water and Wastewater
• /
• v.28 no.1
• /
• pp.135-142
• /
• 2014

The performance of inorganic sludge separation system is evaluated. Anaerobic digester effluent sludge is used for feed sludge of this system and hydrocyclone is used for inorganic sludge separation. For phosphorus removal and recovery $MgCl_2$ is pumped into MAP growth tank, a component of inorganic sludge separation system. Using this system inorganic sludge which contained less than 40 % of organic matter can be discharged stably and the maximum amount of separated inorganic sludge is 13.4 % of influent sludge based on dry solid. The amount of phosphorus recovered as MAP(as P) is 16.7 % to influent T-P.

• Asian-Australasian Journal of Animal Sciences
• /
• v.4 no.2
• /
• pp.177-182
• /
• 1991

Nutrient evaluation of sago fibre showed that the fibre has potential and could be utilized as feed for ruminants. However, as a source of nutrients, it has limitations arising from low intake, digestibility, crude protein and minerals content. The present study showed that the sago fibre is low in crude protein (3.3%) and high in neutral detergent fibre (72.5%) and acid detergent lignin (25.8%) contents. Treatment of sago fibre with urea increased the crude protein content from 3.3 to 16.7%. Both urea and sodium hydroxide treatment decreased the neutral detergent fibre level from 72.5 to 59 and 56.5%, respectively. Rumen degradation of sago fibre by nylon bag showed that both urea and sodium hydroxide treatments increased dry matter and organic matter disappearance of the fibre significantly. In vivo digestibility of 2% urea treated sago fibre was 47.5% and intake of the fibre was 1.57% of body weight of the lamb.

• Journal of Korean Society for Atmospheric Environment
• /
• v.17 no.E4
• /
• pp.145-155
• /
• 2001

Simple mass balance method was developed to estimate the contribution of two major fugitive dust sources in the Port of Incheon to a nearby residential area in this study. Using the relatively small number of TSP data as well as the data on mass fraction of Fe and organic materials in the sampled dust, our simplified method demonstrated its ability to estimate the contribution of each fugitive source to a specific location including the residential area with relatively reasonable accuracy. It is clear from this simple method can be applied to the situation where two major fugitive dust sources are responsible for the high TSP concentration around the source area and there are clear marker chemicals representing the characteristics of the fugitive dust sources.

• Environmental Engineering Research
• /
• v.21 no.1
• /
• pp.45-51
• /
• 2016

Membrane bioreactor (MBR) and reverse osmosis (RO) membrane system was applied to the treatment and reclamation of textile wastewater in Thailand. An experiment was carried out to determine the fouling behavior and effect of anti-scalant and biocide addition to flux decline and its recovery through chemical cleaning. The RO unit was operated for one month after which the fouled membranes were cleaned by sequential chemical cleaning method. RO flux was found rapidly declined during initial period and only slightly decreased further in long-term operation. The main foulants were organic compounds and thus sequential cleaning using alkaline solution followed by acid solution was found to be the most effective method. The provision of anti-scalant and biocide in feed-water could not prevent deposition of foulant on the membrane surface but helped improving the membrane cleaning efficiencies.