• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1141-1143
• /
• 2005

This paper presents the reasonable design parameters of a SRM for hybrid electric vehicle driving. For the design of SRM, the initial model is designed using the equivalent magnetic circuit method. In order to optimize the SRM for HEV. The initial model is redesigned by FEM with the variation of the stock length and turns of winding. This paper shows that a flat-topped current of a phase can be made from a change of the stack length and the number of turns for high efficiency, high average torque and a lower torque ripple. The change of current falling time as a variation of turn-off angle was shown by FEA. The iron loss and copper loss were described. The torque of the redesigned motor is suitable for low and high speed ranges to drive a HEV that was verified by the speed-torque curve.

• 대한기계학회논문집A
• /
• 제26권10호
• /
• pp.2211-2218
• /
• 2002

In this study, an optimal design study has been made to determine dimensions of die and multi stress rings for extrusion process. For this purpose, a thermo-rigid-viscoplastic finite element program, CAMPform, was used fur forming analysis of extrusion process and a developed elastic finite element program fur elastic stress analysis of the die set including stress rings. And an optimization program, DOT, was employed for the optimization analysis. From this investigation, it was found out that the amount of shrink fitting incurred by the order of assembly of the die set should be taken into account for optimization when the multi stress rings are used in practice. In addition, it is construed that the proposed design method can be beneficial fur improving the tool life of cold extrusion die set.

• 한국생활과학회지
• /
• 제24권4호
• /
• pp.531-539
• /
• 2015

The purpose of this study is to analyze the aesthetic characteristic of men's costume in the Renaissance period. Fashion is a reflection of Zeitgeist. The ideal aesthetic values of each period create the concept of ideal beauty for that period. Costume represents the ideal beauty of a particular period. The aesthetic characteristic of men's costume in the age of Renaissance was analyzed in terms of four categories: the beauty of male body, sublime beauty, sensual beauty, and artistic beauty. First, for the beauty of male body, the men in the age of Renaissance enlarged their chests and shoulders by inserting a pad in them in order to express their masculine beauty of human body by emphasizing their sexual organ. Second, for the sublime beauty, men's costume was exaggerated by using a pad, a ruff collar and slash. In this period, men intended to represent their power and dignity through horizontal extension in their costume. Third, for the sensual beauty, erotic emphasis were made through physical elements. In order to show off sexual charms, men padded their costumes and introduced the codpiece. Last, for the artistic beauty in the age of the Renaissance, men's costume showed proportional, balanced and symmetrical beauty. And men's costume was made of rich brocades, which were embroidered and encrusted with jewels.

• 한국정보통신학회논문지
• /
• 제4권2호
• /
• pp.365-370
• /
• 2000

본 논문에서는 접지면의 크기가 안테나의 성능에 미치는 영향을 분석하기 위하여 기존의 프린트형 안테나의 특성 개선 요구에 부응한 안테나를 설계ㆍ제작하여 프린트형 안테나의 접지면의 크기에 따른 특성을 측정, 분석하여 최적의 접지면 크기를 산출하였다. 폴디드 안테나의 특성에 미치는 접지면 효과를 알아보기 위해 동박판을 잘라 기존의 폴디드 슬롯 안테나의 접지면을 확장시켰을 때 임피던스 및 방사 특성의 변화를 조사한 결과 임피던스 특성에는 별로 영향을 주지 않았으나, 방사 특성에는 많은 영향을 미치고 있음을 확인 할 수 있었다. 접지면의 크기를 고려한 엄격한 설계를 위해서는 복잡한 과정을 거쳐야 하지만, 접지면의 효과를 무시할 수 있는 적당한 크기를 산정하여 제작한다면 좀더 간단하게 안테나를 제작할 수 있을 것이다.

• Steel and Composite Structures
• /
• 제23권2호
• /
• pp.153-160
• /
• 2017

It is extremely important to be aware of the ballistic performances of engineering materials in order to be able to choose the lightest armor providing full ballistic protection in civil and military applications. Therefore, ballistic tests are an important part of armor design process. In this study, ballistic performance of plates made of carbon steel and cold worked tool steel against 7.62 mm AP (armor-piercing) bullets was examined experimentally and numerically in accordance with NIJ standards. Samples in different sizes were prepared to demonstrate the effect of target thickness on ballistic performance. Some of these samples were coated with titanium nitride using physical vapor deposition (PVD) method. After examining all successful and unsuccessful samples at macro and micro levels, factors affecting ballistic performance were determined. Explicit non-linear analyses were made using Ls-Dyna software in order to confirm physical ballistic test results. It was observed that the ballistic features of steel plates used in simulations comply with actual physical test results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.228-230
• /
• 2002

Recently, electric power reliability of our country has been improved. However, there are still remaining problems which are short-duration variations like instantaneous and momentary interruption and voltage sag by nature calamity ; typhoon, lightning, snow, etc. Besides, power quality ; harmonics, caused by using power electronics equipments, become a hot issue Malfunction of controller and stop machinery, and losing the important data are caused by poor power quality at a couple of second. Due to those, UPS, which is made up battery, has being used, but there are several disadvantages ; long charge and discharge time, environmental problem by acid and heavy metal, and short life time. As generally know, micro-SMES is a method to settle those mentioned. However, there need huge system apparatuses in order to verify the effect of system efficiency and stability considering the size of micro-SMES, the sort of converter type, and various conditions ; inner temperature, magnetic field, quench characteristic of micro-SMES, and etc. In this paper, in order to bring the mentioned above to a settlement, a micro-SMES is modeled with characteristics of micro-SMES is interfaced to EMTOC program using Fortran program interface method. We obtained hopeful answers and made the simulation model of micro SMES.

• 소성∙가공
• /
• 제14권6호
• /
• pp.559-564
• /
• 2005

INCONEL 718, nickel based superalloy, has good formability, high strength, excellent corrosion resistance and mechanical properties at high temperature. Owing to theses attractive properties, it is utilized in applications such as combustion system, turbine engines and nuclear reactors. In such applications, components are typically required to be tolerant of high stress impact loading. This may cause material degradation and lead to catastrophic failure during service operation. Accurate understanding of material's mechanical properties with various strain rates is required in order to guarantee the reliability of structural parts made of INCONEL 718. This paper is concerned with the dynamic material properties of the INCONEL 718 at various strain rates. The dynamic response of the INCONEL 718 at the intermediate strain rate is obtained from the high speed tensile test and at the high strain rate is from the split Hopkinson pressure bar test. The effect of the strain rate on dynamic flow stress, work hardening characteristics, strain rate sensitivity and elongation to the failure is evaluated with the experimental results. Experimental results from both the quasi-static and the high strain rate up to 5000/sec are interpolated in order to construct the Johnson-Cook model as the constitutive relation that should be applied to simulate and design the structural parts made of rNCONEL 718.

• Advances in Computational Design
• /
• 제6권1호
• /
• pp.1-13
• /
• 2021

Failure of a Multi-storeyed reinforced concrete framed structure occurs when a primary vertical structural component is isolated or made fragile, due to artificial or natural hazards. Load carried by vertical component (column) is transferred to neighbouring columns in the structure, if the neighbouring column is incompetent of holding the extra load, this leads to the progressive failure of neighbouring members and finally to the failure of partial or whole structure. The collapsing system frequently seeks alternative load path in order to stay alive. One of the imperative features of collapse is that the final damage is not relative to the initial damage. In this paper, the effect on the column and beam adjacent to statically removed vertical element in terms of axial force, shear force and bending moment is investigated. Using Alternate load path method, numerical modelling of two dimensional one bay, two bay with variation in storey heights are analysed with FE model in order to obtain better understanding of failure mechanism of multi-storeyed reinforced concrete framed structure. The results indicate that the corner column is more susceptible to progressive collapse when compared to middle column, using this simplified methodology one can easily predict how the structure can be made to stay alive in case of sudden failure of any horizontal or vertical structural element before designing.

• 한국과학교육학회지
• /
• 제16권1호
• /
• pp.1-12
• /
• 1996

The purpose of this study is to investigate the psychological hierarchy structure of science concepts and to determine the effective teaching order by comparing the teaching effects of the psychological hierarchy order with those of teaching order of the current text in order to inquire validating evaluation framework of science curriculum sequence. Key concepts were selected by tasks analysis in the seven units of elementary and secondary school curriculum. Concept formation tests were developed to evaluate each concepts achievement,. The test items were made according to each of the concepts based on 12 prototype tasks developed by Frayer(1969). To identify the students' psychological hierarchy the test items were administrated to elementary and secondary school students. Ordering theory was used to identify the students' psychological hierarchy. Nonequivalent control group pretest-posttest design was used in this study as an experimental design. Teaching with psychological hierarchy order was applied tp experimental group and teaching with concept order described in the current text was applied to control group. The major results of this study are as followings: 1. The students' psychological hierarchy structures are different from logical hierarchy structures. 2. The science teachers' psychological hierarchy structures are different from not only logical hierarchy structures but also students' psychological hierarchy structures. 3. The mean score of experimental group applied psychological hierarchy order is significantly higher(p<.05) than the control group in the concept achievement.

• 한국초전도ㆍ저온공학회논문지
• /
• 제5권1호
• /
• pp.48-51
• /
• 2003

A 1 MVA transformer with BSCCO-2223 high Tc superconducting (HTS) tapes was designed. The rated voltages of each sides of the transformer are 22.0 kV and 6.6 kV respectively. Double pancake HTS windings, which have advantages of insulations and distribution of high voltage, were adopted. Four HTS tapes were wound in parallel fer the windings of low voltage side. Each winding was composed of several double pancake windings made of four parallel conductors were transposed in order to distribute the currents equally in each conductor. A core of the transformer was designed as a shell type core made of laminated silicon steel plate and the core is separated with the windings by a cryostat with a room temperature bore. The operating temperature of HTS windings will be 65K with liquid nitrogen, and a cooling system using a cryocooler was proposed and designed conceptually. This HTS transformer is going to be manufactured in near future based on the design parameters presented in this paper.