• Journal of Korean Society for Atmospheric Environment
• /
• v.23 no.1
• /
• pp.64-73
• /
• 2007

The catalytic activity of transition metals (Cu, Co, Mn, Fe and Ni) supported on ${\gamma}-Al_2O_3$ for the oxidation of toluene was investigated in the microreactor of fixed-bed type. The catalytic activity of transition metals for the oxidation of toluene turned out to be increasing in the order of Ni$Cu/{\gamma}-Al_2O_3$ catalysts for the oxidation of toluene increased with the increasing loadings of copper, reached the maximum activity at 5% loadings of copper, and decreased with higher loadings of copper in the catalysts. The activity of $Cu/{\gamma}-Al_2O_3$ catalysts for the oxidation of toluene decreased with the increasing calcination temperatures. This might result from the decreasing surface area of catalysts due to the sintering of copper oxide as well as ${\gamma}-Al_2O_3$ supports. The 5wt% $Cu/{\gamma}-Al_2O_3$ catalysts calcined at $400^{\circ}C$ for 4 hrs in the air showed the highest activity for the oxidation of toluene. Mutual inhibition was observed for the binary mixture of toluene and xylene. The activity of the easy-to-oxidize toluene was greatly decreased while the difficult-to-oxidize xylene was slightly decreased in the binary mixture of toluene and xylene. It might suggest that the inhibition of toluene and xylene in the binary mixture resulted from the competitive adsorption for the adsorbed oxygen on the catalytic surface.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.6
• /
• pp.797-805
• /
• 2012

Contribution of immobilized media with bacteria to the odor removal was evaluated in a lab scale bio-filter compared to that with sponge or ceramic media without the immobilized bacteria. Candida tropicalis for volatile organic compounds and ammonium oxidizing bacteria (AOB) for inorganic compounds were used as seeds in lab-scale bio-reactors. Three different type of media in the bio-reactors that immobilized bioreactor (IBR), sponge bioreactor (SBR), and ceramic bioreactor (CBR) were examined, respectively. An empty bed contact time (EBCT) of the bio-filters was fixed as 60 seconds, and the inlet concentration of toluene was changed from 20 ppm to 200 ppm to observe the removal efficiency depending on the concentrations. As a result, the maximum elimination capacities of IBR, SBR, and CBR were 166 $g/m^3/hr$, 138 $g/m^3/hr$, and 138 $g/m^3/hr$, respectively. In addition, toluene as an organic compound and ammonia as an inorganic compound were applied together with different inlet concentrations varied from 80 ppm to 250 ppm of toluene and from 2.5 ppm to 40 ppm of ammonia. The toluene maximum elimination capacities in IBR, SBR, and CBR were 97.4 $g/m^3/hr$, 59.5 $g/m^3/hr$, and 81.9 $g/m^3/hr$, respectively. The ammonia maximum elimination capacities were reached as 7.2 $g/m^3/hr$ in IBR, 6.6 $g/m^3/hr$ in SBR, and 7.0 $g/m^3/hr$ in CBR.

• Korean Journal of Microbiology
• /
• v.20 no.4
• /
• pp.210-222
• /
• 1982

Coliphages isolated from Han-River from September 1980 to August 1981 were classified by morphological and physiological characteristics. Effects of soil metrial on the fate of coliphage in nature were investigated. 1. The correlation coefficient between coliphage and E.coli which was host of coliphages in nature was 0.7173 (p=0.004). 2. Coliphage I isolated from Han-River of which DNA molecular weight was $27{\times}10^6$ daltons was identified as $T_1$ phage and coliphage II of which DNA molecular weight $72{\times}10^6$ daltons was classified as $T_5$ phage. 3. Soil material SW was composed of 63.65% silt and 21.92% clay. Clay was consisted of illite, kaolinite and chlorite evenly. Soil material J was composed of 68.92% silt and 11.67% clay. Clay consisted of smectite only. 4. Coliphage was absorbed to soil material J more than soil material SW, and $T_1$ coliphage was absorbed to soil material more than $T_5$ coliphage was. 5. The phage adsorption efficiency to soil material was enhanced at lower pH : the phage adsorption efficiency at pH 4 was 27 time higher than at pH 7. 6. Divalent $(Ca^{2+})\;and\;trivalention\;(Al^{3+})$ enhanced the phage adsorption efficiency to soil material from 4 to 39 and from 17 to 91 times higher than monovalent $ion(Na^+)$, respectively. 7. The concentration of organic compound was inversely related to the phage adsorption efficiency to soil. 8. Adsorption of phage onto soil material, and elution efficiency of elutants was in the order of D.D.W>tap water>river water>seawater. 9. The higher the concentration of organic compound was, the more were adsorbed phages to soil eluted. 10. Coliphages survived longer in sterile soil suspension than in nonsterile soil material suspension.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.1 no.2
• /
• pp.33-40
• /
• 2000

The present invention relates to a absorption rotor for removed VOC(volatile organic compound) and humidity in semiconductor clean room system. A absorption rotor medium is made by NaX zeolite and TS-1 zeolite formed on a honeycomb matrix of ceramic papers. The crystallization of NaX zeolite was hydrothermal reaction, and NaX zeolite crystals of a uniform particle size of 5$\mu$m were synthesized that NaX zeolite seed crystals (2~3$\mu$m) added in a batch composition at levels of 3~15 wt$\%$. The seeding resulted in an increase in the fraction of large crystals compared with unseeded batches and successfully led to a uniform NaX zeolite crystal. The microporous zeolite-type titanosilicate(TS-1) was synthesized by different of the reactant solution pH. The pH range of reactant solution has been changed from 10.0 to 11.5 TS-1 zeolite (ETS-10), having a large pore(8~10 $\AA$), was synthesized at 10.4 of pH, since TS-1 zeolite (ETS-4), having a small pore(3~5$\AA$), was synthesized at 11.5 of pH.

• Mycobiology
• /
• v.44 no.3
• /
• pp.162-170
• /
• 2016

In this paper, we demonstrate the ability of Arabidopsis thaliana to detect different mixtures of volatile organic compounds (VOCs) emitted by the common indoor fungus, Aspergillus versicolor, and demonstrate the potential usage of the plant as a bioindicator to monitor fungal VOCs in indoor air. We evaluated the volatile production of Aspergillus versicolor strains SRRC 108 (NRRL 3449) and SRRC 2559 (ATCC 32662) grown on nutrient rich fungal medium, and grown under conditions to mimic the substrate encountered in the built environment where fungi would typically grow indoors (moist wallboard and ceiling tiles). Using headspace solid phase microextraction/gas chromatography-mass spectrometry, we analyzed VOC profiles of the two strains. The most abundant compound produced by both strains on all three media was 1-octen-3-ol. Strain SRRC 2559 made several terpenes not detected from strain SRRC 108. Using a split-plate bioassay, we grew Arabidopsis thaliana in a shared atmosphere with VOCs from the two strains of Aspergillus versicolor grown on yeast extract sucrose medium. The VOCs emitted by SRRC 2559 had an adverse impact on seed germination and plant growth. Chemical standards of individual VOCs from the Aspergillus versicolor mixture (2-methyl-1-butanol, 3-methyl-1-butanol, 1-octen-3-ol, limonene, and ${\beta}-farnesene$), and ${\beta}-caryophyllene$ were tested one by one in seed germination and vegetative plant growth assays. The most inhibitory compound to both seed germination and plant growth was 1-octen-3-ol. Our data suggest that Arabidopsis is a useful model for monitoring indoor air quality as it is sensitive to naturally emitted fungal volatile mixtures as well as to chemical standards of individual compounds, and it exhibits relatively quick concentration- and duration-dependent responses.

• Journal of the Microelectronics and Packaging Society
• /
• v.14 no.4
• /
• pp.71-77
• /
• 2007

In this study, the mechanical and electrical properties of three different ball grid array (BGA) solder joints, consisting of Sn-37Pb, Sn-3.5Ag and Sn-3.5Ag-0.75Cu (all wt.%), with organic solderability preservative (OSP)-finished Cu pads were investigated as a function of reflow number. Based on scanning electron microscopy (SEM) analysis results, a continuous $Cu_6Sn5$, intermetallic compound (IMC) layer was formed at the solder/substrate interface, which grew with increasing reflow number. The ball shear testing results showed that the shear force peaked after 3 reflows (in case of Sn-Ag solder, 4 reflows), and then decreased with increasing reflow number. The electrical property of the joint gradually decreased with increasing reflow number.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.7 no.1
• /
• pp.3-18
• /
• 1997

This study was conducted to evaluate desorption efficiencies by types of desorption solvent for polar and non-polar organic compounds collected on activated charcoal tubes. Analytes tested were toluene, m-xylene, isobutyl alcohol, n-butyl alcohol, cellosolve acetate, and butyl cellosolve. Three different concentration levels of spiked sample were made. Types of cosolvent mixed with the main solvent, $CS_2$, were methanol, pentanol, and dimethylformamide (DMF) and the cosolvent for methylenechloride was methanol. The amounts of cosolvent added to the main solvent were 1, 5, and 10% by volume (v/v%), respectively. The results were as follows: 1. For all mixed solvents except 1% methanol and 1% pentanol with $CS_2$, desorption efficiency significantly increased, compared with that of $CS_2$ alone. 2. Desorption efficiency increased by increasing analyte loading on charcoal tube regardless of mixed solvents used and the material polarity. 3. For all cosolvents mixed with $CS_2$ by 1% and 5% volume, desorption efficiency for non-polar compound was significantly higher than that of polar compound. For the 10% mixed solvents and the methylenechloride mixed with methanol, the results were opposite. 4. The lowest mean percent bias of 4.79% was obtained from the 5% DMF-$CS_2$ mixed solvent, followed by 4.82% from the 10% DMF-$CS_2$ solvent while the highest bias of 23.26% was from the solvent of $CS_2$ alone. Based on the results of this study, in order to increase desorption efficiency, it is recommended to add such cosolvents as methanol, pentanol, and DMF to $CS_2$, preferably 5% by volume for analyzing polar compounds collected in charcoal tubes.

• Journal of Animal Environmental Science
• /
• v.19 no.2
• /
• pp.89-94
• /
• 2013

This study was performed to investigate the effect of beet plup and IRG (Italian ryegrass) dry powder in fattening pig diet on reducing concentration of odorous compounds in the pig slurry. Fifty fattening boars [(Landrace ${\times}$ Yorkshire) ${\times}$ Duroc] were randomly assigned to one of 3 treatments (control, beet plup 5%, and IRG 5%). Pigs (BW 50~110 kg) were fed diets formulated to meet the Korean Feeding Standard (2012) and their excretion was collected from the slurry pits. Short chain fatty acid (SCFA) and branched chain fatty acid (BCFA) were higher in beet plup (31,786, 3,985 ppm) and IRG (32,755, 4,261 ppm) treatments, which was not different among treatments (p>0.05), compared to control (p<0.05). Concentrations of phenols and indoles were highest in beet plup (183.83, 168.59 ppm) and IRG (9.32, 8.92 ppm) treatments. Altogether, addition level of two contents was not appropriate to decrease concentration of odorous compounds.

• Journal of Animal Environmental Science
• /
• v.19 no.2
• /
• pp.101-108
• /
• 2013

This study was to investigate the effect of addition levels of odor reducing contents on reducing the concentration of odorous compounds. Slurry treatments included three levels mixture of horseradish powder (HP), mushroom waste (MW) and probiotics powder (PP), and non-treatment control (n=4 each group). Levels of odorous compounds were measured from the liquid slurry incubated in room temperature ($20{\sim}25^{\circ}C$) for 2 wk in chamber whose structure is similar to slurry pit. Concentration of phenols and indoles was lower (p<0.05) in level 1, which was mixed HP 0.01%, MW 0.4% and PP 0.004% (98.69, 1.87 ppm) compared to control. Short chain fatty acid (SCFA) and branched chain fatty acid (BCFA) was lowest (p<0.05) level 1 (6,557, 1675 ppm). Taken together, lower level are effective in reducing odorous compounds in pig slurry.

• The Korean Journal of Mycology
• /
• v.15 no.4
• /
• pp.224-230
• /
• 1987

Effects Of organic compound, photosensitizer and $K^+$ ion influx. On the light-induced ATPase of mitochondria in L. edodes purified by linear sucrose density gradient centrifugation were studied. The mitochondrial ATPase activity was investigated by various wavelength illumination at dark state. The mitochondrial ATPase was activated 139% and 128% by 10m mol dithiothreitol and 0.1m mol quinacrine, respectively. This enzyme also was activated 36% by 0.1m mol phenazine methosulfate as photosensitizer. But, 100 mg oligomycin and 1m mol phlorizin inhibited activity of enzyme to 48% and 45%, respectively. Its optimum wavelength was 690 nm on the effect of $K^+$ ion influx, its optimum pH and temperature were found to be 7.2 and $55^{\circ}C$.