• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 Techno-Fair 및 합동춘계학술대회 논문집 전기물성,응용부문
• /
• pp.167-168
• /
• 2008

Organic light emitting diodes (OLEDs) show a lot of advantages for display purposes. Because OLEDs provide white light emission with a high efficiency and stability, it is desirable to apply OLEDs as an illumination light source and back light in LCD displays. We synthesized new emissive materials, namely $Zn(HPB)_2$ and Zn(HPB)q, which have a low molecular compound and thermal stability. We studied white OLEDs using $Zn(HPB)_2$ and $Zn(PQ)_2$. The fundamental structures of the white OLEDs were ITO / NPB (40 nm) / $Zn(HPB)_2$ (40 nm) / $Zn(PQ)_2$ (20 nm) / LiAl (120 nm). As a result, we obtained a maximum luminance of $4200cd/m^2$ at a current density of $440mA/cm^2$. The CIE (Commission International de l'Eclairage) coordinates are (0.319, 0.338) at an applied voltage of 10 V.

• 공업화학
• /
• 제16권1호
• /
• pp.131-138
• /
• 2005

활성탄과 제올라이트 13X에 대한 벤젠의 정적흡착실험으로부터 Freundlich isotherm과 Toth isotherm을 구하였으며 똑같은 흡착제로 충진된 흡착탑을 이용하여 벤젠의 파과곡선을 측정하였다. 파과시간과 벤젠 분압의 관계를 해석하여 Freundlich isotherm의 파라미터를 결정하였다. 파과실험 결과의 해석으로부터 예측되는 벤젠의 흡착량이 정적 실험 결과로부터 예측되는 것과 비교적 잘 일치하였다. 활성탄에 대한 동적 실험 결과에서 좀 더 대칭형태에 가까운 파과곡선이 얻어져서 제올라이트 13X에 비해 더 적은 오차가 나타났다.

• Advances in environmental research
• /
• 제3권1호
• /
• pp.29-43
• /
• 2014

Pharmaceutical wastewater effluents are well known for their difficult elimination by traditional biotreatment methods and their important contribution to environmental pollution due to its fluctuating and recalcitrant nature. OTC is one of the nonbiodegradable antibiotics that makes antibiotic-resistant, so it can make be high risk for environment. NZVI can be a good choice for removal of OTC in aqueous solution. Response surface methodology (RSM) was used to optimize the amounts of NZVI and OTC to be used at pH 3 and under 200 W, UV-A irradiation. The responses were removal percent of absorption at 290 and 348 nm, TOC and COD of OTC. In the optimum condition, Linear model was performed 155 ppm of OTC were removed by 1000 ppm NZVI after 6.5 hours and the removal efficiency of absorption at 290 and 348 nm, TOC and COD were 87, 95, 85 and 89 percent, respectively. In the similar process, there is no organic compound after 14 hours. The parameters ORP, DO and pH were investigated for 6:30 hours to study the type of NZVI reaction in process. In the beginning of reaction, oxidation was the dominant reaction after 3 hours, photocatalytic reaction was remarkable. The mechanism of OTC degradation is proposed by HPLC/ESI-MS and four by products were found. Also the rate constants (first order kinetic chain reaction model) were 0.0099, 0.0021, 0.0010, 0.0049 and $0.0074min^{-1}$, respectively.

• 한국대기환경학회지
• /
• 제29권6호
• /
• pp.713-721
• /
• 2013

This study is about emission characteristics of HAPs and particulate matters emitted by spray of paint and organic solvent usually used in vehicle paint facilities. To analyze emission characteristics of HAPs and particulate matters emitted from vehicle paint facilities are calculated based on the measuring emission quantity of pollutants based on the amount of paint used (kg) and unit area ($m^2$) by paint manufacturers (J company, K company, and R company). In cases of paint manufacturers (J, K, and R), average emission factors of VOCs, carbonyl compound, particulate matter, and PAHs per 1 kg of paint were 327.81 g/kg, 5.98 g/kg, 336.70 g/kg, and 0.0078 g/kg respectively. The average emission factors of VOCs, carbonyl compounds, particulate matters, and PAHs by unit area were $171.55g/m^2$, $3.10g/m^2$, $176.27g/m^2$, and $0.0036g/m^2$ respectively.

• 한국응용과학기술학회지
• /
• 제34권3호
• /
• pp.562-567
• /
• 2017

The organic light-emitting diodes are fabricated with six anthracene derivatives containing simple substituents such as phenyl or naphthyl group. The device structure is as in the following: Indium tin oxide (ITO) (180 nm)/4,4-4,4',4"-tris[N-(1-naphthyl)-N-phenylamino]triphenylamine (2-TNATA) (30 nm)/4,4'-bis[N-(1-naphthyl)-N-phenyl-1-amino] biphenyl (NPB) (20 nm)/Emitting compound (30 nm)/2,2',2"-(1,3,5-Benzinetriyl)-tris (1-phenyl-1-H-benz-imidazole) TPBi (40 nm)/lithium quinolate (Liq) (2 nm)/Al (100 nm). In the emitting layer the anthracene derivatives are used without any dopant. All the six devices show blue emissions. Among the tested diodes, the one with 9-(2-naphthyl)-10-(p-tolyl) anthracene (2-NTA) exhibited luminous efficiency, power and external quantum efficiencies of 3.26 cd/A, 0.98 lm/A, 2.8 % at $20mA/cm^2$.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2004년도 추계 종합학술대회 논문집
• /
• pp.554-557
• /
• 2004

수면 위의 지질 단분자는 박막 모델로서 많은 관심을 끌고 있으며, 많은 기술적인 응용법에 의해 다층의 박막 시스템을 연구하고 있다. 아조벤젠 혼합물인 아조벤젠 덴드리머의 단분자막에서 광이성화는 흡수스펙트럼과 멕스웰 변위전류법(MDC)에 의해 관찰할 수 있다. 덴드리머는 나뭇가지 모양을 닮은 고분자이며, 흡수스펙트럼에 의해 trans-to-cis 변환을 평가할 수 있다. 본 연구에서는 덴드리머의 광이성화특성에 관하여 연구하였다.

• Journal of Pharmaceutical Investigation
• /
• 제5권3호
• /
• pp.50-57
• /
• 1975

Bismuthsubgallate is a compound of indefinite composition containing bismuth and gallic acid. Because its structure was indefinite, many papers have been reported for it. But these are different one another and the relationship between the physical properties, structure and manufacturing condition has not been yet reported. In this experiment, bismuthsubgallate was prepared from bismuthsubgallate and gallic acid in an acetic medium at $65^{\circ}$, and dried at four different temperatures $30^{\circ}\;65^{\circ}\;105^{\circ}\;and\;155^{\circ}$. And some of the other relative bismuth organic compounds were prepared. To each product. elemental analysis, IR spectra and DTA, TGA curves were determined. These results revealed the followings; l. The structure of bismuthsubgallate is comfirmed as a complex form of gallomonohydroxo-bismutic acid monohydrate and its yellow colour dependent upon complex anion in the structure. 2. According to the drying temperature, the hydrate content of bismuthsubgallate is quite different: dihydrate at room temperature, mono-hydrate at. $65^{\circ}$, anhydrous at $105^{\circ}$ and decomposed partial1y oganic substance of the structure above $155^{\circ}$.

• Environmental Engineering Research
• /
• 제25권2호
• /
• pp.186-196
• /
• 2020

Pillared clays with Zr and Fe/Cu/Zr polycations have been prepared from natural clays found in large deposits of Kazakhstan and assessed as catalysts for the catalytic wet peroxide oxidation (CWPO), using 4-nitrophenol (4-NP) as model compound. The performance of the catalysts was followed by measuring the concentration of 4-NP, H₂O₂ and the total organic carbon (TOC), considering C_4-NP = 5 g L^-1, $C_{H_2O_2}$ = 17.8 g L^-1, C_cat = 2.5 g L^-1, initial pH = 3.0 and T = 50℃. At those selected conditions, the pillared clays showed higher activity than natural clays in the CWPO of 4-NP. The conversion of the model pollutant was complete when Fe/Cu/Zr-PILCs were used, with the TOC removal reaching 78.4% after 24 h with the best Fe/Cu/Zr-PILC. The H₂O₂, 4-NP and TOC time-evolution was well described by a kinetic model based on TOC lumps in three blocks, considering the initial TOC (corresponding to 4-NP), the production of oxidizable intermediates and the formation of refractory products.

• 한국안전학회지
• /
• 제25권1호
• /
• pp.32-37
• /
• 2010

When back-out & firing Process applies heat, hume is piled up in exhaust duct by organic compound and it have high dangerousness. There by, the process is happening a lot of damage that is exhaust duct fire. However we do not have certain fire dangerousness estimation and digestion countermeasure. So we need preventive measure. Back-out & firing is a process which has fine structure, electrical and mechanical characteristics, such as firing kiln and back-out kiln which has pipe line and box type. The box oven is made of heating coil, fan motor and control panel. Back-out & firing process has air circulation institution of quick ventilation type. When we operate this process for long time, fire can break out easily. Duct is made by zinc shredder. If fire breaks out in duct inside, fire by deposit fume can be dispersed easily. Accordinglym, This project estimate danger for back-out & firing process exhaust duct through real fire test. And there is purpose of study to establish preventive measure.

• 설비공학논문집
• /
• 제13권7호
• /
• pp.637-646
• /
• 2001

VOC(Volatile Organic Compound) removal characteristics in continuous flow reactors have been numerically investigated. The photocatalytic reaction have been simulated with the binding constant and the reaction rate constant obtained from experimental data for the constant-volume batch reactor, and then VOC abatement in continuous flow reactors with the same conditions as those of batch reactor has been analyzed. The standard 4\kappa-\varepsilon$ model and mass conservation equation have been employed for numerical calculation, and heterogeneous reaction rate has been used in terms of the boundary condition of the conservation equation. in the case of the continuous flow reactor, reaction characteristics have been estimated with various inlet velocities and with different number of baffles. The result shows that the concentration distribution and flow patterns are strongly affected by the inlet velocity, and that with the increased inlet velocity, VOC removal rate is increased, while removal efficiency is decreased. This result may be useful in the design of reactors with improved VOC removal efficiency.