• Transactions on Electrical and Electronic Materials
• /
• 제14권5호
• /
• pp.263-267
• /
• 2013

New random copolymers of phenylsilyl- and alkoxy-substituted phenylenevinylene, DMPS(9)-MEH(1)-PPV, DMPS(5)- MEH(5)-PPV and DMPS(1)-MEH(9)-PPV, have been synthesized by the Gilch dehydrohalogenation route, and the light-emitting properties of these polymers have been studied. The synthesized polymers were completely soluble in common organic solvents, and exhibited good thermal stability, almost up to $380^{\circ}C$. They showed UV-visible absorbance and photoluminescence (PL) in the ranges of 422-510 and 513-590 nm, respectively, according to their feed ratios. Electroluminescent devices were fabricated with these polymers as emitting layers, and ITO and Al as anode and cathode, respectively. DMPS(1)-MEH(9)-PPV, DMPS(5)-MEH(5)-PPV and DMPS(9)-MEH(1)-PPV exhibited EL emission maxima at 575 nm, 565 nm, and 541 nm, respectively.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2002년도 추계학술발표논문집
• /
• pp.181-184
• /
• 2002

본 연구에서는 ITO (indium tin oxide) /glass 투명기판 위에 다층구조의 OELD 소자를 진공 열증착법으로 제작하였다. 상부 전극과 하부 전극의 종류에 따른 전류밀도-전압 특성을 측정하였으며, 열적 안정성이 다른 정공 수송충을 사용하여 소자를 제작하고 전기ㆍ광학적 특성을 측정하였다. 사용된 저분자 유기화합물은 발광층으로 녹색의 발광을 가지는 Alq₃(tris-(8-hydroxyquinoline)aluminum)를 사용하였고 정공수송 및 주입층으로는 TPD(triphenyl diamine), α-NPD 그리고 CuPc (Copper phthalocyanine)를 각각 증착하였다. 하부 전극으로 사용된 ITO 투명전극은 면저항이 적을수록 전류밀도가 증가하는 것을 볼 수 있고, 상부 전극의 종류에 따른 전류밀도-전압 특성을 분석한 결과 일함수가 낮은 전극일수륵 전류밀도가 높아지는 것으로 나타났다. 유리전이온도(Tg)가 상대적으로 높은 재료인 α-NPD를 정공수송충으로 사용한 경우 더 양호한 특성을 나타내었다.

• 한국응용과학기술학회지
• /
• 제16권1호
• /
• pp.41-44
• /
• 1999

Recently, high luminance and efficiency were realize in organic thin film electroluminescence (EL) cells with multilayer structures including an emitting layer (EML), hole transporting layer (HTL), and an electron transporting layer (ETL). In this study, Bis(10-hydroxybenzo[h]quinolinato)beryllium (Bebq2) was synthesized. PL and EL characteristics of their thin film were investigated by fabricating the devices having a structure of ITO/PVK/Bebq2/Al, ITO/PVK dispersed with TPD/Bebq2/Al. The EL color of these device was greenish and the wavelength of their EL peaks was located, respectly, at 495nm, and 492.5nm.

• Bulletin of the Korean Chemical Society
• /
• 제31권10호
• /
• pp.2884-2888
• /
• 2010

Two red fluorescent DCJTB derivatives (Red 1 and 2) based on modified pyrans were synthesized and their electroluminescent properties were investigated. Multilayered OLEDs were fabricated with the device structure of ITO/NPB (40 nm)/Red 1, 2 or DCJTB (0.5 or 1%): $Alq_3$ (20 nm)/$Alq_3$ (40 nm)/Liq (2 nm)/Al. All devices exhibited efficient red emissions. In particular, a device containing emitter Red 2 as a dopant in the emitting layer, the maximum luminance was $8737\;cd/m^2$ at 12.0 V, the luminous and power efficiencies were 2.31 cd/A and 1.25 lm/W at $20\;mA/cm^2$, respectively. The peak wavelength of the electroluminescence was 638 nm with the CIE (x,y) coordinates of (0.63, 0.36) at 7.0 V.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.350-353
• /
• 2009

While the comparatively high MW would make the employed molecules extremely difficult to vacuum-evaporate, and result in poor device performance, the wet-process has been proven to be quite effective and convenient as usual to the fabrication of high-efficiency OLEDs composing high MW components.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 추계학술대회 논문집
• /
• pp.116-119
• /
• 1997

In this paper A double-layer organic electroluminescent(EL) device was fabricated using a TPD(N,N'-dipheny] -N,N'-bis(3-methylphenyl)-[1,1'-biphenyl]-4.4'-diamine: aromatic diamine), as a hole-transport material and tris (8-hydroxy quinolinate) aluminum(Alq$_3$) as a an emiting material and its performance characteristics were investigated. structure of devices is ITO/TPD/Alq$_3$/Al. we have fabricated hole transport layer of two types. Doping material of Hole Transport material is Poly(methyl methacrylate)(PMMA) and PEI(Poly-Ether-Imide). Carrier injection from the electrodes to the doped PMMA and PEI layer through the dopants and concomitant electroluminescence from Alq$_3$were observed. Green emission with luminance of 40cd/m$^2$was achieved at a drive voltage of 30V

• 한국표면공학회지
• /
• 제29권5호
• /
• pp.449-453
• /
• 1996

In order to improve EL performance, anthracene was doped into the 8-hydroxyquinoline-aluminum (Alq$^3$) light-emitting layer of organic double layered EL cells. The EL cells were fabricated on ITO glass substrates by vacuum deposition. Doping of anthracene to the light-emitting $Alq^3$layer was performed by means of co-evaporation. The doping concentration was changed in the range of 5 to 30 wt.%. It was confirmed that anthracene doping of appropriate concentration increased the available current density and brightness of the EL cells. Carrier mobility of the $Alq^3$ layer was measured by time of flight method. The influence of anthracene doping on the cell performance was discussed.

• 한국응용과학기술학회지
• /
• 제17권3호
• /
• pp.174-177
• /
• 2000

The effect of a-sexithiophene(${\alpha}-6T$) layers on the light emitting diode (LED) were studied. The ${\alpha}-6T$ was used for a buffer layer in electroluminescent (EL) devices. Enhanced carrier (hole) injection and improved emission efficiency were observed. Carrier injection characteristics were investigated as a function of ${\alpha}-6T$ later thickness. The efficiency of the electroluminescence was proportional to the thickness of ${\alpha}-6T$ layer. The highest efficiency was observed 600A of ${\alpha}-6T$ later, which was about 1.5 times higher than that of device without ${\alpha}-6T$ later. The device with a-6T showed an operation voltage lowered by 2V. The ${\alpha}-6T$ layer can substitute hole blocking layer, and control charge injection properties.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2011년도 제44차 학술발표회
• /
• pp.63-63
• /
• 2011

The donor-${\pi}$-acceptor (D-${\pi}$-A) chromophoric dye system has received great attention in variety fields such as electroluminescent materials, sensors and optoelectronic devices. There are many research activities focused on the development for abovementioned application materials with the high-performance properties. In the previous work, we are reported that novel D-${\pi}$-A dye, 2-[4-(9H-carbazol-9-yl)benzylidene]-2,3-dihydroinden-1-one, is successfully attained and exhibited a positive fluorescence solvatochromism. In this work, the molecular structure and packing geometry of 2-[4-(9H-carbazol-9-yl)benzylidene]-2,3-dihydroinden-1-one was discussed by their conformational structure. Their single yellow prism crystal having approximate dimensions of $0.30{\times}0.10{\times}0.10$ mm was carried out with a Rigaku RAXIS RAPID imaging plate area detector with graphite monochromated $CuK_{\alpha}$ radiation. Their crystal structure were solved by using the CrystalStructure crystallographic software package.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1609-1611
• /
• 2002

Multi-layer organic electroluminescent(EL) devices with Al-CsF composite as a cathode were fabricated. This device privides low driving voltage and high quantum efficiency. CsF is evaporated onto and diffuse into electron transport layer. $Alq_3$. The Fermi level of $Alq_3$ moves towards the LUMO level.