• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.3
• /
• pp.57-61
• /
• 2016

In order to protect the solar cells from the moisture and oxygen, we evaluated the electrical and optical properties for the $Cu(In,Ga)Se_2$ (CIGS) solar cells which were prepared by the spray coating method. Generally, the EVA (ethylene-vinyl acetate) films are laminated to protect the CIGS flexible solar cells, which results in a high cost process due to complicated devices. In this study, we tried to prepare the protection layers of the flexible CIGS flexible solar cells by using spray coating method instead of conventional laminating films in order to reduce the device weight as well as the process time. The CIGS solar cells with spray coating method showed an enhanced efficiency than the before treated sample (2.77% to 2.93%) and relatively proper water vapor transmission rate of the solar cells about 62.891 gm/[$m^2-day$].

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.441-443
• /
• 2008

A non-vacuum process for fabrication of $CuInSe_2$ (CIS) absorber layer from the corresponding Cu, In solution precursors was described. Cu, In solution precursors was prepared by a room temperature colloidal route by reacting the starting materials $Cu(NO_3)_2$, $InCl_3$ and methanol. The Cu, In solution precursors were mixed with ethylcellulose as organic binder material for the rheology of the mixture to be adjusted for the doctor blade method. After depositing the mixture of Cu, In solution with binder on Mo/glass substrate, the samples were preheated on the hot plate in air to evaporate remaining solvents and to burn the organic binder material. Subsequently, the resultant CI/Mo/glass sample was selenized in Se evaporation in order to get a solar cell applicable dense CIS absorber layer. The CIS absorber layer selenized at $530^{\circ}C$ substrate temperature for 30 min with various Se gas evaporation temperature was characterized by XRD, SEM, EDS.

• Journal of the Microelectronics and Packaging Society
• /
• v.20 no.2
• /
• pp.1-9
• /
• 2013

Recently flexible electronic devices have attracted a great deal of attention because of new application possibilities including flexible display, flexible memory, flexible solar cell and flexible sensor. In particular, development of flexible memory is essential to complete the flexible integrated systems such as flexible smart phone and wearable computer. Research of flexible memory has primarily focused on organic-based materials. However, organic flexible memory has still several disadvantages, including lower electrical performance and long-term reliability. Therefore, emerging research in flexible electronics seeks to develop flexible and stretchable technologies that offer the high performance of conventional wafer-based devices as well as superior flexibility. Development of flexible memory with inorganic silicon materials is based on the design principle that any material, in sufficiently thin form, is flexible and bendable since the bending strain is directly proportional to thickness. This article reviews progress in recent technologies for flexible memory and flexible electronics with inorganic silicon materials, including transfer printing technology, wavy or serpentine interconnection structure for reducing strain, and wafer thinning technology.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.91-91
• /
• 2012

We aim in synthesizing various functional thin films thinner than ~ 10 nm for environmental applications and photovoltaic devices. Atomic layer deposition is used for synthesizing inorganic thin films with a precise control of the film thickness. Several examples about application of our thin films for removing volatile organic compounds (VOC) will be highlighted, which are summarized in the below. 1) $TiO_2$ thin films prepared by ALD at low temperature ($<100^{\circ}C$) show high adsorption capacity for toluene. In combination with nanostructured templates, $TiO_2$ thin films can be used as building-block of high-performing VOC filter. 2) $TiO_2$ thin films on carbon fibers and nanodiamonds annealed at high temperatures are active for photocatalytic oxidation of VOCs, i.e. photocatalytic filter can be created by atomic layer deposition. 3) NiO can catalyze oxidation of toluene to $CO_2$ and $H_2O$ at $<300^{\circ}C$. $TiO_2$ thin films on NiO can reduce poisoning of NiO surfaces by reaction intermediates below $200^{\circ}C$. We also fabricated inverted organic solar cell based on ZnO electron collecting layers on ITO. $TiO_2$ thin films with a mean diameter less than 3 nm on ZnO can enhance photovoltaic performance by reducing electron-hole recombination on ZnO surfaces.

• Polymer(Korea)
• /
• v.33 no.3
• /
• pp.191-197
• /
• 2009

We have investigated the effect of strong p-type organic semiconductor $F_4$-TCNQ-doped CuPc hole transport layer on the performance of p-i-n type bulk heterojunction photovoltaic device with ITO/PEDOT:PSS/CuPc: $F_4$-TCNQ(5 wt%)/CuPc:C60(blending ratio l:l)/C60/BCP/LiF/Al, architecture fabricated via vacuum deposition process, and have evaluated the J-V characteristics, short-circuit current ($J_{sc}$), open-circuit voltage($V_{oc}$), fill factor(FF), and power conversion efficiency(${\eta}_e$) of the device. By doping $F_4$-TCNQ into CuPc hole transport layer, increased absorption intensity in absorption spectra, uniform dispersion of organic molecules in the layer, surface uniformity of the layer, and enhanced injection currents improved the current photovoltaic device with power conversion efficiency(${\eta}_e$) of 0.16%, which is still low value compared to silicone solar cell indicating that many efforts should be made to improve organic photovoltaic devices.

• Electrical & Electronic Materials
• /
• v.9 no.2
• /
• pp.204-207
• /
• 1996

태양의 광에너지를 전기에너지로 변환하는 태양전지의 재료는 현재 무기반도체가 주를 이루고 있지만 최근 유기반도체가 재료자체 물성의 연구진전과 더불어 태양전지로서 개발가능성이 논하여 지고 있다. 한편 유기반도체의 장점은 1)박막으로 제작이 용이하고 2)대량생산에 의한 저가제조가 가능하며 3)경량화를 할 수 있고 4)그 기능의 다양성을 줄 수 있다는 것이다. 또한 단점은 캐리어 트랩 밀도가 커서 반송자(carrier)의 수명과 이동도가 작고 확산길이도 짧기 때문에 광수집 효율이 매우 낮아 광전변환효율이 낮다는 것이다. 또한 일반적으로 유기반도체는 저항율이 커서 오옴성 접촉이 어렵고 입사광 강도의 증대에 따라 변환효율이 감소하는것도 큰 문제로 되어있다. 따라서 본고에서는 지금까지 유기반도체를 사용한 태양전지의 원리 및 제조기술을 간단히 살펴보고 특성과 연구동향등을 분석하여 앞으로 유기반도체 태양전지의 나아가야할 방향을 찾아보고자 한다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.246-249
• /
• 2007

현재까지 $P3HT:C_{60}-PCBM$계는 고분자 유기 태양전지에서 가장 좋은 효율을 보여주고 있다. 그러나 보다 고효율의 소자 제작을 위해 신재료에 대한 연구들이 활발히 진행되고 있으며, 본 연구에서는 $C_{60}-PCBM$ 대신 $C_{70}-PCBM$을 합성하여 소자를 제작하였다. $C_{70}-PCBM$은 $C_{60}-PCBM$에 비하여 가시광선 영역에서 상대적으로 높은 광흡수율을 보여 주었으며, 이것은 광전류의 향상을 가져왔다. 소자제작의 주요 변수로 $P3HT:C_{70}-PCBM$ 광활성층의 처리 조건, 즉, 용매, 조성비, 열처리 조건, 광활성층의 두께 등을 조절하였는데, buffer층(LiF 층) 등이 도입되지 않은 간단한 제작조건 하에서도 본 $C_{70}-PCBM$는 $C_{60}-PCBM$계에 버금가는 3.5% (AM 1.5G, 100 $mW/cm^{2}$ 조건) 이상의 효율을 나타내었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.678-678
• /
• 2013

은 나노선은 투명 금속전극으로 저온 공정이 가능하고, 플랙서블 기판에 사용 가능하여 다양한 분야의 응용 소재 연구가 진행 중에 있다. 본 연구에서는 전면 전극으로 은 나노선을 스프레이 코팅하고, 알루미늄 도핑된 산화아연(AZO)을 sputter로 증착하였다. 광 경로를 길게 하기 위해 AZO 기판을 수열합성법을 통해 산화아연 나노선을 성장하였다. 은 나노선 전극 기판과 산화아연 나노선이 성장된 기판의 광 투과도를 분석하기 위해 UV-visible을 이용하였으며, FE-SEM, AFM을 이용하여 각 기판의 형상을 분석하였다. 은 나노선은 500 nm 파장영역에서 투과도 86.93%, 면저항 16 ${\Omega}/{\square}$보였다. ITO 기판보다 400~600 nm 영역에서 헤이즈가 증가되는 것을 확인 할 수 있었다. 산화아연 나노선이 성장된 기판을 이용하여 P3HT:PCBM 블랜딩된 유기 태양전지를 제작하여 전기적 특성 및 효율을 평가하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2009.02a
• /
• pp.253-253
• /
• 2009

• Bulletin of the Korean Chemical Society
• /
• v.30 no.1
• /
• pp.114-118
• /
• 2009

A new Zn/O single source precursor, TMEDA-Zn$(eacac)_2$, has been synthesized by using N, N, N’, N’-tetramethylethylendiamine (TMEDA), sodium ethyl-acetoacetate, and $ZnCl_2$. From this organometallic precursor, ZnO thin films have been successfully grown on Si (100) substrates through the metal organic chemical vapor deposition (MOCVD) method at relatively mild conditions in the temperature range of 390~430 ${^{\circ}C}$. The synthesized ZnO films have been found to possess average grain sizes of about 70 nm with an orientation along the c-axis. The precursor and ZnO films are characterized through infrared spectroscopy, nuclear magnetic resonance spectroscopy, EI-FAB-spectroscopy, elemental analyses, thermal analysis, X-ray diffraction, and field emission scanning electron microscopic analyses.