• 한국세라믹학회지
• /
• 제30권1호
• /
• pp.34-40
• /
• 1993

ORMOSIL was synthesized with inorganic precursor, TEOS and organic precursor, PDMS, and the variation of composite properties according to the concentration of HCl, solvent content and reaction time were studied. As the concentration of HCl increased, condensation reaction was well proceeded and more regularly distributed network was observed. Increase in reactivity was found with the amount of solvent, and composite had a tendency of forming more porous microstructure as reaction time was increased, which had no influence on the bonding degree.

• 약학회지
• /
• 제24권3_4호
• /
• pp.159-165
• /
• 1980

Tetrathiocyanatocobaltate[II] forms complexes with tertiary amine salts or quarternary ammonium salts which were extractable from aqueous solution by organic solvent. In order to study composition of the complex, the colored crystalline complexes produced were evaluated with elemental analysis, infrared and mass spectra. And also a novel spectrophotometric method for the determination of tertiary amine salt or quarternary ammonium salt with tetrathiocyanatocobaltate[II] was established by organic solvent extraction within coefficient of variation of 1.06-1.35%.

• 대한약학회:학술대회논문집
• /
• 대한약학회 2003년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.1
• /
• pp.297.1-297.1
• /
• 2003

Organic solvent-based enteric coating technology using hydroxypropyl methylcellulose phthalate (HPMCP) has been developed for many years due to low water solubility of HPMCP. In this work, aqueous HPMCP nanoparticles (HPMCP-NPs) were prepared by neutralization emulsification method using HPMCP powder and ammonium hydroxide (NH40H) in the absence of any organic solvent and emulsifier. (omitted)

• 한국응용과학기술학회지
• /
• 제29권2호
• /
• pp.199-204
• /
• 2012

유기 박막 트랜지스터 (organic thin-film transistors; OTFTs)는 유기 반도체 그리고 디스플레이와 같은 분야에 그들의 잠재적인 응용 가능성 때문에 많은 주목을 받고 있다. 하지만 급격한 산화 혹은 낮은 전기 이동도와 같은 단점으로 인하여 n-형 물질은 p-형 물질에 비해서 상대적으로 많은 연구가 진행되지 못한 실정이다. 따라서 본 논문에서는 n-형 반도체 물질인 [6,6]-phenyl-C61-butyricacidmethylester (PCBM)과 Poly(4-vinylphenol) (PVP)을 유기 절연막으로 이용하여 o-dichlorobenzene, toluene and chloroform과 같은 다양한 유기 용매를 사용한 플라스틱 기판에 유기트랜지스터를 제작하였고 유기 용매가 ODCB 경우 전계 효과 이동도는 약 0.034 $cm^2/Vs$ 그리고 점멸비(on/off ratio)는 ${\sim}1.3{\times}10^5$ 으로 향상 되었다. 다양한 유기 용매의 휘발성에 따라서 PCBM TFT의 전기적 특성에 미치는 영향을 규명하였다.

• 한국염색가공학회지
• /
• 제9권4호
• /
• pp.20-27
• /
• 1997

As a non-aqueous dyeing method, organic solvent dyeing was discussed, The dye uptakes on PET and the solubilities of C. I. Disperse Violet 1 in 24 kinds of organic solvents including water were investigated, and the partition coefficients in PET- solvents system were also obtained from their isotherms. Contrary to in the other solvents, the dye uptake of C. I. Disperse Violet 1 on PET in hexane was even much higher, and also considerable in cyclohexane. The logarithmic plot of the dye uptakes versus the solubilities showed that the dye uptakes are linear and inversely proportional to the solubilities. The effect of $T_g$ decrease of PET in organic solvents to dye uptake seems to be very small relative to the effect of solubility, and so negligible.

• 한국전기전자재료학회논문지
• /
• 제37권4호
• /
• pp.451-456
• /
• 2024

Organic photovoltaic (OPV) devices have attracted attention due to their high efficiency and simple manufacturing process. Applying an overlayer to OPV devices is one way to improve their performance because it can improve charge extraction and suppress vertical phase separation. In addition, dichloromethane (DCM) was used as an orthogonal solvent to minimize the effect on other layers. However, an coating problems due to the use of DCM were found, which affects surface morphology as rough or peeling. Additional research efforts are needed to solve these problems, and optimal results are expected to be obtained by utilizing various buffer layers or selective organic solvents.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.353-356
• /
• 2001

The relation between the flocculation and dispersion of metal oxide powders and the properties of solvents, such as dielectric constant and solubility parameter, was investigated for TiO$_2$, $Al_2$O$_3$and Fe$_2$O$_3$particles. The particle size and median diameter of these metal oxides were measured in many organic solvents, from which the effect of solvents on the flocculation and dispersion of metal oxide powders was considered. The metal oxide powders of TiO$_2$, $Al_2$O$_3$and Fe$_2$O$_3$tend to disperse in a solvent of higher polarity, whereas they are apt to flocculate in a solvent of low dielectric constant, because the Hamaker constant between the particles becomes larger in such a solvent. There we, however, some solvents that do not obey these tendencies. It is possible to evaluate the flocculation and dispersion of these metal oxide powders in many solvents by using numeral balances of Hansen’s three-dimensional solubility parameter (f$_{d}$, f$_{p}$ and f$_{h}$). There exists a solvent giving the optimal dispersion for each metal oxide, and the optimal dispersion point of f$_{d}$, f$_{p}$ and f$_{h}$ is determined by the combination of various metal oxide powders and solvents.nts.nts.nts.

• 공업화학
• /
• 제28권4호
• /
• pp.420-426
• /
• 2017

최근 특정 용매에 대한 저항성이 있고 특정 분획분자량을 가지는 고분자 분리막을 통해 용매 또는 용질의 분리가 이루어지는 용매저항성 나노여과막에 대한 연구가 많이 이루어지고 있다. 이러한 분리막의 필수조건은 우수한 물성과 용매저항성을 가지는 것인데 현존하는 상업용 고분자 중 가장 내열성이 좋다고 알려진 폴리벤즈이미다졸은 고유의 용매저항성 역시 뛰어나지만 가교되었을 때 강한 유기용매에도 녹지 않는 특성을 가진다. 따라서 본 연구에서는 이러한 폴리벤즈이미다졸의 용매저항성을 이용한 나노여과막의 적용 가능성에 대하여 논의하고자 하였다. 분리막의 제조는 비용매유도상전이법을 통해 실시하였고 전계방출형 주사전자현미경을 통해 나노여과막으로서 적절한 복합막을 형성하는 것을 확인하였다. 또한, 가교유무에 따른 용매의 투과성능을 확인하였고 장시간 운전을 통하여 용매에 대한 내구성에 따른 안정성 또한 확인하였다. 투과도 실험은 물, 에탄올, 벤젠, N, N-dimethylacetamide (DMAc), n-methyl-2-pyrrolidone (NMP) 다섯 가지 용매에 의해 실시되었으며 각각의 초기 플럭스는 $6500L/m^2h$ (Water, 2 bar), $720L/m^2h$ (DMAc, 5 bar), $185L/m^2h$ (Benzene, 5 bar), $132L/m^2h$ (NMP, 5 bar), $65L/m^2h$ (Ethanol, 5 bar)를 나타내었고 분리막의 종류에 따라 2-5 bar의 압력을 적용하였다.

• 생약학회지
• /
• 제30권1호
• /
• pp.59-64
• /
• 1999

Supercritical fluid extraction (SFE) technique was applied to extract cytotoxic substances from five medicinal plants including Angelica gigas, Angelica acutiloba, Aralia cordata, Spirodela polyrhiza, Bupleurum falcatum, and Acanthopanax sessiliflorus. The cytotoxicities against P388, A549, and HL-60 cell lines were determined for the supercritical carbon dioxide extracts of five plant materials employed and were compared with those of the conventional organic solvent extracts such as n-hexane, $CHCl_{3}$, and MeOH to evaluate the SFE as an alternative method to conventional organic solvent extraction. In most cases, the SFE extracts of plant materials showed enhanced cytotoxicities when compared with those of other organic solvent extracts. In addition, the optimum temperature and pressure of SFE for extraction of the cytotoxic substances were largely affected by both the plant species and the cell lines tested. These results suggested that SFE could be an alternative to the conventional organic solvent method for the selective extraction of cytotoxic compounds from plants.

• 환경위생공학
• /
• 제17권3호
• /
• pp.99-109
• /
• 2002

Charcoal $tube/CS_2$ method are more popularly used than any other in the measurement of the working environment for the exposure evaluation of organic solvent, but it is some weak points that the lower accuracy can be obtained on the polar materials and within the range of the low concentration. Thus solvent desorption method has been developed to make accuracy higher and to overcome some weak points. However, because of high price of adsorption tube for thermal desorption and the short of study on its application to the working environment, it is not popularly used in the domestic industrial hygiene fields. This dissertation aims to develop thermal desorption and adsorption tubes for measuring organic solvents in the working environment, by comparing and analyzing breakthrough condition and adsorption capacity with ACF. Specific surface area of ACF used in this study is wider than the one of AC and micropore of ACF related with adsorption has been developed, and adsorption velocity and adsorption amount are very excellent by linking a pore of surface and an inside well into micropore. 1. Result of analysis on physical characteristics of adsorbent, the specific surface area of ACF was 1.3 times higher than that of AC. Distribution ratio of micropore related to adsorption was 94% on ACF and AC. Result of SEM, micropore of the AC is opened to the surface. In contrast, ACF shows that extremely fast adsorption speed. Because of micropore are exposed on the surface and penetrate through each other. 2. Breakthrough characteristics of adsorbents was not different from slop of breakthrough curve. The effluent concentration reaches 10% of initial concentration($C_{out}/C_{in}=0.1$, break point) of ACF was 30~316min longer than that of AC. Therefore, the adsorption capacities of ACF was 1.1~4.6 times higher than that of AC. ACF can be used as a proper adsorbent for measurement of organic solvent.