• Journal of the Korean Ceramic Society
• /
• v.24 no.3
• /
• pp.282-288
• /
• 1987

Diffusion of Cl- ion in hardened cement paste with slag and siliceous powder such as silica fume and white carbon was investigated. The addition of admixtures reduces the content of Ca(OH)2, which is the main cause of pore formation by corrosive action of sea-water. The addition of admixtures makes the hardened cement paste dense, thereby restricting the diffusion of Cl- ion and improving the resistance to sea-water. Apparence diffusion coefficient of Cl- ion in hardened ordinary portland cement paste was 3.7${\times}$10-8$\textrm{cm}^2$/sec, while that for the hardened cement paste with the admixture was 1.2∼3.2${\times}$10-8$\textrm{cm}^2$/sec.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.05a
• /
• pp.151-156
• /
• 2002

Drying shrinkage cracking which may be caused by the relatively large specific surface is a matter of grave concern for latex modified concrete(LMC) overlay and rapid-setting cement latex modified concrete(RSLMC) overlay. LMC and RSLMC were studied for field applications very actively in terms of strength and durability in Korea. However, there were no considerations in drying shrinkage. Therefore, the purpose of this study was to investigate the drying shrinkage properties of LMC and RSLMC with the main experimental variables such as cement types(ordinary portland cement, rapid setting cement), latex contents(0, 5, 10, 15, 20%), W-C ratios, and curing days at a controlled environment of 60% of relative humidity and 2$0^{\circ}C$ of temperature. The drying shrinkage for specimens was measured with a digital dial gauge of Demec. The test results showed that the drying shrinkage of LMC and RSLMC were considerably lower than that of OPC and RSC, respectively. This might be attributed to the interlocking of hydrated cement and aggregates by a film of latex particles, water retention due to hydrophobic, and colloidal properties of the latexes resulting in reduced water evaporation.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05b
• /
• pp.25-28
• /
• 2006

This study investigated pre-mixed cement combined with ordinary portland cement, BF and SF, in order to manufacture cement binder, which is possible to produce 150MPa ultra high strength concrete. The BF used in this study reduces and control hydration heat. It can also improve concrete fluidity, while AP increases hydration product and accelerates reaction of BF. SF has micro filler effect and makes pozzolanic reaction. It also fabricates high density internal organization. This developed pre-mixed cement can reduce hydration heat and increase hydration product. It is possible to fabricate high density organization and to secure homogeneity. The mock-up test of ultra high strength concrete showed excellent dispersibility and workability and indicated compressive strength more than 150MPa at 28 days.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.11a
• /
• pp.527-532
• /
• 2003

When fresh concrete is exposed to sufficiently low temperature, the free water in the concrete is cooled below its freezing point and transforms into ice, which causes decrease in compressive strength of concrete. Of the many influencing factors on the loss of compressive strength, the age of concrete at the beginning of freezing, water-cement ratio, and cement-type are significantly important. The objective of this study is to examine how the these factors affect the compressive strength of concrete frozen at early ages. The results from the tests showed that as age at the beginning of freezing is delayed and water-cement ratio is low, the loss of compressive strength decreases. In addition, concrete made with high-early-strength cement is less susceptible to frost damage than concrete made with ordinary portland cement.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.04a
• /
• pp.126-129
• /
• 2000

To investigate the influence of kinds of cement on state of high-strength concrete, this study deals with the engineering properties of high-strength concrete used 4 kinds of ordinary portland cement. The result of this study be summarized as follows. 1) It appeared that the change in fluidity with time differ with kinds of cement. 2) The difference of setting time was seen over 3 hours according to kinds of cement. Therefore, it must be examined about used materials when high-strength concrete is manufactured in the construction field.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.727-730
• /
• 2003

The objective of this work is to understand the deterioration mode of ordinary portland cement pastes and mortars immersed in 5% sodium sulfate solution for 510 days. In order to achieve the goal, x-ray diffraction (XRD) and scanning electron microscopy (SEM) are presented in this experimental work. Strength deterioration (SDF) and length change of the mortars were also measured to evaluate resistances to the attacking solution. The mortars were prepared by using water-cement ratio of 35%, 45% and 55%, respectively, and the water-cement ratio of pastes was fixed at 45%. Conclusively, the deterioration by sodium sulfate attack was primarily due to the formation of ettringite and thaumasite. This process of deterioration may submit the reasonable understanding on the sulfate attack mechanism of hardened cement pastes, mortars, and concretes.

• Geomechanics and Engineering
• /
• v.33 no.2
• /
• pp.211-219
• /
• 2023

This study analyzes the changes in the physical properties of grout by irradiating it with ultrasonic energy and assesses the injectability of the grout into deep rock fractures. The materials used in the research are OPC (Ordinary Portland Cement) and MC (Micro Cement), and are irradiated depending on the water/cement ratio. After irradiating the grout with ultrasonic energy, viscosity, compressive strength, and particle size are analyzed, and the results of the particle size analysis were applied to Nick Barton's theory to evaluate the injectability of the grout into deep rock fractures under those conditions. It was found that the viscosity of the grout decreased after ultrasonic wave irradiation, and the rate of viscosity reduction tended to decrease as the water/cement ratio increased. Additionally, an increase in compressive strength and a decrease in particle size were observed, indicating that the grout irradiated with ultrasonic energy was more effective for injection into rock fractures.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.04a
• /
• pp.184-185
• /
• 2022

This study researched the effect of graphene nanoribbons (0.05 wt%) on cement-based materials' mechanical and electrical properties. The results were compared with the ordinary Portland cement (OPC) paste and OPC paste with the same content of carbon nanotubes. The experiment results showed that after curing for 28 days, the compressive and splitting tensile strength of the sample with graphene nanoribbons were increased by 17.8% and 6.6% compared to OPC paste, and its reinforced effect for cement-based materials was superior to carbon nanotubes. Besides, due to the excellent electrical properties of graphene nanoribbons, the sample reinforced by graphene nanoribbons had a lower electrical resistivity (135.5 Ω·m) than OPC paste (418.5 Ω·m) and paste with carbon nanotubes (175.5 Ω·m). This proved the promising application of graphene nanoribbons on cement-based materials.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.125-126
• /
• 2023

This work explores the effectiveness of graphene nanoribbons (GNRs) in modifying the fire resistance of cement paste. The GNRs are added to the ordinary Portland cement at 0.10 wt% of the cement, and the sample is heated to target temperatures after curing for 28 days. Subsequently, the variations of compressive strength and pore structure are inquired by compared to the control sample without nano reinforcing and the sample with the same amount of carbon nanotubes (CNTs).

• The Journal of Engineering Geology
• /
• v.28 no.1
• /
• pp.61-67
• /
• 2018

Grouting is reinforcement or cutoff method which uses the hardening agent which is typically represented by portland cement and injected into the ground or the structure. When mixing the cement in powder form with water, the particles tend to cohere each other. Once they cohered, the particle size tends to become larger while injection efficiency becomes lower. This study, in a bid to reduce the cohesion of cement, the screen was set inside the grout mixer so that the cement particles are separated while vibrating them. To validate the effect of vibration screen, comparison test was conducted by using ordinary portland cement, slag cement and micro cement. Viscosity test, bleeding test and grain-size analysis indicated that the characteristics varied significantly after passing through the vibration filter. It is expected that the vibration filter installed inside the grout mixer will reduce the cement cohesion when mixing with water.