• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.503-509
• /
• 2019

The demand for smaller, faster, and multi-functional mobile devices in increasing at a rapidly increasing rate. In response to these trends, Stacked Chip Scale Package (SCSP) is used widely in the assembly industry. A film type adhesive called die attach film (DAF) is used widely for bonding chips in SCSP. The DAF requires high flowability at high die attachment temperatures for bonding chips on organic substrates, where the DAF needs to feel the gap depth, or for bonding the same sized dies, where the DAF needs to penetrate bonding wires. In this study, the mixture design of experiment (DOE) was performed for three raw materials to obtain the optimized DAF recipe for low elastic modulus at high temperature. Three components are acrylic polymer (SG-P3) and two solid epoxy resins (YD011 and YDCN500-1P) with different softening points. According to the DOE results, the elastic modulus at high temperature was influenced greatly by SG-P3. The elastic modulus at $100^{\circ}C$ decreased from 1.0 MPa to 0.2 MPa as the amount of SG-P3 was decreased by 20%. In contrast, the elastic modulus at room temperature was dominated by YD011, an epoxy with a higher softening point. The optimized DAF recipe showed approximately 98.4% pickup performance when a UV dicing tape was used. A DAF crack that occurred in curing was effectively suppressed through optimization of the cure accelerator amount and two-step cure schedule. The imizadole type accelerator showed better performance than the amine type accelerator.

• Korean Journal of Organic Agriculture
• /
• v.18 no.4
• /
• pp.527-539
• /
• 2010

This study was conducted to determine the effect of probiotics as an alternative for antibiotics on growth performance, nutrient digestibility, noxious gas emission and fecal microbial population in growing piglets. A total of 96 piglets ($22.5{\pm}1.3$kg average body weight) were allotted to 3 different treatment groups and replicated 4 times with 8 piglets per replicate in randomized complete block design. Treatments were T1) (Control, basal diet+0.2% antibiotics), T2) 0.2% probiotics complex and T3) 0.3% Bacillus probiotics. During the whole experiment period, there were no differences (p>0.05) in average daily gain (ADG), average daily feed intake (ADFI) and feed efficiency. However, digestibility of dry matter, crude protein, ether extract, nitrogen free extract and crude ash were showed higher in probiotics groups (T2 and T3) than those of control. In noxious gas emission, ammonia, amine, hydrogen sulfide and mercaptan were significantly (p<0.05) reduced in T2 and T3 treatments compared to those in control. Moisture content of feces was not significantly different among treatments. The colony forming units (CFU) of total bacteria, E. coli and thermoduric bacteria in feces were significantly different among treatments. The CFU of total bacteria, E. coli and thermoduric bacteria in T3 treatment were reduced by feeding probiotics B. From this study, we suggest that probiotics A and B are likely able to improve the growth performance and nutrients digestibility, reduce noxious gas emission and change the fecal microbial composition in growing piglets.

• Korean Journal of Weed Science
• /
• v.10 no.2
• /
• pp.114-121
• /
• 1990

Inactivation in soil absorption, translocation of 2, 4-D by plants vary depending upon soil environments and herbicide formulations. Experiment was conducted in a glasshouse using rectangular pots($1350cm^2$) to evaluate the growth responses of barnyardgrass (Echinochloa crus-galli) and Indian jointvetch (Aesehyrcomene indica) to two formulations of 2, 4-D. The formulations used were 40% 2, 4-D amin salt (2, 4-D/AS) and 19.7% complex of rice husk lignin and 2, 4-D (2, 4-D/LG) which were applied at 200g ai/ha. Soil environments included fertilizer levels, soil pH, organic matter contents, and soil textures, Each treatment was replicated three times. The herbicidal activity of 2.4-D increased and lasted with increased levels of fertilizer. The activity also increased and lasted with low soil pH and decreased content of organic matter. Generally 2, 4-D/LG showed higher and longer herbicidal activity than 2. 4-D/AS for both test plants under all conditions applied. However, the herbicidal activity was influenced by the formulations more than by soil textures. It was thought that 2, 4-D/AS was released in a short time and inactivated readily while 2, 4-D/LG was slowly released and gave an opportunity of absorption by plants for a long period.

• Clean Technology
• /
• v.21 no.1
• /
• pp.76-82
• /
• 2015

Volatile organic compounds (VOC) free adhesives have been interested by many scientists and engineers due to environmental regulations and the safety of industrial workers. In this work, a series of composites composed with bisphenol A epoxy resin used as solvent, dicyandiamide, and promoter were prepared to investigate the most appropriate molar ratio for steel-steel adhesion. The cured test specimen of each composite were measured with universal testing machine (UTM) to figure out mechanical properties such as tensile strength, Young’s modulus, and elongation. Furthermore, the lap shear strength of the specimen was tested with UTM while impact resistance was measured with Izod impact tester. The composite whose molar ratio of epoxy resin to curing agent is 1 : 0.9 (sample 3), showed better tensile strength, coefficient of elastic modulus, elongation, and impact strength than other composites did. The highest tanδ from dynamic mechanical analysis (DMA) was observed from sample 2 (epoxy resin: dicy = 1 : 0.7) while sample 3 showed slightly lower tanδ than that of 2. The morphology of the fracture surface of the cured composites from SEM showed that the number of subtle lines on the surface caused by impact increase as the contents of amine curing agent accrete. Furthermore, the viscosity change of sample 5 (epoxy resin: dicy = 1 : 1.3) was observed to confirm its storage stability.

• Korean Journal of Food Science and Technology
• /
• v.15 no.2
• /
• pp.141-149
• /
• 1983

The purpose of the present work is to find out the optimal conditions for the production of filefish protein preparations and to define the functional properties of the protein products. Fish protein concentrate (FPC) and fish protein isolate (FPI) were prepared by extraction of whole or headed and gutted filefish with various organic solvents. The results of the present study are as follows; 1. Among the solvents tested iso-propyl alcohol appeared to be the most effective for the extraction of lipid and also for that trimethylamine from the fish muscle. 2. The optimal extraction time showed to be 20 minutes with ethyl iso-propyl alcohol at $65-70^{\circ}C$under adequate mixing. 3. The most effective solvent ratio to the weight of fish material was proved to be 5:1 at the first extraction and to be 2:1 at the second stage. 4. The lipid content of the protein preparations reduced to below 0.5% by the third stage of extraction of headed or gutted filefish. The protein concentrate from whole fish, however, showed the lipid content of 0.27-0.31% only after the fifth stage of extration. 5. The protein contents of the protein concentrate and the protein isolate from whole filefish were 81.08% and 87.41% and the lipid contents of the two protein preparations were 0.43% and 0.45% respectively. 6. Higher calcium content was found in the protein concentrate rather than in the protein isolate. No sodium and potassium in the protein isolate were detected while the fish concentrate appeared to contain a considerable amounts of both elements. 7. The functional properties, such as suspended solids, wetability, emulsion stability and foam viscosity of the filefish protein isolates were proved to be higher than those of the protein concentrate.