• 대한지리학회지
• /
• 제45권1호
• /
• pp.184-200
• /
• 2010

대동여지전도는 표기된 지명과 "대동여지도"와의 관련성으로 볼 때 1861년대에서 1866년 사이에 제작된 것으로 추정된다. "대동여지전도"는 일부에서의 주장처럼 내용이 조잡하고 오류가 많은 지도가 아니라 오히려 "대동여지도"의 표현기법을 활용하면서도 최신의 정보를 수록하고 있으며 도리(道里)의 표기에서는 19세기의 대표적인 목판본 지도인 "해좌전도"보다 훨씬 뛰어나다. "대동여지도"가 군사 행정적 목적에서 제작된 관부용(官府用)지도라면 "대동여지전도"는 군사 행정적 사항뿐만 아니라 사회 경제적 내용들도 많이 반영된 대중용 지도라 할 수 있다. 아울러 "대동여지전도"에는 당시 사람들이 지니고 있던 산천인식 체계가 잘 반영되어 있는데, 국토를 살아있는 생명체에 비유하는 유기체적 관점이 지도를 관통하고 있다. 또한 산수분합(山水分合)의 원리가 지도상에 잘 구현되어 있으며 도로망과 거리의 표시, 호수(湖水)영향권의 표시 등은 현대지도에 견주어도 손색이 없다.

• 한국환경성돌연변이발암원학회지
• /
• 제16권1호
• /
• pp.13-18
• /
• 1996

One mechanism of free-radical production by ethanol is suggested to be through the intracellular conversion of XDH to XO by increased ratio of NADH to NAD. The major mechanism for physiological compensation of cytosolic NADH/NAD balance is the malate/aspartate shutfie. Therefore, it is important to develop the method to improve the efficiency of malate/aspartate shuttle in ethanol metabolism. In the present study, various amino acids and organic acid involved in the shuttle were tested for their functional efficiency in modulating shuttle in the ethanol-perfused rat liver. The rate of ethanol oxidation in the liver perfused with aspartate alone or aspartate in combination with pyruvate, respectively, was increased by about 10% compared to control liver, but not in the tissues perfused with glummate, cysteine or pyruvate alone. Though glummate, cysteine and pyravate did not affect the ethanol oxidation significanfiy, they showed some suppresive effect on the ethanol-induced radical generation monitored by protein carbonylation analysis. Among the tested components, aspartate is confirmed to be the most efficient as a metabolic regulator for both ethanol oxidation and ethanol-induced oxidative stress in our perfusion system. These effects of aspartate would result from NAD recycling by its supplementation through the coupled aspartate aminotransferase/malate dehydrogenase reactions and the malate-aspartate shuttle.

• 대한지리학회지
• /
• 제40권4호
• /
• pp.402-415
• /
• 2005

본 연구는 조선산업의 구조조정과 지역사회 협력구조 특성에 대하여 고찰하였다. 신현읍은 조선 대기업의 입지로 급격한 사회$\cdot$경제적 변화를 경험하였다. 우리 나라보다 먼저 구조조정을 경험한 일본의 경우, 분업화와 집적화를 통한 조선산업의 입지구조재편과 기업-지방정부-지역주민의 협력관계를 발전시켜 왔다. 우리나라 조선산업 구조조정은 대기업의 경영환경 개선이 핵심이었기 때문에 기업간$\cdot$지역간 집적화나 협력구조가 정착되지 못하였다. 기업과 지역사회의 유기적 협력구조가 대규모 구조조정 이전에 구축된 일본의 경우와는 달리, 우리나라 조선산업도시는 구조조정에 따른 지역사회의 위기의식에서 기업-지역사회 협력구조가 출발하였다. 조선 대기업이 입지한 신현읍 지역은 중핵기업을 중심으로 구축된 생산영역간 연결고리는 회고하지만, 지역사회 협력구조는 미약한 현실이다. 기업, 공공기관, 지역주민, 지역전문가 등이 참여하는 로컬 거버넌스로서의 지역사회 협력구조는 지역사회의 응집력 강화뿐만 아니라, 산업도시가 직면한 문제를 해결할 수 있는 합리적 통로가 될 수 있을 것이다.

• KSBB Journal
• /
• 제30권5호
• /
• pp.245-252
• /
• 2015

The aim of this study was to investigate the efficacy of enhanced physiological activities in cultures isolated from Korean fermented watery Kimchi, Dongchimi, of single lactic acid bacteria (LAB), and when these three are mixed LAB as probiotics. Using the BIOLOG system and 16S rRNA sequencing, the isolates were characterized, and identified and assigned to Leuconostoc mesenteroides DK-3, Leuconostoc dextranicum DK-6, and Lactobacillus curvatus DK-13, respectively. Growth rate and pH changes, production of organic acids as metabolites, and physiological activities of the single and mixed LAB cultures, were monitored and compared. In mixed LAB cultures after 72 h of incubation, the maximum concentrations of lactic acid and acetic acid were approximately 340.5 mM and 191.9 mM, respectively, and pH changed from 7.00 to 3.62. Mixed LAB cultures were able to eliminate 96.3% of nitrite. Activities of antioxidant and ${\beta}$-galactosidase were 60.3% and 16.8 units/mg, respectively. Significant antibacterial activity of the concentrated supernatants was demonstrated against several food-poisoning bacteria. Physiological activities obtained from the mixed LAB cultures have been shown to be considerably higher than those of single LAB cultures. In conclusion, these studies demonstrate that compared to the single cultures, all physiological activities in mixed LAB cultures are significantly enhanced.

• 한국응용과학기술학회지
• /
• 제17권4호
• /
• pp.213-225
• /
• 2000

Sophorolipids were biosynthesized using a strain of yeast, Torulopsis bombicola ATCC22214. It has been reported that this yeast gives the highest yields for the production of biosurfactant sophorolipids. Hence, this yeast was used in this study. One of the objectives of this study is to increase the yield of the sophorolipid synthesis. To meet this end, basic culture medium was formulated on the basis of literature research to-date. When this medium was used, the increase in yield from 15% to 150% was observed compared to using the media in the literature. To examine how the interfacial characteristics of sophorolipids change with substrate, glucose (the first carbon source) was maintained in the media and after being cultured for three days, the second carbon sources such as alkanes, vegetable oils, alcohols or organic acids were added. The whole broth was extracted twice with ethyl acetate and the extract was analyzed by thin layer chromatograhy(TLC). After qualitative analyses by TLC, surface tensions of sophorolipids were measured by the Wilhelmy plate method and critical micelle concentration(CMC) was determined using these surface tension data. Also, interfacial tensions were measured by the spinning drop method and emulsions of the three-component water/decane/sophorolipid system were tested. Sophorolipids were effective and efficient in terms of surface tension reduction and CMC, but they were ineffective as emulsifiers because emulsions were separated within 30 minutes.

• 상하수도학회지
• /
• 제22권6호
• /
• pp.641-646
• /
• 2008

In this research, recovery of high quality organics from excess activated sludge and its potential as a external carbon sources for BNR process was studied. By simultaneous treatment of alkali and ozone, TSS concentration was reduced by 32%, and RBDCOD fraction was increased by 76.2%, and major constitute of produced organic were acetic acid and propionic acid. Also, nitrogen and phosphorus were greatly solubilized. However, because acid-hydrolyzable phosphorus(AHP) was major part of solubilized phosphorus, $NH_4{^+}-N$ and $PO_4{^3}-P$ concentration were insufficient for effective formation of crystal like as MAP(Magnesium Ammonium Phosphate) and hydroxyapatite. By placing BPR reactor before alkali-ozone treatment reactor, $PO_4{^3}-P$ concentration in pretreated sludge was increased by 1.8 times, and improved potential of phosphorus recovery by crystallization. In experiment of crystallization, hydroxyapatite formation was more easily applied than MAP. By hydroxyapatite formation, $SCOD/PO_4-P$ ratio was greatly increased from 32.7 at control to 141.9 at $Ca^{2+}/PO{_4}^{3-}-P$ mole ratio of 2.4. The results based on this study indicated that the proposed system configuration has potential to reduce the excess sludge production, to recover phosphorus in usable forms as well as utilize organics as a external carbon source in BNR process.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.53-53
• /
• 2011

As the dimension of Cu interconnects has continued to reduce, its resistivity is expected to increase at the nanoscale due to increased surface and grain boundary scattering of electrons. To suppress increase of the resistivity in nanoscale interconnects, alloying Cu with other metal elements such as Al, Mn, and Ag is being considered to increase the mean free path of the drifting electrons. The formation of Al alloy with a slight amount of Cu broadly studied in the past. The study of Cu alloy including a very small Al fraction, by contrast, recently began. The formation of Cu-Al alloy is limited in wet chemical bath and was mainly conducted for fundamental studies by sputtering or evaporation system. However, these deposition methods have a limitation in production environment due to poor step coverage in nanoscale Cu metallization. In this work, gap-filling of Cu-Al alloy was conducted by cyclic MOCVD (metal organic chemical vapor deposition), followed by thermal annealing for alloying, which prevented an unwanted chemical reaction between Cu and Al precursors. To achieve filling the Cu-Al alloy into sub-100nm trench without overhang and void formation, furthermore, hydrogen plasma pretreatment of the trench pattern with Ru barrier layer was conducted in order to suppress of Cu nucleation and growth near the entrance area of the nano-scale trench by minimizing adsorption of metal precursors. As a result, superconformal gap-fill of Cu-Al alloy could be achieved successfully in the high aspect ration nanoscale trenches. Examined morphology, microstructure, chemical composition, and electrical properties of superfilled Cu-Al alloy will be discussed in detail.

• 한국산업보건학회지
• /
• 제29권1호
• /
• pp.27-33
• /
• 2019

Objective: This study analyzed the status of the application of trade secrets in MSDSs according to size and type of industry. The contents of the MSDS non-public approval policy are summarized. We suggest proactive improvement requirements related to the operation of the MSDS non-public approval policy. Methods: To review this subject, we selected 153 manufacturers and six importers in such fields as organic chemical production. The trade secrets application status and ratio (%) of MSDSs by industry size and industry classification were investigated. Improvements toward a proactive system related to the operation of the MSDS non-public approval policy under the Occupational Safety and Health Act(OSHA) were summarized. Results and Conclusions: According to the results, the trade secret ratio in MSDSs by industry size was 33% in workplaces with less than 50 employees, 23.1% in workplaces with more than 50 but less than 100 workers, 73% in workplaces with more than 100 workers, and 83.4% in workplaces with 300 or more workers. For the trade secret writing rate for MSDSs by industry, the highest was MOCCP (Manufacture of ink, paint, coating and similar products) at 80.9%. MOC (Manufacture of other chemicals) was the lowest at 16.2%. We propose four proactive efforts to minimize the administrative burden of implementation of the MSDS non-public approval policy. The results of this study can be used as basic data for policy improvements to make more effective use of MSDS.

• 농촌계획
• /
• 제29권3호
• /
• pp.79-89
• /
• 2023

As the demand for environmental-friendly agricultural products continues to rise due to increased concerns regarding food safety and ecosystem conservation, it is becoming important to identify regions and spatial locations where environmental-friendly should be intensively established for production integration. This study aims to analyze the spatial distribution of environmental-friendly certified farms in Jeollanam-do, South Korea. Spatial statistical analysis based on Local Moran's I and Getis-Ord Gi^* were used to identify spatial cluster characteristics and landscape indices were utilized to analyze spatial patterns of environmental-friendly certified farms. The results indicated that Haenam-gun, Gangjin-gun, Muan-gun, and Jindo-gun were identified as hotspots, while Muan-gun, Goheung-gun, and Jindo-gun exhibited high connectivity. This suggests that environmental-friendly certified farms in Muan-gun and Jindo-gun were clustered and closely connected to one another. Based on the results of the spatial distribution of environmental-friendly certified farms, areas belonging to the hotspot and with high connectivity should be managed as clustered districts to secure the foundation and system of environmental-friendly certified farms. Areas that belong to cold spots and have low connectivity should be preceded by measures to promote conversion to environmental-friendly agriculture. In addition, it is necessary to make it possible to create a large-scale cluster district through a long-term spatial planning strategy to expand the environmental-friendly certified farms. The findings of this study can provide quantitative data on policies and discussions for developing a model for rural spatial planning.

• Membrane and Water Treatment
• /
• 제15권2호
• /
• pp.59-66
• /
• 2024

This study evaluated the performance of a membrane aerated biofilm reactor (MABR) for nitrogen removal from a high-strength ammonia nitrogen-containing wastewater. The experimental setup consisted of four compartments that are sequentially anaerobic and aerobic to achieve complete nitrogen removal. The last compartment of the reactor setup contained a membrane bioreactor (MBR) to reduce sludge production in the system and to obtain a better-quality effluent. Continuous experiment over a period of 47 days showed that MABR exhibited excellent NH₄⁺-N removal efficiency (99.5%) compared to the control setup without MABR (56.5%). The final effluent NH₄⁺-N concentration obtained in the MABR was 2.99±1.56 mg/L. In contrast to NH₄⁺-N removal, comparable TOC removal values in the MABR and the control reactor (99.2% and 99.3%, respectively) showed that air supply through MABR is much more critical for denitrification than for organic removal. Further study to understand the effect of air supply rate and holding pressure on NH₄⁺-N removal in MABR revealed that an increase in both these parameters positively impacted reactor performance. These parameters are related to oxygen supply to the biofilm formed over the membrane surface, which in turn influenced NH₄⁺-N removal in MABR. Among the two different strategies to control biofilm over the membrane surface, results showed that scouring for a duration of 10 min on a weekly basis, along with mixing air supply, could be an effective method.