• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제48권5호
• /
• pp.379-384
• /
• 1999

Langmuir-Blodgett(LB) films which have high ordered orientation and ordering structure are fabricated by LB method which deposit the ultra-thin films of organic materials at a molecular level. The electrical characteristics of stearic acid LB ultra-thin films for the horizontal direction were investigated to develop the gas sensor using LB ultra-thin films. The optimal deposition condition to deposit the LB ultra-thin films was obtained from $\pi-A$ isotherms and the deposition status of stearic acid LB ultra-thin films was verified by the measurement of deposition ratio, UV-absorbance, and electrical properties for LB ultra-thin films. The conductivity of stearic acid LB ultra-thin films for horizontal direction was about $10_{-8}[S/cm]$. The activation energy for LB ultra-thin films with respect to variation of temperature was about 1.0[eV], which was correspond to semiconductor material. The response characteristics for organic gas were confirmed by measuring the response time, recovery time, and reproducibility of the LB ultra-thin to each organic gas. Also, the penetration and adsorption behavior of gas molecule were confirmed through the organic gas response characteristics of LB ultra-thin films with respect to temperature.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 춘계학술대회 논문집 센서 박막재료
• /
• pp.57-60
• /
• 2001

The characterization of organic Metal/Insulator/Metal(MIM) devices were investigated from LB films. The physicochemical properties of the LB films were by UV absorption spectrum and AFM. We give pressure stimulation into organic thin films and then manufacture a device under the accumulation condition that the state surface pressure is 2, 10, 30[mN/ml The stable images are probably due to a strong interaction between the monolayer film and glass substrate. We are unable to obtain molecule resolution in images of the films but did see a marked contrast between images of the bare substrate and those with the network structure film deposited onto it.

• 한국전기전자재료학회논문지
• /
• 제14권3호
• /
• pp.215-222
• /
• 2001

Polyaniline-Camphorsulfonic Acid Emeraldine Salt(PANI-CSA ES) was prepared by doping Polyaniline Ermeralidine Base(PANI EB) with DL-10-Camphorsulfonic Acid(CSA). PANI-CSA ES was solved in an organic solvent by ultrasonification for different periods of time and its surface resistivity was measured. Several PANI-CSA ES solutions solved in different organic solvents were prepared and their surface resistivities were measured. Thermal stability of film casted with PANI-CAS ES solution in m-cresol was estimated by measuring its surface conductivity and the content of this moisture and organic solvents. PANI-CSA ES was blended with different polymeric binders to improve its physical properties and the surface resistivities of several kinds of PANI-CSA ES blends were measured as a function of the content of PANI-CSA ES. PANI-CSA ES polymerized by 1-step oxidative polymerization was prepared and its surface resistivity was measured.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.203-204
• /
• 2008

Using various surfactants, multi-walled carbon nanotube (MWNT) was dispersed in organic solvent, isopropylalcohol(IPA). To refine the MWNT and give the functional group, MWNT was treated with sulfuric acid/nitric acid(v/v=3/1). The cationic, nonionic and anionic surfactants were used as MWNT dispersion agents in the organic solvent. Dispersion effect of various surfactants was observed by optical microscope and HR-TEM. Surface resistivities of MWNT dispersions were measured after coating on PET film. MWNT was dispersed well by poly vinyl pyrrolidone(PVP), nonionic surfactant.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.287-290
• /
• 2000

We give pressure stimulation into organic thin films and then manufacture a device under the accumulation condition that the state surface pressure is 20[mN/m]. LB layers of Arac. acid deposited by LB method were deposited onto y-type silicon wafer as x, y, z-type film. In processing of a device manufacture, we can see the process is good from the change of a surface pressure for organic thin films and transfer ratio of area per molecule. The structure of manufactured device is Au/arachidic acid/Al, the number of accumulated layers. Also, we then examined of the MIM device by means of I-V. The I-V characteristic of the device is measured from 0 to +2[V].

• 유기물자원화
• /
• 제17권4호
• /
• pp.59-65
• /
• 2009

돼지의 장 및 분변에서 분리한 14종의 유산균으로부터 항세균 활성물질을 분석하였다. 각 균주의 세포배양액을 대상으로 여러 종류의 단백질 분해효소와 열, 알칼리 처리 등을 수행한 후 활성도를 조사한 결과, 효소 및 열처리 시료에서는 활성도가 유지되었으나, 1M의 NaOH로 중화 처리한 시료에서는 활성도가 사라짐에 따라, 항세균 활성물질이 단백질성이라기보다 유기산일 가능성이 큰 것으로 나타났다. Sep-pak $C_{18}$ Cartridges을 이용한 음이온 추출실험과 Bio-LC system을 이용한 high performance anion exchange chromatography를 실시하여 물질을 정제한 결과, 주요 활성물질로 옥살산, 구연산, 젖산 및 초산 등, 4종류의 유기산이 검출되었다. 이중 젖산은 각 균주에 따라 전체 유기산의 54~77%를 차지하는 것으로 나타나 유기산 중에서도 일차적인 항세균 활성물질일 것으로 추정된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 춘계학술대회 논문집 전자세라믹스 센서 및 박막재료 반도체재료 일렉트렛트 및 응용기술
• /
• pp.104-107
• /
• 2000

It is well known that the state of existence of molecules on the surface of water changes during compression of the molecules. Electric methods, such as the measurement of the surface potential or displacement current, are also useful for investigating dynamic changes of the molecular state on the water surface during compression. Maxwell-Displacement-Current(MDC) measuring technique has been applied to the study of monolayers of Arachidic acid and L-$\alpha$-Dimyristoyl Phosphatidylcholine(L-$\alpha$-DMPC). The displacement current was generated from monolayers on a water surface by monolayer compression. Displacement current was generated in the gas state, gas/liquid state, and liquid state in the course of monolayer compression. The researchers examined diplacement current of electric conduction organic monolayer generated due to orient change of monolayers alkylchain.

• 청정기술
• /
• 제22권4호
• /
• pp.250-257
• /
• 2016

As an attempt to replacing petroleum-based chemicals with bio-based ones, synthesis of furfural from biomass-derived xylose attracts much attention in recent days. Conventionally, furfural from xylose has been produced via the utilization of highly corrosive, toxic, and environmentally unfriendly mineral acids such as sulfuric acid or hydrochloric acid. In this study, microwave-assisted biphasic reaction process in the presence of novel bio-based heterogeneous acid catalysts was developed for the eco-benign and effective synthesis of furfural from xylose. The microwave was irradiated for reaction acceleration and a biphasic system consisting of $H_2O$ : MIBK (1 : 2) was designed for continuous extraction of furfural into the organic phase in order to reduce the undesired side products formed by decomposition/condensation/oligomerization in the acidic aqueous phase. Moreover, sulfonated amorphous carbonaceous materials were prepared from wood powder, the most abundant lignocellulosic biomass. The prepared catalysts were characterized by FT-IR, XPS, BET, elemental analysis and they were used as bio-based heterogeneous acid catalysts for the dehydration of xylose into furfural more effectively. For further optimization, the effect of temperature, reaction time, water/organic solvent ratio, and substrate/catalyst ratio on the xylose conversion and furfural yield were investigated and 100% conversion of xylose and 74% yield of furfural was achieved within 5 h at $180^{\circ}C$. The bio-based heterogeneous acid catalysts could be used three times without any significant loss of activity. This greener protocol provides highly selective conversion of xylose to furfural as well as facile isolation of product and bio-based heterogeneous acid catalysts can alternate the environmentally-burdened mineral acids.

• 산업기술연구
• /
• 제21권A호
• /
• pp.17-26
• /
• 2001

The fatigue strength of SM55C has significantly decreased by 83% compared with atmosphere where distilled exists due to strong erosive action of acid fog. The reason is inferred in a way that strong acid erosive material such as acid fog act and give rise to multi-site crack on the surface. Several fatigue clacks occurred under the acid fog repeat the process of division and unification on the surface and form a long non-propagating crack throughout the circumference of experimented steel. However, in the depth, many parts do not show much trace of unification, and the depth is not as big as the one of normal crack shape. 10% of $CaCl_2$ causes strong erosive reaction to material. Then eventually make the life of fatigue shooter. On the other hand, 20% of $CaCl_2$ beings about oxidized material organic crack closing due to weak erosive reaction.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.227-230
• /
• 2004

As the organic acids were added in the slurry, zeta potential of alumina was changed to negative value and IEP value was shifted from alkaline to acidic pH. In citric acid based slurry, Cu surface continuously dissolved and etching depth linearly increased. On the contrary, passivation layer was grown on Cu surface in oxalic acid based slurry. As the platen rotation speed increased, Preston coefficient decreased in both slurries. With oxalic acid based slurry, at low velocity, removal rate is high value because of high friction force compared to citric acid based slurry. As platen velocity increased, removal of Cu in citric acid based slurry became higher value than oxalic acid based slurry. Typical lubrication behaviors were observed in both slurries. As Sommerfeld number increased, COF values gradually decreased and then re-increased. It indicated that lubrication was changed to direct contact or semi-direct contact mode to hydro-lubrication mode.