• Bulletin of the Korean Chemical Society
• /
• v.25 no.10
• /
• pp.1508-1512
• /
• 2004

A gas chromatography/mass spectrometric (GC/MS) method has been developed for the determination of trace mono-n-butyltin (MBT), di-n-butyltin (DBT), and tri-n-butyltin (TBT) compounds in sediments. Samples were extracted by 10% acetic acid in methanol containing 0.03% tropolone and were then derivatized for GC/MS analysis. Ethylation by sodium tetraethylborate and phenylation by sodium tetraphenylborate were evaluated as a derivatization reaction of the organotins in sample extract. n-Hexane was added into reaction media in the beginning of the reaction for the continuous extraction of derivatized organotins. Ethylation requires less than 2 hours to get proper derivatization yields for MBT, DBT, and TBT altogether and produces relatively low amounts of side reaction products. Compared to ethylation, phenylation requires much longer time but provides relatively lower yield and produces considerable amounts of side reaction products. Therefore, the ethylation reaction was applied for the analysis of organotin compounds in sediment. An isotope dilution mass spectrometric (IDMS) method based on GC/MS has been applied to the accurate determination of DBT compounds in the sediments. The IDMS results from the analyses of sediment samples showed a reasonable repeatability and a good agreement with the values obtained by IDMS based on liquid chromatography/induced coupled plasma/mass spectrometry.

• Journal of Korean Society on Water Environment
• /
• v.23 no.2
• /
• pp.193-200
• /
• 2007

The AOPs research defined by creating a sufficient amount of OH radicals from the dissolution of organic materials through photoxidation and research for a complete elimination of residual organic materials by membrane are actively ongoing. This research focuses on the hybrid processing of AOPs and M/F membrane to dissolve and eliminate organic chemicals in drinking water which are suspected of carcinogens. For this purpose, underground water was used as a source of drinking water for the hybrid processing of AOPs oxidation and M/F membrane, and a pilot plant test device was installed indoor. Carcinogenic chemicals of VOCs and pesticide were artificially mixed with the drinking water, which was then diluted close to natural water in order to examine treatment efficiency and draw optimal operation conditions. The samples used for this experiment include four chemicals phenol, chloroform, in VOCs and parathion, carbaryl in pesticide. As a result of the experiments conducted with simple, and compound solutions, the conditions to sufficiently dissolve and eliminate carcinogenic chemicals from the hybrid processing of where carcinogens were artificially added are : (hydrogen peroxide) prescribed solution 100 mg/L under pH 5.5~6.0, and the temperature $12{\sim}16^{\circ}C$, at the normal temperature and pressure. $d-O_3$ volume of 5.0 ppm and above and 30-40 minutes of reaction time are most appropriate and using MF/UF for membrane was ideal.

• Safety and Health at Work
• /
• v.14 no.2
• /
• pp.215-221
• /
• 2023

Background: There is little information about the airborne hazardous agents released during the heat treatment when manufacturing a welding material. This study aimed to evaluate the airborne hazardous agents generated at welding material manufacturing sites through area sampling. Methods: concentration of airborne particles was measured using a scanning mobility particle sizer and optical particle sizer. Total suspended particles (TSP) and respirable dust samples were collected on polyvinyl chloride filters and weighed to measure the mass concentrations. Volatile organic compounds and heavy metals were analyzed using a gas chromatography mass spectrometer and inductively coupled plasma mass spectrometer, respectively. Results: The average mass concentration of TSP was 683.1±677.4 ㎍/m³, with respirable dust accounting for 38.6% of the TSP. The average concentration of the airborne particles less than 10 ㎛ in diameter was 11.2-22.8×10⁴ particles/cm³, and the average number of the particles with a diameter of 10-100 nm was approximately 78-86% of the total measured particles (<10 ㎛). In the case of volatile organic compounds, the heat treatment process concentration was significantly higher (p < 0.05) during combustion than during cooling. The airborne heavy metal concentrations differed depending on the materials used for heat treatment. The content of heavy metals in the airborne particles was approximately 32.6%. Conclusions: Nanoparticle exposure increased as the number of particles in the air around the heat treatment process increases, and the ratio of heavy metals in dust generated after the heat treatment process is high, which may adversely affect workers' health.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.24 no.4
• /
• pp.85-94
• /
• 2016

The purpose of this study was to characterize the coffee ground and its possibility to develop the antifungal activity. pH, EC, and Zn contents of the coffee ground from coffee shops were higher than those of commercial coffee ground, but there was no significant difference in $K_2O$, CaO, MgO, $Na_2O$, Mn contents. The antimicrobial activity of the water soluble extracts from the coffee shop and the commercial coffee ground were tested for six major plant pathogens, Rhizoctonia solani, Sclerotinia sclerotiorum, Fusarium oxysporum, Phytophthora capsici, Alternaria alternata, and Botrytis cinerea. The result showed that there was reliable antifungal activity against all of tested plant pathogenic fungi. The inhibition effects of coffee ground compost extract on the spore germination and zoospore formation were investigated. Water soluble extracts of the coffee ground compost mixture added with 10% sesame oil cake were significantly inhibited the growth of conidia germination of A. altanata and zoospore formation of P. capsici in vitro. For investigating the functional materials of coffee ground compost, it was measured the total polyphenolic compounds contents with 30 days interval during decomposing coffee ground for 90 days. The total polyphenolic content increased with decomposing periods, and it observed that the highest total polyphenolic content was $0.35{\pm}0.03mg\;GAE/g$ on the 90th day in the coffee ground compost added with 10% sesame oil cake.

• Korean Journal of Environmental Agriculture
• /
• v.29 no.4
• /
• pp.367-373
• /
• 2010

The study was established to compare fruit qualities and antioxidant compounds in 'Niitaka' pear (Pyrus pyriforia) trees grown in the organic and conventional farming systems. Fruits in the organic system appeared to have dark red color on the fruit surface. Fruit weight, soluble solids, acidity, firmness, and stone cells were not different between the farming systems. Organic fruits had a greater potassium concentration than the conventional fruits, but phosphorous, calcium, and magnesium concentrations in fruits were not different between the treatments. Peel, flesh, and juice parts in the organic fruits had greater phenolic compounds compared to the conventional fruits. Peel parts had much greater antioxidant compounds than the flesh parts, regardless of the treated-fruits. All fruits grown in the conventional and organic systems had a similar DPPH ($\alpha$, $\alpha$-diphenyl-$\beta$-picryl-hydrazyl) radical-scavenging activity in the peel, but flesh parts in organic fruits had a greater DPPH than the conventional fruits. Phenol and flavonoid compounds in the peel and flesh were positively related to the DPPH radical-scavenging activity. There were no significant differences for the nitrite scavenging activity in the peel and flesh parts between the treatments.

• Analytical Science and Technology
• /
• v.22 no.3
• /
• pp.254-262
• /
• 2009

Activated carbon fiber treated with iron compound (Fe-ACF) was employed for preparation of Feactivated carbon fiber/$TiO_2$ (Fe-ACF/$TiO_2$) composite catalysts. Then, the prepared Fe-ACF/$TiO_2$ composite catalysts were characterized by employing BET, SEM, XRD and EDX instruments. It showed that BET surface area was related to adsorption capacity for each composite. The SEM results showed that ferric compound and titanium dioxide were distributed on the surfaces of ACF. The XRD results showed that Fe-ACF/$TiO_2$ composite mostly contained an anatase structure with a Fe mediated compound. EDX results showed the presence of C, O, and Ti with Fe peaks in Fe-ACF/$TiO_2$ composites. From photocataytic degradation effect, it was observed in the organic dye (Methylene blue, MB) degradation by these composites. Different degradation effect can be attributed to the synergetic effects of photo-Fenton reaction of Fe. It was considered that the combined reactions of Fe-ACF/$TiO_2$ produce powerful photo-Fenton process in the MB degradation.

• Ocean and Polar Research
• /
• v.28 no.1
• /
• pp.45-56
• /
• 2006

This study investigated primarily the toxic effects of bis(tributyltin)oxide (TBT) and DDT (Dichlorodiphenyltrichloroethane) on the mortality of adult Acartia omorii and barnacle nauplii as well as the hatching rate of A. omorii. Subsequently, compound effects of TBT and DDT on the mortality of immature copepods were tested in order to assess whether or not synergistic influence existed in the mixture of sublethal concentration of two pollutants. Mortality of adult A. omorii increased as exposure concentration of DDT increased in the range of from 0.0001 to 1ppm. Egg hatching rate of the copepod showed no distinctive difference in the range between 0.1 and 10ppm, while barnacle nauplii showed abnormal motility of their appendages in the range of 0.0001 to 1 ppm. Mortality of adult A. omorii increased as TBT concentration increased within the range of 1 and 10 ppb, whereas egg hatching rate of the copepod showed no linear response to the same exposure range. Moreover, copepod nauplii were almost motionless even though copepod eggs hatched under the exposure condition of TBT $(0{\sim}10 ppb)$ and DDT $(0{\sim}10 ppm)$, respectively, suggesting that the nauplii are hard to develop into adult stage. On the basis of the sublethal concentration less than the 24-h $LC_{50}$, 0.001 ppm (DDT) and 2 ppb (TBT) were selected to confirm the compound effects of two pollutants on the mortality of immature copepods. Mortality of immature copepods under the condition of mixture of the two pollutants was higher than that in the single exposure condition. This result seems to indicate that synergistic effects of sublethal toxicants can make a more hazardous effect on the survival of immature copepods even though the concentration of single toxicant is not lethal to copepods in the marine environment.

• Journal of environmental and Sanitary engineering
• /
• v.18 no.1
• /
• pp.58-67
• /
• 2003

The characteristics of the commercial garbage-decomposing accelerant, Raw Material of Pomia(RMP), Pomia and Vitabio. were analyzed. In HPLC pattern, Pomia and Vitabio showed main peak of about 30kDa in 280nm wave length. RMP, Pomia and Vitabio showed three, two and two peaks in 210nm. K and Na ion content of RMP were 2,620 and 1,590ppm, respectively, and their content were the largest one among others. Ca, Mg and Mn ion content of RMP were also the largest one, but Zn ion content was the least one. $Cl^{-}$, $F^{-}$ and $NO_3^{-}$ ion content of RMP were the largest one, especially $Cl^{-}$ content was 3,553ppm. pH values of RMP and Pomia were in neutral region, but Vitabio was 9.03. Dried residue content of RMP, Pomia and Vitabio were 1.4%, 0.55% and 0.4%, respectively. The number of general bacteria on PCA plate from RMP, Pomia and Vitabio were 2.2{\times}10^{6}cfu/ml,{\;}6.5{\times}10^{3}cfu/ml{\;}and{\;}1.1{\times}10^{3}cfu/ml$, respectively. The number of facultative anaerobes of RMP was $4.4{\;}{\times}{\;}10^{4}cfu/ml$, and it was biggest one. Lactobacilli and yeasts were found less than 10cfu/ml at best. The bacterium exists in RMP in high frequency was identified as Bacillus subtilis. Volatile sulfur compound amount of garbage samples treated with Pomia and Vitabio in concentration of 1/500 at $33^{\circ}C$ for 8 days were 1,273ppb and 1,902ppb, respectively, and control showed 3,015ppb. Volatile organic compound amount of the garbage samples treated were 68,312ppb, 124,317ppb and 263,954ppm, respectively. Diethylamine that known as malodor compound were 5,107ppb, 261ppb and 11,124ppb, respectively.

• The Korean Journal of Pesticide Science
• /
• v.2 no.1
• /
• pp.18-23
• /
• 1998

In order to obtain leading compound for the development of new pesticide through the organic synthesis of natural products, the synthesis of ricinine, an active compound of Ricinus communis, was established and biological activities of synthetic compounds against insects were examined. The synthetic scheme of ricinine was composed of four steps by the spontaneous condensation of the cyanoacetyl chloride. A modified synthetic process was also estabilshed to enhance the synthetic yield by simple cyclization of ethoxymethylene malononitrile. In the bioassay results of synthetic ricinine and intermediates on four insects, the mortality of ricinine on brown planthopper (BPH, Nilaparvata lugens) and pea weevil(PW, Bruchus rufimanus) was 80% and 75% at the concentration of 1,000 ${\mu}g/ml$ respectively. Chloronorricinine and chlororicinic acid having chloride group in molecular structure gave 60% mortality on two-spotted mite (TSSM, Tetranychus urticae) at the concentration of 500 ${\mu}g/ml$. The mortality of compounds on house mosquito (HM, Culex pipens pallens) was meager at 10 ${\mu}g/ml$ level.

• The Plant Pathology Journal
• /
• v.20 no.1
• /
• pp.52-57
• /
• 2004

Sclerotinia sp. (isolate BWC98-105) causes stem blight and root rot in Leghum sp., and is presently being evaluated as a potential mycoherbicide for the control of Trifoliorium repens. Bioassays have shown that Sclerotinia sp. produces phytotoxic substance which is biologically active against T. repens. Two biologically active compounds, designated as compoundsI and II, were produced in vitro from the culture filtrate of BWC98-105 isolate Sclerotium sp. Compounds I and II were purified by means of liquid-liquid extraction and $C_{18}$ open column chromatography (300 ${\times}$ 30 mm, i.d). To determine the purity, the purified compounds were analyzed by RP-HPLC. The analytical RP-HPLC column was a TOSOH ODS-120T (150 ${\times}$ 4.6 mm i.d, Japan), of which the flow rate was set at 0.7 mL/min using the linear gradient solvent system initiated with 15 % methanol to 85 % methanol for 50 min with monitoring at 254 nm. Under these RP-HPLC conditions, compounds I and II eluted at 3.49 and 4.13 min, respectively. Compound II was found to be most potent and host specific. However, compound I had a unique antibiotic activity against phytopathogenic bacteria like bacterial leaf blight (Xanthomonas oryzae) on rice, where it played a less important role in producing toxicity on T. repens. No toxin activity was detected in the water fraction after partitioning with several organic solvents. However, toxin activity was detected in the ethyl acetate and butanol fractions. In the leaf bioassay using compound II, the disease first appeared within 4-5 h as water soaked rot, which subsequently developed into well-defined blight affecting the whole plant.