• Bulletin of the Korean Chemical Society
• /
• v.25 no.6
• /
• pp.913-916
• /
• 2004

• Journal of Trauma and Injury
• /
• v.19 no.2
• /
• pp.183-187
• /
• 2006

An increase has been see in fall injuries at construction sites and in penetrating injuries by iron bars or pipes associated with the fall. In particular, a thoraco-abdominal penetrating injury had the worse prognosis, and multiple organ injury occurred because of blunt trauma associated with fall. Iron bars were the most common penetrating materials, and pipe penetrating injuries were uncommon. However, because the diameter of the pipes were large than those of the bars, penetrating injuries associated with pipes were more often fatal. A secondary thoraco-abdominal injury worsened the prognosis. We reported a case of a 33-year-old man with a thoraco-abdominal trauma secondary to a penetrating injury with a scaffolding pipe following a fall.

• Journal of Korean Association for Spatial Structures
• /
• v.2 no.1 s.3
• /
• pp.67-73
• /
• 2002

Measurement of fluctuating pressure by tube system is carefully designed due to the organ-pipe resonance. It is necessary to correct the pressure before analysis. The three method for correction the distortion fluctuation pressure short tube length and the frequency response functions and insert a restrictor in the tube to increase the damping. The first method is useful when the tube length is short. In second method, the distorted signal through the tubing transformed into the frequency domain, dividing by transfer function and inverse fourier transforming back into the time domain gives the required pressure signal. In this paper three types of tubing which have different length of 100cm, 150cm, 200cm were experimented the distorted signal and correct the distortion signal

• Journal of Radiation Protection and Research
• /
• v.47 no.2
• /
• pp.93-98
• /
• 2022

Background: This study aims to derive the characteristics of each work type for industrial radiography based on empirical evidence through expert advice and a survey of radiation workers of various types of industrial radiography. Materials and Methods: According to a Korean report, work types of industrial radiography are classified into indoor tests, underground pipe tests, tests in a shielded room (radiographic testing [RT] room test), outdoor field tests, and outdoor large structure tests. For each work type, exposure geometry and radiation sources were mainly identified through the expert advice and workers' survey as reliable empirical evidence. Results and Discussion: The expert advice and survey results were consistent as the proportion of the work types were high in the order of RT room test, outdoor large structure test, underground pipe test, outdoor field test, and indoor test. The outdoor large structure test is the highest exposure risk work type in the industrial radiography. In most types of industrial radiography, radiation workers generally used ¹⁹²Ir as the main source. In the results of the survey, the portion of sources was high in the order of ¹⁹²Ir, X-ray generator, ⁶⁰Co, and ⁷⁵Se. As the exposure geometry, the antero-posterior geometry is dominant, and the rotational and isotropic geometry should be also considered with the work type. Conclusion: In this study, through expert advice and a survey, the external exposure characteristics for each work type of industrial radiography workers were derived. This information will be used in the reconstruction of organ dose for health effects assessment of Korean radiation workers.