• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.57 no.2
• /
• pp.140-145
• /
• 2008

The purpose of this paper is to discuss the fabrication of $\beta$-PVDF($\beta$-Polyvinylidene fluoride, ${\beta}-PVF_2$) organic thin films using the vapor deposition method. Vapor deposition was performed under the following conditions: the temperature of evaporator, the applied electric field, and the pressure of reaction chamber were $270^{\circ}C$, 142.4 kV/cm, and $2.0{\times}10^{-5}\;Torr$, respectively. The molecular structure of the evaporated organic thin films were evaluated by a FT-IR. The results showed that the characteristic absorption peaks of $\beta$-form crystal increase from 72% to 95.5% with an increase in the substrate temperature. In the analysis of the electric characteristics, the abnormal increases in the relative dielectric constant and the dielectric loss factor in the regions of low frequency and high temperature are known to be caused by inclusion of impurity carriers in the PVDF organic thin films. In order to analyze quantitatively the abnormalities in the conductivity mechanism caused by ionic impurities, the product of the ion density and the mobility that affect the electrical property in polymeric insulators is analyzed. In the case of a specimen produced by varying the substrate temperature from $30^{\circ}C$ to $105^{\circ}C$, the product of mobility and the ion density decreased from $4.626{\times}10^8$ to $8.47{\times}10^7/V{\cdot}cm{\cdot}s$. This result suggests that the higher the substrate temperature is maintained, the better excluded the impurities are, and the more electrically stable material can be obtained.

• Korean Institute of Interior Design Journal
• /
• v.19 no.6
• /
• pp.47-58
• /
• 2010

Frank Lloyd Wright(1867-1959) was regarded as the pioneer of the modern architecture in the beginning and transition period of 20th century. His works have the pure shape form which have the deep relationship with the organic architecture. Wright told himself that the Froebel System had an influence on his works a lot. This study have researched about the three dimensional application of the Froebel System in his works with assembling and disassembling. Also the two dimensional application in the diagonal and circular plans are the one of the subjects here. The following conclusions are reached. First, The similar of the Wright's works and the Froebel System was the application of the similar principles rather than the copy of the method, which are the accent of the center, the composition of the part and whole, the understanding of the composition principle through the unit system and the unfolding of the crystal by rotation. Even thought the Wright's works have the triangle, square, hexagonal shape, the way of the expansion from the centered space was same. Also the space formed by the division of the center space, unfolds making the part and whole by overlap and continuation. The 2nd Froebel make space decided by the Net and Crystal Lattices which have the crystal characteristics by the rotation. The new geometric architecture, pinwheel, was created by this method. The application of the Froebel in the Wright's works have the several sets which are the 3th, 4th, 5th, 6th Froebels, 2nd, 7th Froebels and the 3th, 5th, 9th Froebels. The geometrical analysis of the square shape and the diagonal shape of the Wright's works was possible. The unfolding of the centered space can be found in the Guggenheim Museum using the analysis of the circular geometric of the 9th Froebel. The above study proves that the Froebel was not a mere tool for the basic shape training but also the main body of Wright's works which consists of the organic idea and philosophy of the space.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.21 no.1
• /
• pp.69-75
• /
• 2013

This study is a fundamental research to test the applicability of powdered MSWI(Municipal Solid Waste Incinerator) ash melted slag as a seed Crystal for crystallization reaction. Powdered ash melted slag was melted at $1100^{\circ}C$ and ground to lesser than 0.35mm. According to the result of the tests, calcium, enough for crystallization reaction, was eluted from powdered ash melted slag. Moreover, sample(Phosphorus concentration is under 10 mg/L), more than 90% of Phosphorus can be removed. So we rectify the Phosphorus concentration to 100 mg/L. Alkalinity, being well known that it interferes crystallization reaction, effect was studied for synthetic solution(100 mg/L initial Phosphorus concentration, 50 mg/L calcium, pH 8, 1% powdered ash melted slag dosage). For this result, we know that Phosphorus removal is hindered by alkalinity. In addition, the effect of reaction temperature was performed at the same method. The reaction velocity was increased through raising the reaction temperature.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.19 no.1
• /
• pp.1-5
• /
• 2009

In this study, we performed growth of InGaN/GaN multi quantum well (MQW) structures on semi-polar (1-10]) GaN facet on 8-degree off oriented stripe patterned (100) Si substratcs by MOVPE. The structural and optical properties of the InGaN/GaN multi quantum well (MQW) structures grown on (1-101) GaN stripe depend on $NH_3$ flow rate, TMI flow rate and growth temperature are characterized by cathodoluminescence (CL) and scanning electron microscopy (SEM). With the decrease of $NH_3$ flow rate, the threading dislocation of (1-101) GaN is considerably reduced. We could control the transition wavelength of InGaN/GaN MQW structures from 391.5 nm to 541.2 nm depend on the growth conditions.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.1
• /
• pp.31-36
• /
• 2013

Acetylated Cellulose Ether (ACE), cellulose-based amphiphilic polymer with hydrophilic and hydrophobic, was synthesized and investigated in terms of its solubility and wettability for organic solvents and water. Acetyl group was substituted to the cellulose ether in a hydrophilic polymer by esterification. As a result of FT-IR, the peak corresponding to the hydroxyl group decreased and carboxyl acid peak increased with increasing reaction time and temperature, which signified the increase in the degree of acetylation of the ACE. There were similar thermal decomposition behaviors before and after esterification reaction until $800^{\circ}C$ so that the reaction occurred without significant structural changes of cellulose backbones. The solubility parameter of the ACE had a range of 18.5~26.4, and its viscosity and turbidity were controlled according to the solubility parameter of organic solvents. The ACE showed the hydrophilicity because the contact angle of the ACE was higher than the cellulose ether. These results confirmed that the ACE had the hydrophobicity and hydrophilicity due to the ether which was glucosidic bonding between the glucose units and un-reacted hydroxyl functional groups in the ACE.

• Journal of Technologic Dentistry
• /
• v.29 no.1
• /
• pp.121-131
• /
• 2007

A preparation process's conditions of aqueous sol which contains anatase-type nano titania particles with photocatalyic properties was established by using Yoldas process, so called, DCS(Destabilization of Colloidal Solution) process in this study. And crystal size change and phase transformation of titania particles in aqueous titania sol depending on reaction conditions was investigated by a light scattering method and XRD analysis of frozen dried powders, respectively. This sol with photo catalytic nano titania particles was used to the following hydrophilic hybrid coating film's fabrication and its properties was evaluated. Subsequently, for coating film using the above mentioned aqueous titania sol, non-aqueous titania sol was prepared without any chemical additives and its time stability according to aging time was investigate. By using the above mentioned aqueous titania sol and non-aqueous sol, a complex oxide coating sol for metal and ceramic substrate and a organic-inorganic hybrid coating sol for polymer substrate was prepared and it's hydrophilicity depending on UV irradiation conditions was evaluated. As a conclusions, the following results were obtained. (1)Aqueous titania sol The average particle size of titania in formed aqueous titania sol was distributed between 20$\sim$90nm range depending on reaction conditions. And the crystal phase of titania powders obtained by frozen drying method was changed from amorphous state to anatase and subsequently transformed to rutile crystal phase and it is attributed to concentration gradient in aqueous sol. (2)Non-aqueous titania sol Non-aqueous titania sol was prepared using methanol as a solvent and a little distilled water for hydrolysis and nitric acid as a catalyst were used. The obtained non-aqueous titania sol was stable at room temperature for 20 days. Additionally, non-aqueous titania sol with addition of chealating reagent such as acethylaceton and ethylene glycol prolonged the stability of sol by six months. (3)Complex sol and hybrid sol with super hydrophilicity The above mentioned aqueous titania sol as a main photocataylic component and non-aqueous titania sol as a binder for coating process was used to prepare a complex sol used for metal, ceramic and wood material substrate and also to prepare the organic-inorganic hybrid sol for polymer substrate such as polycarbonate and polyethylene, in which process APMS(3-Aminopropyltrimethoxysilane), GPTS(3-Glycidoxypropyl-trimethoxysilane) as a hydrophilic silane compound and HEMA(2-Hydroxyethyl methacrylate) as a forming network in hybrid coating film were used. The hybrid coating film such as prepared through this process showed a superhydrophilicity below 1$10^{\circ}$ depending on processing conditions and a pencil's hardness over 6 H.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.9
• /
• pp.2917-2924
• /
• 2012

Four novel metal-organic complexes $[Cd_2(IP)_2(TBZ)_2(H_2O)_2]{\cdot}(H_2O)$ (1), $[Zn_4(IP)_4(TBZ)_4]{\cdot}2(H_2O)$ (2), $[Zn_2(BTC)(TBZ)_2(CO_2H)]$ (3), [Co(PDC)(TBZ)] (4) (where IP = isophthalate; TBZ = thiabendazole; BTC = 1,3,5-benzenetricarboxylate; PDC = pyridine-3,4-dicarboxylate) have been prepared and characterized by IR spectrum, elemental analysis, thermogravimetric analysis, and single-crystal X-ray diffraction. X-ray structure analysis reveals that 1, 2, and 3 are one-dimensional chain polymers, while 4 is a two-dimensional network polymer. The TBZ acts as a typical chelating ligand coordinated to the metal center in all complexes. The 1D chain architecture of 1 is constructed from isophthalates and cadmium atoms. A simultaneous presence of chelating, monodentate and bidentate coordination modes of IP ligands is observed in complex 2. In complex 3, the 16-membered rings are alternately arranged forming an infinite 1D double-chain structure. The 2D skeleton of 4 is formed by cobalt ions as nodes and PDC dianions as spacers, through coordination bonds. The hydrogen bonds and ${\pi}-{\pi}$ stacking play important roles in affecting the final structure where complexes 1 and 3 have 2D supramolecular networks, while complexes 2 and 4 have 3D supramolecular architectures.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.1 no.1
• /
• pp.59-70
• /
• 1991

ZnO fine powder was prepared by the batch precipitation process using $ZnCl_2$ and hexamethylenetetramine solution as a mother solution. When the concentrations of $ZnCl_2$solution were $0.1mol/\ell$ and 0.05mol/-, the particles of rod shape were obtained when the conentration of $ZnCl_2$solution was $0.01mol/\ell$, the particle of plate shape was obtained. When the hexamethylenetetramine as a precipitants was used, pH was raised slow during a few minute be-cause of slow hydrolysis rate of hexamethylenetetramine. For rapid raising of pH during initial reac-tion time, $NH_4$OH was added as nucleant. When $NH_4$OH as a nucleant was added, obtained particle was shape of granular and the mean particle size was $0.41\mu\textrm{m}$. After calcination at $500^{\circ}C$ during 1hour, all of remained organic phase was removed but the shape of particles was not changed. But pa-rticles were slightly shrunk in comparision with before calcined particles.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.18 no.5
• /
• pp.205-210
• /
• 2008

Pearl is the organic gemstone which does not come from mines but from the biomineralization inside mollusc. Mollusc with nacre on inner surface of the shell is inevitable to make pearl. In this paper we researched and analyzed the pearls cultured using Pen shell (Atrina pectinata) which is not used in pearl farming industry but has potential to make pearls because it has thick and beautiful nacre inside the shell. SEM analysis was conducted to reveal the pattern of nacre on the Atrina pectinata pearl. Specific characteristics as sea-water pearl are detected by further analysis with ED-XRF. Aragonite specific peaks such as $1083cm^{-1}$ and $705cm^{-1}$ were shown by Raman analysis. UV-Vis analysis of Atrina pectinata pearl showed different pattern of spectrum compared with Pinctada margaritifera pearl. The reason for this discrepancy is assumed by the metabolic difference of each species.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.25 no.6
• /
• pp.239-244
• /
• 2015

Lead zirconate titanate (PZT) thick films with thickness of $10{\sim}20{\mu}m$ were fabricated on silicon substrate by aerosol deposition method. As-deposited films on silicon were annealed at the temperatures of $700^{\circ}C$. The electrical properties of films deposited by PZT powders were characterized using impedance analyzer and Sawyer-Tower circuit. The PZT powder was prepared by both conventional solid reaction process and sol-gel process. The remanent polarization, coercive field, and dielectric constant of the $10{\mu}m$ thick film with solid reaction process were $20{\mu}C/cm^2$, 30 kV/cm and 1320, respectively. On the other hand, the PZT films by sol-gel process showed a poor dielectric constant of 635. The reason was probably due to the presence of pores produced from organic residue during annealing.